Siemens EUROSET 805S Manuel utilisateur

ΤΗΛΕΦΩΝΙΚΗ ΣΥΣΚΕΥΗ SIEMENS 805 S

•Overview of Euroset 805 S

•Installation

•Setting dialing method

•Setting the volume of tone ringing

•Last number Redial

•Saved number redial

•Speed dialing

•Repertory keys

•Mute

•Recall key

•Configuration of telephone socket

Overview of Euroset 805 S

Installation

Spiral handset cord

Insert connector (at long straight end) into socket marked until it is heard

to engage. Attach short end to handset.

Connecting cord

Insert the one connector into socket on lower side, and insert the other

connector into wall socket. Secure connecting cord in cable guide provided.

The signaling method of your telephone must be set to MF tone dialing or loop

disconnect (LD) dialing (depending on the dialing method of the

telecommunication station) before you put your telephone into operation. When

delivered, your telephone is set for MF tone dialing.

Check: Dial any digit. If you hear the dial tone, you must change over to the

other dialing method.

Setting dialing method

The signaling method of your telephone must be set to MF tone dialing or loop

disconnect (LD) dialing (depending on the dialing method of the

telecommunication station) before you put your telephone into operation. When

delivered, your telephone is set for MF tone dialing.

Check: Dial any digit. If you hear the dial tone, you must change over to the

other dialing method.

Set

Pushbutton on base of telephone

T for MF / time break recall (TBR)

P for LD / earth loop recall (ELR)

Temporary changeover with

-only if tone/pulse switch is set to "P" -

Once a connection has been set up, you can switch to MF tone dialing by pressing

(e.g. to operate an answering machine).

The telephone automatically reverts to dial pulsing once the connection has been

cleared down.

Setting the volume of tone ringing

Pushbutton on base of telephone:

There are three optional levels:

1 = min. vol.

2 = normal vol.

3 = max. vol.

Last number redial

You can redial the last number dialed by lifting the handset and pressing the

REDIAL key .

The memory is cleared if the number entered contains

more than 32 digits.

Saved number redial

Storing

The number dialed can be stored while a call is in progress by pressing the

MEMO key M. This number is remains stored even if other calls are

subsequently made.

Dialing

Lift the handset and press M.

A number remains stored until a new number is stored with

the MEMO key M.

Speed dialing

You can store up to 10 frequently required numbers as speed dialing destinations

(max. 16 digits each) can be stored on digit keys.

Storing numbers

Lift the handset and press the SET key . Enter the number and press the

SET key again. Enter the required speed dialing number (between 0 and

9). Replace the handset.

If you are in the middle of a call, you can store the number just dialed by pressing

the SET key twice and entering the speed dialing number on which the

number is to be stored.

Dialing speed dialing numbers

Lift the handset and press the speed dialing key/MEM . Enter the speed

dialing destination between 0 and 9.

•A dialed number is not stored if it contains more than

15 digits.

•You can delete the number assigned to a specific

key by overwriting it.

•Dial pauses (approx. 3.6 seconds - not in first

position) can be inserted by pressing the key.

These pauses are included in the speed

dialing/name keys and redial memory and are

required in the case of certain PABXs (e.g. 0

2368).

•The keys and are stored regardless of

the dial type, but can only be selected in the case of

DTMP signaling.

Repertory keys

Three repertory keys are available for up to 32 digits each.

Storing

Lift the handset and press the SET key . Dial the number and press the

SET key again. Press one of the 3 repertory keys . The number is now

stored on this repertory key. Replace the handset.

Storing during a call

Press the SET key twice followed by the repertory key on which the

number is to be stored.

Repertory dialing

Lift the handset and press the repertory key . The number stored on this key

is immediately dialed. Please see note under " Speed dialing ".

Mute

You can deactivate the handset completely by pressing the MUTE key

while a call is in progress. The other party can no longer hear you. To activate

the handset, simply press the key once more.

RECALL key

Use the RECALL key to use additional PABX features, if applicable.

Configuration of telephone socket

Configuration of the socket for the connecting cord on the lower side of the

telephone set:

Autres manuels pour EUROSET 805S

Table des matières

Autres manuels Siemens Téléphone

Siemens

Siemens CF62 Guide de configuration

Siemens

Siemens Gigaset DX800A all in one Manuel utilisateur

Siemens

Siemens Gigaset 4215 Manuel utilisateur

Siemens

Siemens Gigaset A100 Manuel utilisateur

Siemens

Siemens Gigaset SX255isdn Manuel utilisateur

Siemens

Siemens OpenStage 5 Manuel utilisateur

Siemens

Siemens Gigaset SL370 Manuel utilisateur

Siemens

Siemens optiPoint 410 S Manuel

Siemens

Siemens 2000C pocket Manuel utilisateur

Siemens

Siemens HiPath 1100 Series Manuel du propriétaire

Siemens

Siemens HiPath 3000 V3.0 or later Gigaset M1... Manuel utilisateur

Siemens

Siemens GIGASET AL140 TRIO Manuel utilisateur

Siemens

Siemens HiPath 3000 V3.0 or later Gigaset M1... Manuel utilisateur

Siemens

Siemens OpenStage Asterisk Manuel du produit

Siemens

Siemens OpenScape Voice OpenStage 20 E SIP Manuel utilisateur

Siemens

Siemens HiPath 3000 V3.0 or later Gigaset M1... Manuel utilisateur

Siemens

Siemens Optiset E Entry Manuel utilisateur

Siemens

Siemens Gigaset C350 Mode d'emploi

Siemens

Siemens OpenStage 30 T Manuel utilisateur

Siemens

Siemens Hicom 300 optiset E Standard Manuel utilisateur

Siemens

Siemens Gigaset 2420 Manuel utilisateur

Siemens

Siemens HiPath 1120 Manuel utilisateur

Siemens

Siemens GIGASET AL145 TRIO Manuel utilisateur

Siemens

Siemens Gigaset 8825 Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur