Siemens SINAMICS G180 Manuel utilisateur

___________________

SINAMICS

SINAMICS G180

Display messages

Software Version 11C0242/CR88

05/2020

4BS0576F

-004

Introduction

Safety instructions

List of messages

Assignment of the message

groups for the bit generators

Service & Support

List of abbreviations

Siemens AG

Digital Industries

P.O. Box 48 48

90026 NÜRNBERG

GERMANY

4BS0576F-004

Ⓟ

05/2020 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Display messages

05/2020, 4BS0576F-004 3

Table of contents

1 Introduction................................................................................................................................................ 5

2 Safety instructions ..................................................................................................................................... 7

2.1 Security information ..................................................................................................................7

3 List of messages........................................................................................................................................ 9

4 Assignment of the message groups for the bit generators....................................................................... 43

A Service & Support.................................................................................................................................... 55

B List of abbreviations................................................................................................................................. 57

Index........................................................................................................................................................ 59

Table of contents

Display messages

405/2020, 4BS0576F-004

Display messages

05/2020, 4BS0576F-004 5

Introduction

This document is valid for SINAMICS® G180, from software version 11C0242/CR88 and

higher.

1. Check the current software version on the inverter display in the menu

"I INVERTER DATA/I device data/Version".

2. If the inverter software is higher than the version of the operating manual, download the

current version from www.siemens.com.

Contact the Service Department of the manufacturer for more detailed information.

Introduction

Display messages

605/2020, 4BS0576F-004

Display messages

05/2020, 4BS0576F-004 7

Safety instructions

WARNING

Undesirable machine response

The machine can respond undesirably as a result of incorrect or modified parameterization.

This can result in death, serious injury or material damage.

•Protect the parameterization (parameter assignments) against unauthorized access.

•Read and carefully follow the instructions in this document and all the relevant

documents.

•If necessary, contact our Service-Center (Page 55).

2.1 Security information

Note

Industrial security

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Products and solutions from Siemens constitute one element of such a

concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the Internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. using firewalls and/or

network segmentation) are in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into

account. For more information about industrial security, please visit:

Industrial security (http://www.siemens.com/industrialsecurity).

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they

become available, and that only the latest product versions are used. Use of product

versions that are no longer supported, and failure to apply latest updates may increase

customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed at:

Industrial security (http://www.siemens.com/industrialsecurity).

Safety instructions

2.1 Security information

Display messages

805/2020, 4BS0576F-004

Autres manuels pour SINAMICS G180

Table des matières

Autres manuels Siemens Moniteur

Siemens

Siemens SIMATIC HMI series Manuel utilisateur

Siemens

Siemens 125-2134 Manuel utilisateur

Siemens

Siemens SCD 1897-M Manuel

Siemens

Siemens FT2011 Manuel utilisateur

Siemens

Siemens SITRANS RD200 Manuel utilisateur

Siemens

Siemens MCM-21T2 Manuel utilisateur

Siemens

Siemens 43B1-M Manuel utilisateur

Siemens

Siemens INOX PRO SIMATIC IFP1900 Manuel utilisateur

Siemens

Siemens SIMATIC S7-200 Guide de l'utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

Siemens

Siemens 30 64 581 B5310 Instructions d'utilisation et d'entretien

Siemens

Siemens MCM 17P1 Manuel utilisateur

Siemens

Siemens SIRIUS 3RK3 Manuel utilisateur

Siemens

Siemens SCD 1597-I Manuel utilisateur

Siemens

Siemens SIMATIC HMI IRD400 Manuel utilisateur

Siemens

Siemens SIMOMED HM Mode d'emploi

Siemens

Siemens SCD 1597-E Manuel utilisateur

Siemens

Siemens FT2014 Manuel utilisateur

Siemens

Siemens SYSCON1 Manuel utilisateur

Siemens

Siemens SCD 1297 Series Manuel utilisateur

Siemens

Siemens DSP800 Manuel utilisateur

Siemens

Siemens SITRANS RD200 Manuel utilisateur

Siemens

Siemens 19T2 Manuel utilisateur

Siemens

Siemens SCD 1898-I Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation