Siemens SINAMICS S120 Document technique

Equipment Manual 04/2004 Edition

SINAMICS S120

Booksize Power Sections

Preface

System Overview

Line Connection Booksize

Line Modules Booksize

Motor Modules Booksize

DC Link Components

Booksize

Cabinet Configuration and

EMC Booksize

Service and Support

Booksize

Appendix A

Appendix B

SINAMICS

SINAMICS S120

Booksize Power Sections

Equipment Manual

(GH2), 04.2004 Edition

SINAMICS® Documentation

Printing history

Brief details of this edition and previous editions are listed below.

The status of each edition is shown by the code in the "Remarks" column.

Status code in the "Remarks" column:

A New documentation

B Unrevised reprint with new order no.

C Revised edition with new status

If factual changes have been made on the page in relation to the same software version, this is indicated by a new edition

coding in the header on that page.

Edition Order No. Remarks

04.04 6SL3097-2AC00-0BP0 A

Trademarks

SIMOVERT®, SIMATIC®, SIMATIC HMI®, SIMATIC NET®, SIMOTION®, SINUMERIK® and SINAMICS® are trademarks of

Siemens. Other product names used in this documentation may be trademarks which, if used by third parties, could infringe the

rights of their owners.

Further information is available on the Internet under:

http://www.siemens.com/motioncontrol

This publication was produced with SIPS+

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including those created by patent grant or registration of a

utility model or design, are reserved.

We have checked that the contents of this document correspond to the hardware

and software described. Nonetheless, differences might exist and therefore we

cannot guarantee that they are completely identical. The information contained in

this document is, however, reviewed regularly and any necessary changes will

be included in the next edition. We welcome suggestions for improvement.

Subject to changes without prior notice

Order No. 6SL3097-2AC00-0BP0

Printed in Germany

Siemens Aktiengesellschaft

Booksize Power Sections

Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0 iii

Preface

Information on the SINAMICS S documentation

The SINAMICS S documentation is divided into the following areas:

• General documentation/catalogs

• Manufacturer/service documentation

• Electronic documentation

This documentation is an integral part of the manufacturer/service documentation developed

for SINAMICS. All documents can be obtained separately.

You can obtain detailed information about the documents named in the documentation

overview and other documents available for SINAMICS from your local Siemens office.

For the sake of simplicity, this documentation does not contain all detailed information about

all types of the product and cannot cover every conceivable case of installation, operation, or

maintenance.

The contents of this documentation are not part of an earlier or existing agreement, a

promise, or a legal agreement, nor do they change this. All obligations entered into by

Siemens result from the respective contract of sale that contains the complete and sole valid

warranty arrangements. These contractual warranty provisions are neither extended nor

curbed as a result of the statements made in this documentation.

Audience

This documentation is aimed at machine and plant builders, commissioning engineers, and

service personnel who use SINAMICS.

Objective

This manual describes the hardware components of the SINAMICS S system. It provides

information about installation, electrical connection, and cabinet design.

Preface

Booksize Power Sections

iv Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0

Danger and warning notices – symbol explanations

The following danger and warning notices are used in this document:

Danger

Indicates an imminently hazardous situation which, if not avoided, will result in death, serious

injury, or substantial damage to property.

Warning

Indicates an potentially hazardous situation which, if not avoided, could result in death, or

serious injury, or substantial property damage.

Caution

Used with the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or property damage.

Caution

Used without safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Notice

Used without the safety alert symbol indicates a potential situation which, if not avoided, may

result in an undesirable result or state.

Note

This notice indicates that there are further issues to be taken into consideration.

Preface

Booksize Power Sections

Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0 v

Definition: Qualified personnel

With reference to this manual and the warning labels on the product, a "qualified person" is

someone who is familiar with the installation, mounting, startup, and operation of the

equipment and who has certified qualifications for the type of responsibility involved, such

as:

• Training and instruction, i.e. authority to switch on and off, to earth and to label circuits

and equipment according to safety regulations.

• Training and instruction in maintenance and use of adequate safety equipment according

to safety regulations.

• First aid training.

Finding information

To help you find information more easily, the following sections have been included in the

appendix in addition to the table of contents:

1. References

2. Index

Preface

Booksize Power Sections

vi Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0

Technical information

Hotline

If you have any further questions, please call our hotline:

A&D Technical Support

Tel.: +49 (0) 180 5050 - 222

Fax: +49 (0) 180 5050 - 223

E-mail: [email protected]

Please send any questions about the documentation (suggestions for improvement,

corrections, and so on) to the following fax number or e-mail address:

Fax: +49 (0) 9131 98 - 2176

Fax form: See feedback page at the end of this publication

Email: [email protected]

Internet address

Up-to-date information about our products can be found on the Internet at the following

address:

http://www.siemens.com/motioncontrol

Autres manuels pour SINAMICS S120

Table des matières

Autres manuels Siemens Électricité industrielle

Siemens

Siemens SIRIUS S00 Manuel utilisateur

Siemens

Siemens RAJA+ 3TE7421 Mode d’emploi

Siemens

Siemens BD01 Series Manuel utilisateur

Siemens

Siemens 3VA1 Series Manuel utilisateur

Siemens

Siemens SIRIUS 3RA2933-2BB1 Manuel utilisateur

Siemens

Siemens SIVACON 8PS LD Manuel utilisateur

Siemens

Siemens 7XR61 Series Manuel

Siemens

Siemens SITOP power DC-UPS Module 15 Manuel utilisateur

Siemens

Siemens 3VT9200-3MJ00 Manuel utilisateur

Siemens

Siemens BD 2-F Series Manuel utilisateur

Siemens

Siemens 3WX31 46-7C1 3 Series Manuel utilisateur

Siemens

Siemens ASC9.8 Mode d’emploi

Siemens

Siemens SWT-3000 Document technique

Siemens

Siemens SIMOVERT MASTERDRIVE SIMOLINK-Board Manuel utilisateur

Siemens

Siemens MICROMASTER 440 Instructions d'utilisation et d'entretien

Siemens

Siemens 7XT34 Series Manuel

Siemens

Siemens 3VL9300-3TN00 Manuel utilisateur

Siemens

Siemens 3TS33 Manuel utilisateur

Siemens

Siemens 3VA9588-0VM10 Manuel utilisateur

Siemens

Siemens SIRIUS 3TF68 Series Manuel utilisateur

Siemens

Siemens 3VA921-0JC22 Series Manuel utilisateur

Siemens

Siemens RHVE6 Manuel utilisateur

Siemens

Siemens IP Viewer N151 Manuel de service

Siemens

Siemens MICROMASTER 430 Instructions d'utilisation et d'entretien

Manuels Électricité industrielle populaires d'autres marques

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Manuel technique

Abtech

Abtech HVJB Series Mode d’emploi

Murata

Murata GRM0335C1H8R1DA01 Series Manuel utilisateur

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Manuel utilisateur

Eaton

Eaton Ulusoy HMH24-04 Manuel utilisateur

Newlong

Newlong NP-7H Manuel utilisateur

Murata

Murata GJM0335C1E4R4BB01 Series Manuel utilisateur

Stahl

Stahl 8575/12 Manuel utilisateur

SI Pegasus Manuel utilisateur

Murata

Murata GRM1555C1H2R7CA01 Seies Manuel utilisateur

Murata

Murata GRM0225C1E6R4BA03 Series Manuel utilisateur

Cooper Power Systems

Cooper Power Systems VXE15 Manuel utilisateur

S&C

S&C Vista SD Manuel utilisateur

Murata

Murata GRM0335C2A7R3CA01 Series Manuel utilisateur

Murata

Murata GRM32ER60G227ME05 Series Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley MP-Series Manuel utilisateur

Phasemation

Phasemation DG-100 Manuel utilisateur

Murata

Murata GRM219R61C225KA88 Series Manuel utilisateur