Siemens SIMATIC ET 200SP Manuel utilisateur

SIMATIC

ET 200SP/ET 200AL

Mixed configuration

Equipment Manual

11/2020

A5E33344611

-AD

Preface

Documentation guide

Product overview

Application planning

Mounting

Connecting

Configuring

Technical specifications

Siemens AG

Digital Indus

tries

Postfach 48 48

90026 NÜ

RNBERG

GERMANY

Ⓟ

12/2020 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Mixed configuration

Equipment Manual, 11/2020, A5E33344611-AD 3

Table of contents

1 Preface ................................................................................................................................................... 4

2 Documentation guide............................................................................................................................ 6

3 Product overview................................................................................................................................. 11

3.1 BaseUnit BU-Send .............................................................................................................. 11

3.1.1 Product overview............................................................................................................... 11

3.2 BusAdapter BA-Send 1xFC.................................................................................................. 13

3.2.1 Properties.......................................................................................................................... 13

3.2.2 Wiring and schematic circuit diagram................................................................................. 15

3.2.3 Diagnostics by means of LED display .................................................................................. 16

4 Application planning ........................................................................................................................... 17

5 Mounting ............................................................................................................................................. 21

6 Connecting .......................................................................................................................................... 22

6.1 Connecting BaseUnit BU-Send............................................................................................ 22

7 Configuring.......................................................................................................................................... 27

8 Technical specifications....................................................................................................................... 30

8.1 Technical specifications BaseUnit BU-Send ......................................................................... 30

8.2 Technical specifications BusAdapter BA-Send 1xFC ............................................................. 31

Mixed configuration

4Equipment Manual, 11/2020, A5E33344611-AD

Preface

Purpose of the documentation

This manual supplements the system manuals ET 200SP distributed I/O system and ET 200AL

distributed I/O system.

Functions that generally relate to the system are described in these system manuals.

The information provided in this manual and in the system/function manuals supports you in

commissioning the system.

Conventions

CPU: When the term "CPU" is used in the following, it applies to the CPUs of the S7-1500

automation system as well as to the CPUs/interface modules of the ET 200SP and ET 200AL

distributed I/O systems.

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

Also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on

the handling of th

e product and on the section of the documentation to which particular

attention should be paid.

Preface

Mixed configuration

Equipment Manual, 11/2020, A5E33344611-AD 5

Recycling and disposal

For environmentally friendly recycling and disposal of your old equipment, contact a certified

electronic waste disposal company and dispose of the equipment according to the applicable

regulations in your country.

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Mixed configuration

6Equipment Manual, 11/2020, A5E33344611-AD

Documentation guide

The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC ET 200SP distributed I/O system. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

Documentation guide

Mixed configuration

Equipment Manual, 11/2020, A5E33344611-AD 7

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

ET 200SP distributed I/O system, e.g. diagnostics, communication, Web server, motion

control and OPC UA.

You can download the documentation free of charge from the Internet

(http://w3.siemens.com/mcms/industrial-automation-systems-simatic/en/manual-

overview/tech-doc-et200/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/73021864).

Manual Collection ET 200SP

The Manual Collection contains the complete documentation on the SIMATIC ET 200SP

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/84133942).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet.

Documentation guide

Mixed configuration

8Equipment Manual, 11/2020, A5E33344611-AD

"mySupport" - CAx data

In the CAx data area of "mySupport", you can access the latest product data for your CAx or

CAe system.

You configure your own download package with a few clicks.

In doing so you can select:

•Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

•Manuals, characteristics, operating manuals, certificates

•Product master data

You can find "mySupport" - CAx data on the Internet

(http://support.industry.siemens.com/my/ww/en/CAxOnline).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated

Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

Documentation guide

Mixed configuration

Equipment Manual, 11/2020, A5E33344611-AD 9

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of

TIA Portal.

The SIMATIC Automation Tool provides a multitude of functions:

•Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs

•Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a CPU

•Transfer of the date and the programming device/PC time converted to UTC time to the

module

•Program download to CPU

•RUN/STOP mode switchover

•CPU localization by means of LED flashing

•Reading out of CPU error information

•Reading of the CPU diagnostics buffer

•Reset to factory settings

•Firmware update of the CPU and connected modules

You can find the SIMATIC Automation Tool on the Internet.

PRONETA

SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network

during commissioning. PRONETA features two core functions:

•The topology overview automatically scans the PROFINET and all connected components.

•The IO check is a fast test of the wiring and the module configuration of a plant.

You can find SIEMENS PRONETA on the Internet.

Autres manuels pour SIMATIC ET 200SP

101

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Siemens Système d'E/S

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SICAM AI Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens DQ 4x24VDC/2A HS Manuel utilisateur

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200S Manuel utilisateur

Siemens

Siemens SIMATIC ET 200S Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Guide de l'utilisateur

Siemens

Siemens SIMATIC SM 335 Manuel utilisateur

Siemens

Siemens FDCIO223 Manuel utilisateur

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens SIMATIC ET 200AL Guide de l'utilisateur

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens FDCI221 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP HA Document technique

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Manuels Système d'E/S populaires d'autres marques

WAGO

WAGO 750-344 Manuel utilisateur

Teknim

Teknim TWM-1887 Mode d’emploi

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuel utilisateur

BERGHOF

BERGHOF ECC DIO 16/16 Mode d’emploi

Advantech

Advantech PCM-27J3AU Manuel d'installation et d'exploitation

Festo

Festo CP-E08-M12-CL Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuel utilisateur

Hitachi

Hitachi HX-RIO3 Series Manuel utilisateur

NUUO

NUUO SCB-A08 Manuel utilisateur

M-system

M-system R3Y-RS8 Manuel utilisateur

jablotron

jablotron JB-110N Manuel utilisateur

Omron

Omron SYSMAC C200H Manuel utilisateur

DOLD

DOLD SAFEMASTER M Manuel utilisateur

ABB

ABB OPT-MF-001 Manuel utilisateur

Omron

Omron SYSMAC C2000H Manuel utilisateur

Helmholz

Helmholz TB20 Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD2 Manuel utilisateur

Automationdirect.com

Automationdirect.com DL305 Manuel utilisateur