Siemens Sinamics S120M Manuel utilisateur

SINAMICS S120M Distributed Drive

Technology

___________________

SINAMICS

S120

SINAMICS S120M

Distributed Drive Technology

Manual

(GH12), 12/2014

6SL3097

-4AW00-0BP3

Foreword

Fundamental safety

instructions

System overview

Adapter Module 600

S120M

DRIVE-CLiQ Extension

Hybrid Cabinet Bushing

Cabinet design and EMC

S120M

Service and maintenance

Appendix

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

Order number: 6SL3097-4AW00-0BP3

Ⓟ

01/2015 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SINAMICS S120M Distributed Drive Technology

Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3 5

Foreword

SINAMICS documentation

The SINAMICS documentation is organized in the following categories:

●General documentation/catalogs

●User documentation

●Manufacturer/service documentation

Additional information

You can find information on the following topics at the following address

(http://www.siemens.com/motioncontrol/docu):

●Ordering documentation/overview of documentation

●Additional links to download documents

●Using documentation online (find and search in manuals/information)

Please send any questions about the technical documentation (e.g. suggestions for

improvement, corrections) to the following e-mail address

(mailto:docu.motioncontrol@siemens.com).

My Documentation Manager

At the following address (http://www.siemens.com/mdm), you can find information on how to

create your own individual documentation based on Siemens' content, and adapt it for your

own machine documentation.

Training

At the following address (http://www.siemens.com/sitrain), you can find information about

SITRAIN (Siemens training on products, systems and solutions for automation and drives).

FAQs

You can find Frequently Asked Questions in the Service&Support pages under Product

Support (http://support.automation.siemens.com /).

SINAMICS

You can find information about SINAMICS at the following address

(http://www.siemens.com/sinamics).

Foreword

SINAMICS S120M Distributed Drive Technology

6Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3

Usage phases and their documents/tools (as an example)

Table 1 Usage phases and the available documents/tools

Usage phase

Document/tool

Orientation

SINAMICS S Sales Documentation

Planning/configuration •SIZER Engineering Tool

•Configuration Manuals, Motors

Deciding/ordering SINAMICS S120 catalogs

•SIMOTION, SINAMICS S120 and Motors for Production

Machines (Catalog PM 21)

•SINAMICS and Motors for Single-axis Drives (Catalog D 31)

•SINUMERIK & SINAMICS

Equipment for Machine Tools (Catalog NC 61)

•SINUMERIK 840D sl Type 1B

Equipment for Machine Tools (Catalog NC 62)

Installation/assembly

•SINAMICS S120 Equipment Manual for Control Units and

Additional System Components

•SINAMICS S120 Equipment Manual for Booksize Power

Units

•SINAMICS S120 Equipment Manual for Chassis Power Units

•SINAMICS S120 Equipment Manual for AC Drives

•SINAMICS S120M Manual Distributed Drive Technology

•SINAMICS S120 Manual Booksize C/D series

•SINAMICS HLA System Manual Hydraulic Drive

Commissioning •STARTER Commissioning Tool

•SINAMICS S120 Getting Started

•SINAMICS S120 Commissioning Manual

•SINAMICS S120 CANopen Commissioning Manual

•SINAMICS S120 Function Manual

•SINAMICS S120 Safety Integrated Function Manual

•SINAMICS S120/S150 List Manual

•SINAMICS HLA System Manual Hydraulic Drive

Usage/operation •SINAMICS S120 Commissioning Manual

•SINAMICS S120/S150 List Manual

•SINAMICS HLA System Manual Hydraulic Drive

Maintenance/servicing •SINAMICS S120 Commissioning Manual

•SINAMICS S120/S150 List Manual

References •SINAMICS S120/S150 List Manual

Foreword

SINAMICS S120M Distributed Drive Technology

Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3 7

Target group

This documentation is intended for machine manufacturers, commissioning engineers, and

service personnel who use the SINAMICS drive system.

Benefits

This manual provides all of the information, procedures and operator actions required for the

particular usage phase.

Standard scope

The scope of the functionality described in this document can differ from that of the drive

system that is actually supplied.

●Other functions not described in this documentation might be able to be executed in the

drive system. However, no claim can be made regarding the availability of these functions

when the equipment is first supplied or in the event of service.

●The documentation can also contain descriptions of functions that are not available in a

particular product version of the drive system. The functionality of the supplied drive

system should only be taken from the ordering documentation.

●Extensions or changes made by the machine manufacturer must be documented by the

machine manufacturer.

For reasons of clarity, this documentation does not contain all of the detailed information on

all of the product types, and cannot take into consideration every conceivable type of

installation, operation and service/maintenance.

Technical Support

Country-specific telephone numbers for technical support are provided in the Internet at the

following address

(http://support.automation.siemens.com/WW/llisapi.dll?aktprim=99&lang=en&referer=%2fWW

%2f&func=cslib.csinfo2&siteid=csius&extranet=standard&viewreg=WW&groupid=4000002) in

the "Contact" area.

EC Declaration of Conformity, certificates, certifications, manufacturers declarations

You can find the EC Declaration of Conformity for the relevant directives as well as the

relevant certificates, prototype test certificates, manufacturers declarations and test

certificates for functions relating to functional safety ("Safety Integrated") in the Internet at

the following address

(http://support.automation.siemens.com/WW/view/en/21901735/134200).

Foreword

SINAMICS S120M Distributed Drive Technology

8Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3

You can obtain an up-to-date list of currently certified components on request from your local

Siemens office. If you have any questions relating to certifications that have not yet been

completed, please ask your Siemens contact person.

Note

You can find certificates for the North American market on the Internet page of t

he certifier:

•

For products with UL certificate (http://database.ul.com/cgi-

bin/XYV/template/LISEXT/1FRAME/index.html)

•

For products with TÜV SÜD certificate (https://www.tuev-

sued.de/industry_and_consumer_products/certificates)

•

For products with CSA certificate (http://www.csagroup.org/de/en/services/testing-and-

certification/certified-product-listing)

Low-Voltage Directive

When operated in dry areas, SINAMICS S units conform to the Low-Voltage Directive

2006/95/EC.

EMC directive

SINAMICS S devices fulfill EMC Directive 89/336/EEC or 2014/130/EEC in the configuration

specified in the associated EC Declaration of Conformity for EMC and when the

Configuration Manual EMC Installation Guideline, article number 6FC5297-0AD30-0☐P☐, is

implemented.

EMC limit values in South Korea

The EMC limit values to be observed for Korea correspond to the limit values of the EMC

product standard for variable-speed electric drives EN 61800-3 of category C2 or the limit

value class A, Group 1 to CISPR11. By implementing appropriate additional measures, the

limit values according to category C2 or limit value class A, Group 1, are observed. Further,

additional measures may be required, such as using an additional radio interference

suppression filter (EMC filter).

The measures for EMC-compliant design of the system are described in detail in this manual

respectively in the EMC Installation Guideline Configuration Manual.

The final statement regarding compliance with the standard is given by the respective label

attached to the individual unit.

Foreword

SINAMICS S120M Distributed Drive Technology

Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3 9

Ensuring reliable operation

The manual describes a desired state which, if maintained, ensures the required level of

operational reliability and compliance with EMC limit values.

Should there be any deviation from the requirements in the manual, appropriate actions (e.g.

measurements) must be taken to check/prove that the required level of operational reliability

and compliance with EMC limit values are ensured.

Spare parts

Spare parts are available on the Internet at the following address

(http://support.automation.siemens.com/WW/view/en/16612315).

Ground symbols

Table 2 Symbols

Symbol

Meaning

Connection for protective conductor (PE)

Ground (e.g. M 24 V)

Connection for function potential bonding

Foreword

SINAMICS S120M Distributed Drive Technology

10 Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3

Autres manuels pour Sinamics S120M

Table des matières

Autres manuels Siemens Contrôleurs

Siemens

Siemens SIMATIC Manuel utilisateur

Siemens

Siemens SIMATIC PN/BACnet LINK Manuel utilisateur

Siemens

Siemens SIRIUS S2 Manuel utilisateur

Siemens

Siemens Simatic S7-1500 Document technique

Siemens

Siemens SSE161.05U Manuel utilisateur

Siemens

Siemens SIMOTION C230-2 Document technique

Siemens

Siemens Simatic S7-300 Manuel utilisateur

Siemens

Siemens SITRANS LUT400 Manuel utilisateur

Siemens

Siemens RVP201 Manuel de l'opérateur

Siemens

Siemens RWF 50.2 Guide de démarrage rapide

Siemens

Siemens RMU7 Sereis Manuel utilisateur

Siemens

Siemens 72G Series Manuel utilisateur

Siemens

Siemens IP Controller N350E Manuel utilisateur

Siemens

Siemens SIRIUS 3RM10 Series Manuel utilisateur

Siemens

Siemens SIRIUS 3RW44 Manuel utilisateur

Siemens

Siemens Climatix POL822 Manuel utilisateur

Siemens

Siemens GBB 2 Series Manuel utilisateur

Siemens

Siemens OpenAir GIB132.1P Manuel du propriétaire

Siemens

Siemens SSD31 Series Manuel utilisateur

Siemens

Siemens SIMATIC Ident Manuel de la liste des pièces

Siemens

Siemens Simatic S7-1500 Manuel de la liste des pièces

Siemens

Siemens SIRIUS M200D Manuel utilisateur

Siemens

Siemens Flowrite 599 Series Manuel utilisateur

Siemens

Siemens Powermite 599 MT Series Manuel du propriétaire

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

3M MicroTouch EX113 Manuel utilisateur