Siemens HiPath Series Manuel utilisateur

Siemens Hipath

User Guide

To make an internal call - Lift handset and dial required extension number OR for hands

free – simply dial the extension and the handset will automatically switch itself to speaker

To make an external call - Follow the same procedure as for making internal calls but

remember to dial 9 first for an outside line and then dial required number

To place caller on hold - At “ENQUIRY” prompt – press TICK key

To retrieve held caller - At “Return to held caller” prompt – press TICK key OR press

relevant flashing line key

To transfer a call - Place the caller on hold with TICK key – dial the required extension.

Replacing the handset or pressing the “RELEASE” key will transfer the call

To transfer to an external number - Place the caller on hold with the TICK key. Dial the

external number, remembering the 9 in front. Use the scroll keys till “TRANSFER?” is in the

display and press TICK

To park a caller - Either press a programmed call park key and then an available parking

space number (0-9) or place the caller on hold and dial

* 56 followed by any parking space number between 0-9

To retrieve a parked call - Either press the programmed call park key and then dial

number where caller was parked – 0-9 or dial # 56 and then dial number where caller was

parked – 0-9

To use speed dials - Dial * 7 or press ab-dial key and then dial appropriate ab-dial

code

To pick up phone ringing elsewhere - Dial * 59 or press Pick-Up key then the extension

number

To use DO NOT DISTURB Press *97 to turn on and #97 to turn off or scroll to DO NOT

DISTURB and then press tick

To Use The Phonebook Feature

Either lift the handset or use handsfree. The display will then read “PHONEBOOK”.

Press the TICK key at this prompt

It will then allow you to use your scroll keys to pick between 3 phonebook lists. Select the

desired one

It will then display the first name (starting with A’s etc.)

Underneath the name the display will read ABC?

If you use your scroll keys here you can go to the next lot of letters – DEF,GHI,JKL etc

Pressing the TICK key selects the letters as displayed

Use your scroll keys to dial the person or to go to next selection

To Use Call Forwarding or Divert

Dial * 11 to divert all calls.

Dial *12 to divert just external calls.

Dial *13 to divert just internal calls.

Dial number where call is to be diverted to

(NOTE: PLEASE INSERT ‘9’ IF AN EXTERNAL DESTINATION)

To Cancel Call Forwarding

Dial # 1

To Store Personal Speed Dials

Dial * 92

Display will then read “ABDIAL NO.” Press the TICK key

It will then display first abdial code (*0)

Underneath this the display will read “Next?”

Press the TICK key at this prompt which will take you to the next abdial code

Using your scroll keys at the “Next?” prompt takes you to “Change Entry”. Press your TICK

key here to store a number under the displayed code

For an outside line, enter a 9 before entering number to be stored

Once number is entered, press the TICK key to confirm and save

Conferencing

Make your first call

Once the call has been answered, use the scroll keys until “SET UP CONFERENCE” is

displayed. Press the TICK key

This places first caller on hold and allows you to make second call

Once the second call has been established you will be offered the feature

“CONFERENCE”. Press the TICK key to connect all three parties

Sending Messages

Use the scroll keys until “SEND MESSAGE” is displayed. Press the TICK key

Enter the extension you want to send the message to

Use your scroll keys to select which message you want to send

Press the TICK key at selected message to send

Advisory Message Text (Absence Messages)

Use scroll keys until “Advisory Msg On” is displayed and then press TICK key

Use scroll keys again to pick selected absence message

Press TICK key to save

To cancel absence text – dial # 69

Caller List (Missed Calls)

This feature lists any missed calls to the phone and also any external numbers saved in

the dialling list

Use the scroll keys until “MISSED CALLS LIST” is displayed. Press the TICK key

Your display will show the first telephone number in the list. Use your scroll keys to call the

number back, see the next number in the list, see when the call was received or you delete

the number from the list

Entry Telephone - Extra Features

To Set Call Forwarding Lift handset

Dial * 11

Dial the extension number of where you want calls forwarded to

You will hear a confirmation tone. Replace the handset (NOTE: INSERT ‘9’

FOR AN EXTERNAL DESTINATION)

To Cancel Call Forwarding

Lift handset and dial # 1



To Store Personal Speed Dials

Lift handset and dial * 92

Dial desired abdial code (from *0 - *9)

Dial 9 for the outside line followed by the number you wish to store

Wait approximately 5 seconds to hear confirmation tone

You can then replace handset

To Change Ringing Tone/Volume

Press + or – key (on right hand side

of receiver)

Press 2 to change the ringing tone or 1 for volume

Press the + or – keys to change the settings

To save desired setting, hold + and – keys down simultaneously

Autres manuels pour HiPath Series

Table des matières

Autres manuels Siemens Système de conférence

Siemens

Siemens Simatic S7-400 Manuel utilisateur

Siemens

Siemens RF180C Manuel utilisateur

Siemens

Siemens Hicom 300 optiset E Standard Manuel utilisateur

Siemens

Siemens CP 342-5 Manuel utilisateur

Siemens

Siemens OZW775 Manuel utilisateur

Siemens

Siemens SIMATIC NET SCALANCE MUM856-1 Manuel utilisateur

Siemens

Siemens SIMATIC NET S7-400 Manuel utilisateur

Siemens

Siemens HiPath 3000 V3.0 or later Gigaset M1... Manuel utilisateur

Siemens

Siemens Synco ZW775 V2.0 Manuel de formation

Siemens

Siemens KNX OZW775 V2.0 Manuel utilisateur

Siemens

Siemens HiPath 3000 Series Manuel de l'opérateur

Siemens

Siemens HiPath3550 Manuel utilisateur

Siemens

Siemens Hicom 150 E Office Manuel utilisateur

Siemens

Siemens CP 1243-1 Manuel utilisateur

Siemens

Siemens Hicom 150 E Office Manuel utilisateur

Siemens

Siemens SCALANCE M804PB Manuel utilisateur

Siemens

Siemens CP 1243-1 PCC Manuel utilisateur

Siemens

Siemens SIMATIC CN 4100 Document technique

Siemens

Siemens CP 443-5 Basic Manuel utilisateur

Siemens

Siemens MK7000 Manuel utilisateur

Siemens

Siemens SIPROTEC4 7UM62 Manuel utilisateur

Siemens

Siemens CP 5623 Manuel utilisateur

Siemens

Siemens SWT-3000 Document technique

Siemens

Siemens Hicom 150 E Office Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Panasonic

Panasonic KX-VC500 Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur