SIIG ID-SC0511-S1 Manuel utilisateur

USB to Serial Adapter Hub

(ID-SC0511-S1/ID-SC0611-S1/ID-SC0711-S1/ID-SC0811-S1)

No part of this publication may be reproduced in any form by any

means without the prior written permission. Other trademarks or brand

names mentioned herein are trademarks or registered trademarks of

their respective companies.

Disclaimer

Information in this document is subject to change without notice. The

manufacturer does not make any representations or warranties

(implied or otherwise) regarding the accuracy and completeness of

this document and shall in no event be liable for any loss of profit or

any commercial damage, including but not limited to special, incidental,

consequential, or other damage.

Safety Instructions

Always read the safety instructions carefully

Keep this User’s Manual for future reference

Keep this equipment away from humidity

If any of the following situation arises, get the equipment checked

by a service technician:

The equipment has been exposed to moisture.

The equipment has been dropped and damaged.

The equipment has obvious sign of breakage.

The equipment has not been working well or you cannot get it

work according to User’s Manual.

1. Introduction

USB-to-Serial converter provides an easy solution connection serial port as needed for

systems. USB-to-Serial functions as a converter between a USB port and standard serial

ports. We can easily connect this converter to the USB port on your PC or USB hub and

get access to any RS-232 devices such as PDAs, scanners, printers, etc. This device is

suitable for portable devices, equipments, sales-end applications.

Features

Compliant with USB 2.0 specification,Hi-Speed USB data transfer rates up

to 480Mb/s

No extra U/O or IRQ required

Support serial port data transfer rates up to 921.6 Kb/s

Serial ports with 512 byte FIFO, hardware and software flow control

support

Support USB plug-and-play

USB bus-power, no external power adapter required (Except

ID-SC0811-S1)

15KVDC ESD immunity to serial interface

Wall mount support

Package Content

Before installation, please check the package contains the following items:

USB-to-RS232 Device x1

USB cable x1

CD (Driver and User’s manual) x1

Extra for ID-SC0811-S1 only

RJ-45 to RS-232 Cable x8

Power Adapter x1

System Requirement

IBM compatible computer or Mac

Windows2000, Windows XP, Windows Vista 32/64-bit,

Windows 7, Mac 10.x

An available USB port

64 MB RAM or higher

Pentium233 MHz or higher

2. Specifications

Serial Ports

1xRS-232 (ID-SC0511-S1)

2xRS-232 (ID-SC0611-S1)

4xRS-232 (ID-SC0711-S1)

8xRS-232 (ID-SC0811-S1)

Connectors DB9 male (ID-SC0511-S1/SC0311-S1/SC0411-S1)

8-pin RJ-45 (ID-SC0811-S1)

FIFO Buffers 512 bytes

ESD Protection 15 KV ESD

Serial Communication Speed 50 b/s ~ 921.6Kb/s

Interface USB 2.0

Interface Connector USB-B female

Power Requirements Bus-Power (ID-SC0511-S1/SC0311-S1/SC0411-S1)

5V/3A DC (ID-SC0811-S1)

Operation Temperature 0℃to 55℃

Operating Humidity 5 to 95% RH)

Dimensions (LxWxH) 100x60x29mm (ID-SC0511-S1/ID-SC0611-S1)

195x80x38mm (ID-SC0711-S1/ID-SC0811-S1)

Regulatory Approvals FCC/CE

* Specification is subject to change without notice

USB to 1-port RS-232 Hub

Hardware Dimension

100mm

Hardware Introduction

USB to 2-port RS-232 Hub

Hardware Dimension

Hardware Introduction

USB to 4-port RS-232 Hub

Hardware Dimension

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SIIG Changer

SIIG

SIIG CE-KV0011-S2 Manuel utilisateur

SIIG

SIIG JU-H70411-S2 Manuel utilisateur

SIIG

SIIG FireWire Manuel utilisateur

SIIG

SIIG SuperSpeed USB 4-Port Hub Manuel utilisateur

SIIG

SIIG USB 2.0 SlimHub 4000P Manuel utilisateur

SIIG

SIIG PC Switch 6000 Manuel utilisateur

SIIG

SIIG CE-KV0011-S1 Manuel utilisateur

SIIG

SIIG ID-US0411-S1 Manuel utilisateur

SIIG

SIIG JU-SC0111-S1 Manuel utilisateur

SIIG

SIIG AV-GM09S3-S1 Manuel utilisateur

SIIG

SIIG USB Over IP Manuel utilisateur

SIIG

SIIG JU-SW2212-S1 Manuel utilisateur

SIIG

SIIG SlimHub 4000P Manuel utilisateur

SIIG

SIIG AV-GM04P3-S1-W Manuel utilisateur

SIIG

SIIG JU-SC0211-S1 Manuel utilisateur

SIIG

SIIG CE-H23012-S1 Fiche d'information produit

SIIG

SIIG DisplayPort 2-Port KVM Switch Manuel utilisateur

SIIG

SIIG AV-GM04P3-S1 Manuel utilisateur

SIIG

SIIG AV-GM09Q3-S1 Manuel utilisateur

SIIG

SIIG USB 3.0 Manuel utilisateur

SIIG

SIIG CE-H24H11-S1 Manuel utilisateur

SIIG

SIIG USB 3.0 Manuel utilisateur

SIIG

SIIG CE-CM0011-S1 Manuel utilisateur

SIIG

SIIG USB 2.0+1394 6-Port Bay Hub Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur