Siemens SpeedStream 2105 Manuel utilisateur

SpeedStream® 2105

5-Port 10/100 Ethernet Switch

Quick-Start Guide

007-2105-001

Your SpeedStream®2105’s rear panel has five standard J-45 ports, plus a shared Uplink port. Each port

automatically detects the speed and duplex of the attached cabling to a network card, switch, hub, etc.

The ports operate in either full or half duplex mode.

Each port on your SpeedStream®2105 can connect to workstations, file servers, hubs, repeaters, bridges,

routers, or other switches. Connections to the 2105 require Category 5 UTP network cabling with J-45

connectors, not to exceed 328 ft (100 meters) in length.

Front Panel of 5-port Ethernet Switch ear Panel of 5-port Ethernet Switch

Cabling Guidelines

Use Category 5 UTP cabling with four pair of wires and J-45 connectors for all 100 Mbps connections.

Use the chart below to position your switches, hubs, and workstations.

F OM TO MAXIMUM DISTANCE

Switch Switch or Hub 328 ft (100 meters)

Switch or Hub Workstation 328 ft (100 meters)

LED Indicators

LED indicators are provided for monitoring various network conditions. A glance at the front panel

allows you to instantly monitor the status of each station port plus the overall condition of the switch.

LED LED STATUS INDICATION

PWR On Power indicator

FDX/COL On Full duplex transfer mode

Flashing Port has detected data collision error

Off Half duplex transfer mode

LINK/ACT

Yellow On 100 Mbps connection is detected

Flashing Data is sending/receiving at 100 Mbps

Green On 10 Mbps connection is detected

Flashing Data is sending/receiving at 10 Mbps

Step 2Hardware Description/Troubleshooting

45321

Link/ACT

COL/FDX

Yellow 100M

Green 10M

Power

12VDC 0.5A Uplink21345

For more information regarding SpeedStream® products visit: www.speedstream.com.

Efficient Networks, Inc.

A Siemens Company

4849 Alpha oad

Dallas, TX 75244

tered trademarks of Efficient Networks, Inc. Siemens and the Siemens logo are registered trademarks of Siemens AG, Germany. All other brand

names and trademarks are held by their respective companies. Efficient Networks reserves the right to make changes to product specifications at

any time without notice.

Technical Support for North America is available 24 hours a day, 7 days a week, by phone, email or online:

Phone: 1-877-823-6722

Email: [email protected]

Online: http://www.support.speedstream.com

AC Power Adapter Extended Warranty and

Registration Card

Package Contents

Your package includes the following:

Before you begin: Step 1Hardware Installation

. Select an appropriate location.

2. Connect your workstation to any available RJ-45 port on the switch using twisted-

pair cable.

All end-node devices must be within 328 ft (100 meters) of the connected hub.

Using the hub in a stand-alone configuration you can network up to 5 workstations.

To connect a computer directly to the switch plug one end of the cable into the

switch then plug the other end of the cable into the computer’s network adapter.

3 Plug in the AC power adapter.

NOTE: Each time your SpeedStream® 2105 powers up, it will run a Diagnostic Self-

Test. After the test is complete, the Power LED will light up.

4. As connections to the 2 05's ports are made, each port’s corresponding

LINK/ACT will light up. The remaining LEDs will also light up according to how

your data is being transferred, e.g. full or half duplex, 0 Mbps or 00 Mbps.

5-Port 0/00Mbps

Fast Ethernet Switch

COL/FDX

POWER

LINK/ACT

Yellow 00M

Green 0M

2VDC 0.5A5432Uplink

RJ-45

Power

SpeedStream® 2 05 Ł

Ethernet Switch Ł

(5-port 0/ 00Base-T)

Safety and Certifications

Uplinking to other Switches and Hubs

NOTE: Using the Uplink port will automatically disable the port directly next to it

since the Uplink port is a shared port.

SpeedStream

Quick-Start Guide

5-Port Ethernet switch

10Mbps

Ethernet Switch Safety and Quick Start Guide

(5-port 0/ 00Base-T) Certifications

Information

JUST GO TO

www.speedstream.com/reg/extwrnty

GETAONEYEARHARDWAREWARRANTYEXTENSION

ONYOURSPEEDSTREAMPRODUCT.

GETA ONEYEARHARDWAREWARRANTYEXTENSION

ONYOURSPEEDSTREAMPRODUCT.

EXTENDED WARRANTY!

Keep this

near your PC to know where

to go for support, DSL education,

and new product info.

www.speedstream.com

Live a Broadband Life™

007-0105-002

This offer may be revoked, amended, supplemented, revised, altered, changed or terminated at any time without notice in the sole and absolute

discretion of Efficient Networks, Inc. This offer is available on select products only. This offer is available in select countries only. The offer is

good for thirty (30) days from the date of installation. Offer void where prohibited by law. Certain restrictions may apply.

' 2001 Efficient Networks, Inc. ASiemens Company

F EE

AC Power Adapter Extended Warranty and

Registration Card

Package Contents

Your package includes the following:

Before you begin: Step 1Hardware Installation

. Select an appropriate location.

2. Connect your workstation to any available RJ-45 port on the switch using twisted-

pair cable.

All end-node devices must be within 328 ft (100 meters) of the connected hub.

Using the hub in a stand-alone configuration you can network up to 5 workstations.

To connect a computer directly to the switch plug one end of the cable into the

switch then plug the other end of the cable into the computer’s network adapter.

3 Plug in the AC power adapter.

NOTE: Each time your SpeedStream® 2105 powers up, it will run a Diagnostic Self-

Test. After the test is complete, the Power LED will light up.

4. As connections to the 2 05's ports are made, each port’s corresponding

LINK/ACT will light up. The remaining LEDs will also light up according to how

your data is being transferred, e.g. full or half duplex, 0 Mbps or 00 Mbps.

5-Port 0/00Mbps

Fast Ethernet Switch

COL/FDX

POWER

LINK/ACT

Yellow 00M

Green 0M

2VDC 0.5A5432Uplink

RJ-45

Power

SpeedStream® 2 05 Ł

Ethernet Switch Ł

(5-port 0/ 00Base-T)

Safety and Certifications

Uplinking to other Switches and Hubs

NOTE: Using the Uplink port will automatically disable the port directly next to it

since the Uplink port is a shared port.

SpeedStream

Quick-Start Guide

5-Port Ethernet switch

10Mbps

Ethernet Switch Safety and Quick Start Guide

(5-port 0/ 00Base-T) Certifications

Information

JUST GO TO

www.speedstream.com/reg/extwrnty

GETAONEYEARHARDWAREWARRANTYEXTENSION

ONYOURSPEEDSTREAMPRODUCT.

GETA ONEYEARHARDWAREWARRANTYEXTENSION

ONYOURSPEEDSTREAMPRODUCT.

EXTENDED WARRANTY!

Keep this

near your PC to know where

to go for support, DSL education,

and new product info.

www.speedstream.com

Live a Broadband Life™

007-0105-002

This offer may be revoked, amended, supplemented, revised, altered, changed or terminated at any time without notice in the sole and absolute

discretion of Efficient Networks, Inc. This offer is available on select products only. This offer is available in select countries only. The offer is

good for thirty (30) days from the date of installation. Offer void where prohibited by law. Certain restrictions may apply.

' 2001 Efficient Networks, Inc. ASiemens Company

F EE

SpeedStream® 2105

5-Port 10/100 Ethernet Switch

Quick-Start Guide

007-2105-001

Your SpeedStream®2105’s rear panel has five standard J-45 ports, plus a shared Uplink port. Each port

automatically detects the speed and duplex of the attached cabling to a network card, switch, hub, etc.

The ports operate in either full or half duplex mode.

Each port on your SpeedStream®2105 can connect to workstations, file servers, hubs, repeaters, bridges,

routers, or other switches. Connections to the 2105 require Category 5 UTP network cabling with J-45

connectors, not to exceed 328 ft (100 meters) in length.

Front Panel of 5-port Ethernet Switch ear Panel of 5-port Ethernet Switch

Cabling Guidelines

Use Category 5 UTP cabling with four pair of wires and J-45 connectors for all 100 Mbps connections.

Use the chart below to position your switches, hubs, and workstations.

F OM TO MAXIMUM DISTANCE

Switch Switch or Hub 328 ft (100 meters)

Switch or Hub Workstation 328 ft (100 meters)

LED Indicators

LED indicators are provided for monitoring various network conditions. A glance at the front panel

allows you to instantly monitor the status of each station port plus the overall condition of the switch.

LED LED STATUS INDICATION

PWR On Power indicator

FDX/COL On Full duplex transfer mode

Flashing Port has detected data collision error

Off Half duplex transfer mode

LINK/ACT

Yellow On 100 Mbps connection is detected

Flashing Data is sending/receiving at 100 Mbps

Green On 10 Mbps connection is detected

Flashing Data is sending/receiving at 10 Mbps

Step 2Hardware Description/Troubleshooting

45321

Link/ACT

COL/FDX

Yellow 100M

Green 10M

Power

12VDC 0.5A Uplink21345

For more information regarding SpeedStream® products visit: www.speedstream.com.

Efficient Networks, Inc.

A Siemens Company

4849 Alpha oad

Dallas, TX 75244

tered trademarks of Efficient Networks, Inc. Siemens and the Siemens logo are registered trademarks of Siemens AG, Germany. All other brand

names and trademarks are held by their respective companies. Efficient Networks reserves the right to make changes to product specifications at

any time without notice.

Technical Support for North America is available 24 hours a day, 7 days a week, by phone, email or online:

Phone: 1-877-823-6722

Email: [email protected]

Online: http://www.support.speedstream.com

Table des matières

Autres manuels Siemens Routeur réseau

Siemens

Siemens PXG3 Series Manuel utilisateur

Siemens

Siemens SINAUT MD741-1 Guide de l'utilisateur

Siemens

Siemens ADSL C-110 Manuel utilisateur

Siemens

Siemens SCALANCE XR-100WG Series Manuel utilisateur

Siemens

Siemens C2-010 Manuel utilisateur

Siemens

Siemens Santis ADSL 50 Manuel utilisateur

Siemens

Siemens SIMATIC NET RUGGEDCOM RS920W Manuel utilisateur

Siemens

Siemens SCALANCE X-400 Guide de l'administrateur

Siemens

Siemens RUGGEDCOM RX1500 Manuel utilisateur

Siemens

Siemens SIMATIC NET SCALANCE XR-300M EEC Series Guide de l'administrateur

Siemens

Siemens RUGGEDCOM RS416 Manuel utilisateur

Siemens

Siemens se5880 Manuel utilisateur

Siemens

Siemens SpeedStream 5450 Manuel utilisateur

Siemens

Siemens PSFR-CP41 Comment utiliser

Siemens

Siemens Gigaset Optical LAN Adapter Duo Manuel utilisateur

Siemens

Siemens CL-110 Manuel utilisateur

Siemens

Siemens RUGGEDCOM ROX II Manuel utilisateur

Siemens

Siemens RUGGEDCOM M969 Manuel utilisateur

Siemens

Siemens SCALANCE M800 Manuel utilisateur

Siemens

Siemens SCALANCE S615 Feuille d'instructions

Siemens

Siemens RUGGEDCOM RS1600 Manuel utilisateur

Siemens

Siemens Gigaset SX541 WLAN dsl Manuel utilisateur

Siemens

Siemens GIGASET SX762 WLAN DSL Manuel utilisateur

Siemens

Siemens RUGGEDCOM RX1100 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité