SignWarehouse.com enduraCUT 2 Manuel utilisateur
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
1
User Manual
https://www.signwarehouse.com/blog-support/
NOTICE
SignWarehouse Inc. reserves the right to modify the information contained in this
user manual at any time without prior notice; un-authorized modification, copying
distribution or display is prohibited. All comments, queries or
suggestions concerning this manual please consult with your local dealer.
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
2
PRECAUTIONS IN USE
•For safety concern, please always hold the cutter firmly from the bottom when moving it.
Do not move the cutter by clasping the depression area on both sides.
• Do not shake or drop the blade holder,
a blade tip maybe fly out.
• During operation, keep away from any
moving parts of the cutter (such as the
carriage, drums). Also be careful that your
clothing and hair do not get caught.
• Always connect the power cable to a
grounded outlet.
• Always use the accessory power cable
provided. Make sure the power cable
isn’t crimped or caught between objects.
• Do not connect the power cable to
branching outlet to which other machines
are also connected, or use an extension
cable. There is danger of overheating and of misoperation of the machine.
• Keep the tools away from children where they can reach.
• Always put the pinch rollers within position of the white marks.
IMPORTANT INFORMATION
Thank you for your purchase of Vinyl Express EnduraCUT2 Cutting Plotter.
For your safety and to optimize the performance of the EnduraCUT 2, please read the user
manual completely and keep it in a correct location.
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
3
Contents
1. General Information Page
1.1 Introduction 5
1.2 Package Items 5
1.3 Product Features 6
1.4 Appearance of EnduraCUT 2 6
1.4.1 Front View of EnduraCUT 2 6
1.4.2 Rear View of EnduraCUT 2 7
1.4.3 The Left-hand Side of EnduraCUT 2 7
1.4.4 The Right-hand Side of EnduraCUT 2 7
2. Installation
2.1 Precautions and Notices 8
2.2 Desktop Roller Brackets 9 10
2.3 Blade Installation 11 - 13
2.4 Cable Connections 14
2.5.1 USB Driver Installation 14 - 15
2.6 LXI Software Installation 15 - 18
2.7 USB Driver Un-installation 20
2.8.1 Serial RS-232 Communication 20
2.8.2 Data Transmitting
3. The Control Panel
3.1 The LCD Panel Functions 21
3.2 Menu in On-line Mode 22
3.3 Menu in Off-line Mode 23 - 24
3.4 Menu Items 25 - 29
Continued on page 4...
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
4
Contents Cont’d
4. Operation
4.1 Media Loading 30
4.1.1 Loading the Sheet Media 30 - 31
4.2 Loading the Roll Media 32 - 33
4.3 Optimizing Tracking 33
4.4 Cutting Force and Offset Adjustment 34 - 35
4.4 When Completing the Cutting Job 35
5. Maintenance
5.1 Cleaning the cutting Plotter 36
5.2 Cleaning the Grit Rollers 36
5.3 Cleaning the Pinch Rollers 37
6. Trouble Shooting
6.1 Non-Operational Problems 38
6.2 Operational Problems 39
6.3 Cutting Plotter - PC Communication Problems 40
6.4 Software Problems 41
6.5 Cutting Quality Problems 42
7. Plotter and Blade Specifications
7-1 Specifications of EnduraCUT 2 43
7-2 Plotter Blade Primer 44
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
5
Chapter 1: General Information
1.1 Introduction
EnduraCUT 2 cutting plotters have been designed to produce computer-generated images
on sheets or rolls of vinyl media.
This manual covers the Vinyl Express EnduraCUT 2 series cutting plotter:
acceptable media widths range from 2.76”(70mm) ~ 28.3”(719mm)
1.2 Package Items
The EnduraCUT 2 is shipped with the items listed below. Please check your package careful-
ly. If you find any item missing, please consult SignWarehouse customer service for further
assistance.
Standard Item Quantity
1. Cutting Plotter 1
2. Stand Set ( Optional )
• 1 Left side vertical stand
• 1 Right side vertical stand
• 1 Support for left side
• 1 Support for right side
• 1 Stand Beam
• 2 Bottom Stands with wheels
• 2 Sliding brackets for paper takeup
• 1 Hex Wrench (M5) 4
• 28 Socket flat head screws(M6*12L)
• 1 Installation Guide
1
3. Accessories
• 1 AC power Cord
• 1 USB Printer cable
• 1 Serial cable
• 1 Blade Holder Assembly (Installed in tool carriage of the cutting plotter )
• 1 Blade (Installed in Blade Holder)
• 1 Safety Blade
• 1 Cutting Pad
• 1 Pair of Tweezers
• 1 Roller Tray
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
6
1.3 Product Features
The following are the main features of the EnduraCUT 2 cutting plotter:
• Dual-port connectivity provides you with greater flexibility.
• Up to 400-gram cutting force.
• Up to 600mm/per second cutting speed.
• Guaranteed 16ft tracking.
• User-friendly, multi-language control panel
1.4 Product Appearance
The following are the main features of the EnduraCUT 2 cutting plotter:
1.4.1 Front View
Control Panel
14 buttons and 1 LED and 1 LCM
showing messages and menus.
Grid Drums
move the media back and forth
during operation.
Slicer Groove
cuts off the extra media easily
along this groove Tool Carriage
performs the cutting with
the blade or pen.
Platen
provides the surface for
supporting media while
cutting.
Alignment Rulers
media can be aligned with
the clear guide line marks.
Cutting Pad
provides the protection of
blade when the blade is
cutting.
Fig 1-1
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
7
1.4.2 The Rear View (Figure 1-2)
1.4.3 The Left-Side View (Figure 1-3) 1.4.4 Right-Side View (Figure 1-4)
Lever
raises or lowers the
pinch rollers.
Fuse -3Amp.
Power Switch -On
when switches to [I]; Off
to [O]. Serial Interface Connector (RS232C)
Used to connect the cutting plotter to a computer
through a serial interface cable.
USB Connector
Used to connect the cutting plotter to a
computer through a USB cable.
AC Power Connector
Pinch Rollers
Holds the media during cutting
Fig 1-2
Fig 1-3 Fig 1-4
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
8
Chapter 2: Installation
2.1 Precautions
Notice 1
• Carefully handle the cutter to prevent any injuries.
• Make sure the power switch is off before installing the cutting plotter.
Notice 2 A proper place for installation the cutting plotter
Please select a proper location that meets the following conditions:
• The machine can be approached easily from any direction.
• Keep at least 2feet (60 cm) of clear space in front and behind the machine.
• Make sure the cutter is placed on a flat, level and sturdy surface
• The operation temperature should be between 60° and 86°F (15° to 30°C) in the workshop.
• The relative humidity of the working environment should be between 25% to 75%.
• Protect the machine from dust and air current.
• Prevent the machine from direct sunlight.
Notice 3 Connecting the Power Supply
Check the plug of the power cord to see if it matches the wall outlet. If not, please contact your dealer.
• Insert the plug (male) into a grounded power outlet.
• Insert the other end (female) of power cord into the AC connector of cutting plotter.
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
9
2.2 Desktop Roller Brackets
Step 1
Check three spacer supports on the back of the machine.
Step 2
Insert the left and right roll holder base into the spacer supports
on the left and right side when 2 inches roll media is used.
Figure 2-2
Figure 2-1
User Manual
2614 Texoma Drive Denison, TX 75020 • 980 Contract St. Suite 110 Lexington, KY
Phone: 903-462-7700 or toll free 800-899-5655 • Fax: 800-966-6834
10
Step 3
Press the roll holder base and the installation is complete.
Note: Insert the left roll holder base into the middle spacer support
and right roll holder base into the right one when 1 inches roll
media is used.
Figure 2-3
Figure 2-4
Table des matières
Autres manuels SignWarehouse.com Coupeur
