On/off
Mode
Odor sensor
Clean/Change
Timer
Running mode
Fan Speed
Lock
Dust sensor
Mute Low High Turbo
Auto Sleep
Anion Odor
Dedust filter
Indicator light
Remote control
receiver window
Dust sensor Odor sensor
On/Off button
Mode button
AIR PURIFIER
Controller Function Manual and Operation Method
Manual of Controller Function
1. Basic Function Mode
◆ Auto Mode
The fan speed can be adjusted automatically under auto mode, but if press the FAN key on the remote controller,
the fan speed can not be adjusted. When the auto lamp is light, the corresponding fan speed lamp is light. When the
fan runs with turbo, it will runs with turbo mode, and turbo lamp is light.
When the degree of off-flavor or dust is “low”, the green lamp is light; when the degree of off-flavor or dust is “med”,
the green lamp and orange lamp are light; when the degree of off-flavor or dust is “high”, the green lamp, orange
lamp and red lamp are light.
◆ Turbo Mode
When the plasma is open and anion is close, the fan speed defaults turbo running, the turbo indicator lamp is light,
the fan speed can not be adjusted if press remote controller.
◆ Sleep Mode
The fan speed can be adjusted automatically (low and quiet will change circularly) according to the air quality, the
fan speed can not be adjusted if press remote controller, the sleep indicator lamp is light. The time is clearance
when the unit is off or shift mode.
◆ Anion Mode
When the anion is open and plasma is close, the fan speed defaults low running, the anion indicator lamp is light, the
high, low and quiet can change circularly if pressing FAN key.
◆ Clear off-flavor Mode
When the plasma is open and anion is close, the fan speed defaults high running, the clear off-flavor indicator lamp
is light, the high, low and quiet can change circularly if pressing FAN key.
2 The display function of indicator lamp
◆Operation Mode Lamp: The auto lamp is light under auto mode; the turbo lamp is light under turbo mode; the sleep
lamp is light under sleep mode; the anion lamp is light under anion mode; the anti-off flavor is light under anti-off flavor.
◆Fan speed Lamp: When the high, med, low lamp are light, that means the fan runs with high, med, low fan speed.
◆Timer Lamp: When the timer 1,2,4 lamp are light, that means the timer time is 1h, 2h, 4h respectively; when the unit is
on, the lamp is light shows setting timer is off; when the unit is off, the lamp is light shows setting timer is on, and there is
no timer when the light is dark.
◆Clear/Replace Lamp: When the “clear lamp” is blinking, that means the unit runs 480h totally and remind to clean filter.
The lamp is dark when the conditions are not satisfied or resetting after clean.
When the “clear lamp” is blinking, that means the unit runs 2000h totally and remind to replace HEPA+HIMOP filter. The
lamp is dark when the conditions are not satisfied or resetting after clean.
◆Child Lock/ Dust Induction/ Off-flavor Induction: Controlled by remote controller.
3 Functions of front panel button
There are ON/OFF button and MODE button on the front panel.
a. After the unit is first energized, press ON/OFF when the unit is off, it will run with auto mode, if turn on the unit again
it will run with the previous mode, the unit is off if pressing ON/OFF when the unit is on.
b. Press MODE when the unit is on, it will choose circularly by auto->turbo->sleep->anion->clear off-flavor->auto, and
the fan speed runs with default fan speed of each mode.
c. When the unit is stand-by, press mode key for 5S, all the indicator lamps are light and buzzer gives out beep, the
cumulate time is clearance.
