Siebring KRUSER KS750 Manuel utilisateur

KS750 / KS750G

Operator’s Manual

Phone: 888-475-3317 www.siebringmfg.com Fax: 712-475-3490

11/09/18

KRUSER

TABLE OF CONTENTS:

1. Cover

2. Table of Contents

3. Condition of Sale

4. Features & Accessories

5. General Safety

6. Consumer Product Safety Commission Warning

7. Precautions / Shading

8. Operating Instructions / Cordage Chart

9. Motor Electrical Diagram

10. Operating Instructions (continued)

11. Garden hose adapter

12. How it works

13. Tank & Component Diagram

14. Tank & Components Description

15. Unloader Description

16. Unloader Diagram –Spray Mode

17. Unloader Diagram –By-pass Mode

18. Pump / plumbing –Unloader modes

19. Pump Diagram / Misting Tip Assembly

20. Flow Diagram –Typical Kruser

21. Troubleshooting Index

22. Troubleshooting (continued)

23. Troubleshooting (continued)

24. Troubleshooting (continued)

25. Winterizing / Shipping Instructions

26. Parts Reference

27. Warning & Caution Labels

Included: ELEY Hose Reel Instructions, CAT 2SF Data Sheet, CAT

SF Service Manual & Honda Manual (if applicable).

CONDITION OF SALE

SIEBRING MANUFACTURING, INC.

GEORGE, IA 51237

Pursuant to Magnuson-Moss Warranty Federal Trade Commission

ImprovementAct P.L. 93-637, 88 STAT.2183-2193; U.P.C. 2301-2312

(Jan. 4, 1975), the following limited warranty will now replace all prior

warranties issued by Siebring Manufacturing, Inc.

We warrant the equipment manufactured by us to be free from defects in

material and workmanship under normal use and service, our obligation

under this warranty being limited to replacing at our factory any product, or

parts thereof, which shall within one year after delivery thereof to the

original purchaser be returned to us with transportation (UPS Ground)

charges prepaid, and which our examination shall disclose to our

satisfaction to have been thus defective. We neither assume nor

authorize any other person to assume for us any other liability in

connection with such equipment. “Overnight”, “Next Day” or any shipping

method other than UPS Ground will the responsibility of the customer.

This warranty shall not apply to any equipment which shall have been

repaired or altered outside of our factory in any way so as to affect its

stability and reliability, nor which has been subject to misuse, negligence

or accident, nor to any equipment, which shall have been operated

beyond factory rated capacity. We shall not be liable for consequential

damages caused by defective materials, equipment or parts warranted by

their respective manufacturers.

Siebring MFG will not warranty any sprayer manufactured with brass

components that has been used to apply Zerotol or similar products.

Sprayer warranties on units manufactured with stainless steel pumps and

associated components will be honored.

Any implied warranty (including the warranty of merchantability), to the

extent permitted by law, is excluded.

We will not grant any allowance for any repairs or alterations without

written approval of an executive officer, and we reserve the right to make

changes in design, or to make additions to, or improvements in, our

products without imposing any obligations upon the company to install

them on products previously manufactured.

1. CAT Pump

2. Pump Oil Fill Cap

3. Liquid filled gauge

4. Oil Level Sight Glass

5. Filter Bowl with Screen

6. Hose Reel Lock

7. Hose Reel Swivel

8. Fluid Pick-upAssembly

9. By-pass / Fluid return

10. Spray Gun with 18” wand

11. Cap

12. 0° Spray Tip

13. 15° Spray Tip

Sprayer Features & Accessories

12 13

GENERAL SAFETY

1. WARNING –Do not pump flammable or explosive fluids such as gasoline, fuel oil,

kerosene, etc. Do not use in explosive atmospheres. The pump should only be used

with liquids compatible with the pump component materials. Failure to follow this

warning can result in personal injury and/or property damage and will void the product

warranty.

2. Do not run the pump faster than maximum recommended speed.

3. Do not attempt to pump at pressures higher than rated, motor damage may result.

4. Maximum liquid temperature through pump is 140°.

5. Make certain that the power source conforms with the requirements of your equipment

(see cord chart on page 8).

6. Do not operate machine with belt guard, shaft guard or similar safety devices

removed.

7. Prior to servicing, disconnect power, stop engine.

8. Relieve system pressure prior to servicing.

9. Drain all liquids from system before servicing.

10. Secure quick couplers on lines and guns before starting the pump. Aloose quick

coupler may cause a hose whip around under pressure causing personal injury and/or

property damage.

11. Check hoses for weak or worn conditions before each use. Make certain that all

connections are tight and secure.

12. Periodically inspect the pump and system components. Perform routine maintenance

as required. See maintenance section in this manual, CAT pump Service Manual and

Honda engine manual as applicable.

13. Electric motors must be adequately grounded.

14. Do not operate a gasoline engine in an enclosed area. Be sure the area is well

ventilated.

15. Gasoline is a highly combustible fuel. The improper use, storage or handling of

gasoline can be dangerous. Never fill or touch a hot engine.

16. Do not handle a pump or motor with wet hands or when standing on a wet or damp

surface.

17. Use only pipe, hose and fittings rated for the maximum P.S.I.G. rating of the pump. If

an unloader is used, use pipe, hose and fittings rated for the pressure at which the

unloader bypass operates.

The U.S. Consumer Product Safety Commission has issued a warning to

consumers who use electrically powered pressure washers for cleaning milk tanks,

spray tanks, and other farm equipment.

According to a federal safety alert, consumers can receive a fatal electrical shock

from pressure washers if the power cord connections become wet or an internal

short exists.

Since pressure washers are used to spray water, the power cord, washer and

consumer are often wet, and this can be fatal, especially if the machine is not

properly grounded, the report explained.

Consumers should not use adaptor plugs to connect the three-wire plug to a two-

prong household receptacle without properly grounding the adaptor plug. Power

cord connections should never be allowed to lie in water.

The commission urges these precautions:

- Always plug a three-wire grounded pressure washer into a properly grounded

receptacle. If possible, use a receptacle protected by a ground fault circuit

interrupter (GFCI).

- Check all flexible cords, plugs and sockets before each use. Replace any

damaged items.

- If an extension cord must be used, use the heavy-duty three-wire, properly

grounded type, and keep the power cord connection out of the water and away from

the item being washed.

- Wear eye protection when using sprayers or pressure washers.

- Wear rubber-soled footwear when operating the washer.

- Never cut or splice the power cord or extension cords.

- Do not leave hoses or cords where they can be run over and damaged.

- Never remove the grounding prong from the power cord plug.

- Never operate the washer after it has tripped a ground fault interrupter or circuit

breaker without first having it examined by a competent repair person.

- Never allow children to operate a pressure washer, and keep them away from the

washer when an adult is using it.

- Never spray the cleaner at yourself or others. The pressure can cause the water

and cleaner to blast under the skin.

- Never start the washer until you have checked to make sure all coupler hose

connections are in place and locked.

FOR MORE INFORMATION, CONSUMERS CAN CALL THE CPSC TOLL-FREE

HOTLINE, 800-638-CPSC.

WASHERS DANGEROUS, SAFETY PANEL WARNS

KS750 PRECAUTIONS

ALWAYS - RINSE AND FLUSH OUT THE KRUSER AFTER EACH USE.

ALWAYS - DRAIN ANY REMAINING FLUIDS FROM THE SPRAYER TO

PROTECT IT FROM FREEZING.

ALWAYS - READ AND FOLLOW ALL DIRECTIONS OF THE CHEMICAL

MANUFACTURER (CHECK MSDS).

ALWAYS - PUT FRESH, CLEAN WATER IN THE KRUSER AND TEST THE

SPRAYER FOR PROPER OPERATION BEFORE ADDING ANY SPRAYS.

ALWAYS - WEAR PROTECTIVE GEAR WHEN MIXING OR APPLYING ANY

CHEMICALS. THIS INCLUDES MASK, RESPIRATOR, GLOVES,

GOWN, ETC.

ALWAYS - MAINTAIN THE KRUSER IN GOOD REPAIR. THIS

WILL HELP PREVENT LEAKS, ETC. AND ADD TO THE LIFE OF THE

MACHINE.

ALWAYS –WINTERIZE THE PUMP IF COLD WEATHER IS SUSPECT

Shading:

Continental Products Company’s “Kool Ray” liquid shading products are

the only brands authorized for use in the Siebring “Mist R’ Drench” and

“Kruser” line of sprayers.

DO NOT USE LATEX PAINT!

Use of unauthorized products can damage the sprayer pump and

components and will void the warranty.

Prior to applying shading, install a 0° tip and a 50 mesh screen (not

included) in the filter bowl assembly.

KRUSER OPERATING INSTRUCTIONS

PRIOR TO START UP

Completely uncrate unit. Inspect for shipping damages that could interfere with unit

operation. Check for crating/shipping materials lodged in pump/motor assembly, belt

drive (if applicable) steering mechanism and wheel & tire area. Check for foreign debris

in sprayer tank.

Read this manual and comply with all of the safety instructions. Familiarize yourself with

the operating instructions and component location prior to using the unit.

If you have a gas engine powered unit, read and familiarize yourself with the Honda

Owner’s Manual.

Read and be familiar with the CAT Pump manual and operating instructions.

If electrically powered unit, ensure adequate power and extension cords are available to

operate the unit (see chart below).

MOTOR

HP 100 FT. 200 FT. 300 FT. 500 FT.

115V 230V 115V 230V 115V 230V 115V 230V

1/4 # 14 # 14 # 10 # 12 # 8 # 10 # 6 # 8

1/3 # 12 # 14 # 10 # 12 # 6 # 10 # 4 # 8

1/2 # 10 # 12 # 8 # 10 # 6 # 8 # 4 # 6

3/4 # 10 # 12 # 6 # 10 # 4 # 8 # 2 # 6

1 # 8 # 10 # 6 # 8 # 4 # 6 # 4

1 ½ # 4 # 10 # 0 # 8 # 6 # 4

2 # 8 # 6 # 4 # 2

3 # 8 # 6 # 4 # 2

5 # 6 # 4 # 2 # 0

Wire Size for 115 & 230 Volt Single Phase Circuits

Distance –Motor to Fuse or Motor to Meter Box

BLUE 1

ORANGE 3

RED 8

2 WHITE

4 YELLOW

5 BLACK

TOGGLE SWITCH MOUNTED

TO MOTOR ELEC. BOX COVER

120 VAC

CORD

KS/OD 750 MOTOR WIRING (BALDOR CL3510 1 HP.)

LOW VOLTAGE (120 VAC)

Ce manuel convient aux modèles suivants

Autres manuels Siebring Pistolet à peinture

Siebring

Siebring FOX Manuel utilisateur

Manuels Pistolet à peinture populaires d'autres marques

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Manuel utilisateur

Graco

Graco 246737 Manuel d'utilisation et d'entretien

Binks

Binks SV100 Manuel utilisateur

Fimco

Fimco LG-4-3-1 Manuel utilisateur

AG SPRAY

AG SPRAY FS-ATV-25BL Manuel utilisateur

Nordson

Nordson MicroMax 2 Manuel utilisateur

Bonide

Bonide 051 Manuel d'utilisation

zogics

zogics Z-DAS Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-KBS-165 Manuel utilisateur

Matrix

Matrix SG 650 Manuel utilisateur

Anest Iwata

Anest Iwata SGA-3 Guide de démarrage rapide

paasche

paasche VV Fiche technique

Carlisle

Carlisle DeVilbiss JGA-510 Manuel utilisateur

Gardena

Gardena 11120 Manuel utilisateur

Conrad

Conrad Hobby Airbrush K3 Manuel utilisateur

wiwa

wiwa 14025 R/F Manuel utilisateur

Graco

Graco EM 390 Manuel d'utilisation

DeVilbiss

DeVilbiss LUNA2i Manuel utilisateur