SICK WebChecker MLG-2 Manuel utilisateur
TECHNICAL INFORMATION
The MLG-2 as a replacement product for the
MLG-1 and XLG
Quick finder guide for new light grids
Described product
MLG-2
Manufacturer
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Germany
Legal information
This work is protected by copyright. Any rights derived from the copyright shall be
reserved for SICK AG. Reproduction of this document or parts of this document is only
permissible within the limits of the legal determination of Copyright Law. Any modifica‐
tion, abridgment or translation of this document is prohibited without the express writ‐
ten permission of SICK AG.
The trademarks stated in this document are the property of their respective owner.
© SICK AG. All rights reserved.
Original document
This document is an original document of SICK AG.
2T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 8020351.ZLW3/2017-05-03 | SICK
Subject to change without notice
Contents
1 How to find a new MLG-2 light grid as a replacement for your
MLG-1 or XLG..................................................................................... 4
1.1 Finding the right MLG-2 via the type code.............................................. 4
1.2 Finding a replacement for your XLG........................................................ 6
1.3 Type code and ordering information........................................................ 7
2 Advantages of the MLG-2 compared to the MLG-1...................... 8
3 Response times................................................................................. 9
4 Minimum detectable object (MDO) – Cross-beam function....... 10
5 Mounting............................................................................................. 11
5.1 Distance between lower edge of housing and first beam...................... 11
5.1.1 Application 1............................................................................ 12
5.1.2 Application 2............................................................................ 13
5.1.3 Application 3 (PROFIBUS or CANopen)................................... 14
5.1.4 Distance between lower edge of housing and first beam
for all applications................................................................... 15
5.2 Overview of brackets................................................................................ 15
5.2.1 Mounting the MLG-2 with the BEF-1SHABP004 mounting
kit.............................................................................................. 17
6 Electrical connection......................................................................... 19
6.1 Overview of accessories required............................................................ 19
6.2 Adapter cables.......................................................................................... 20
6.3 Connecting the “AFB” terminal box......................................................... 20
6.4 Connecting the M12 female connector.................................................. 22
7 Configuration..................................................................................... 24
7.1 Transferring the parameter settings from the MLG-1 to the MLG-2...... 24
7.2 Saving the MLG-1 parameter settings..................................................... 24
7.3 Setting the parameters for the MLG-2 in SOPAS ET............................... 24
7.3.1 MLGsetup and SOPAS ET user interfaces.............................. 26
7.3.2 “Installation” section............................................................... 26
7.3.3 “Configuration – Outputs” section.......................................... 27
7.3.4 “Configuration – Light beams” section.................................. 32
7.3.5 “Configuration – Inputs” section............................................ 33
7.3.6 “Configuration – Data interface” section............................... 35
8 IPG protective pipes.......................................................................... 36
9 List of tables....................................................................................... 38
CONTENTS
8020351.ZLW3/2017-05-03 | SICK T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 3
Subject to change without notice
1 How to find a new MLG-2 light grid as a replacement for your MLG-1 or
XLG
1.1 Finding the right MLG-2 via the type code
1 ▾ – 0140 ▾ F8 ▾ 1 ▾ 2 ▾
Beam separation
Detection height
Interface, Connection type
Working range
Configuration mode
MLG-2:
Beam separation
Version: Prime, Pro, ProNet
Detection height
Data interface
Options (always 1)
Working range
Software Default
MLG-1:
10 ▾ A ▾ – 0140 ▾ R ▾ 1 ▾ 05 ▾ 01 ▾
Figure 1: Comparison of the MLG-1 and MLG-2 type codes
Beam separation
Table 1: Beam separation
MLG-1 MLG-2
Beam separation
Example: MLG1-xxxxxxxx
Beam separation
Example: MLG10x-xxxxxxxxxx
1: 10 mm 10: 10 mm
2: 20 mm 20: 20 mm
3: 30 mm 30: 30 mm
4: 40 mm 40: 40 mm
5: 50 mm 50: 50 mm
7: 25 mm 25: 25 mm
Detection height
Table 2: Detection height
MLG-1 MLG-2
Detection height
Example: MLGx-0100xxxx
Detection height
Example: MLGxxx0100xxxxxx
0100: 100 mm
to
3140: 3,140 mm
0100: 100 mm
to
3140: 3,140 mm
1 HOW TO FIND A NEW MLG-2 LIGHT GRID AS A REPLACEMENT FOR YOUR MLG-1 OR XLG
4T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 8020351.ZLW3/2017-05-03 | SICK
Subject to change without notice
Interface, connection type → version and data interface
If the interface and connection type of your MLG-1 are not listed in the table below,
please contact your SICK AG sales office.
NOTICE
Additional accessories may be required if you want to use your existing connecting
cables with the MLG-2 (see "Overview of accessories required", page 19).
Table 3: Interface and connection type
MLG-1 MLG-2
Interface and connection
type
Description Data interface Result
Type code
MLGx-xxxxA8xx 2 x AO, 1 x PNP-Out,
1 x PNP-In
M12, 8-pin
B: 2 x analog + 2 x I/O MLGxxA-xxxxBxxxxx
MLGx-xxxxC8xx CANopen
M12, 8-pin
C: CANopen MLGxxN-xxxxCxxxxx
MLGx-xxxxE2xx 6 x NPN-Out, 2 x NPN-In
Terminal compartment
U: Prepared for terminal box 1) MLGxxN-xxxxUxxxxx 1)
MLGx-xxxxE5xx 1 x NPN-Out
M12, 5-pin
R: 2 x Q + 2 x I/O MLGxxA-xxxxRxxxxx
MLGx-xxxxE8xx 3 x NPN-Out, 1 x NPN-In
M12, 8-pin
R: 2 x Q + 2 x I/O MLGxxA-xxxxRxxxxx
MLGx-xxxxF2xx 6 x PNP-Out, 2 x PNP-In
Terminal compartment
U: Prepared for terminal box 1) MLGxxN-xxxxUxxxxx 1)
MLGx-xxxxF5xx 1 x PNP-Out
M12, 5-pin
R: 2 x Q + 2 x I/O MLGxxA-xxxxRxxxxx
MLGx-xxxxF8xx 3 x PNP-Out, 1 x PNP-In
M12, 8-pin
R: 2 x Q + 2 x I/O MLGxxA-xxxxRxxxxx
MLGx-xxxxI2xx 1 x RS-485, 4 x PNP-Out,
2 x PNP-In
Terminal compartment
U: Prepared for terminal box
1)
MLGxxN-xxxxUxxxxx 1)
MLGx-xxxxI8xx 1 x RS-485, 1 x PNP-Out,
1 x PNP-In
M12, 8-pin
I: RS-485 + 2 x I/O MLGxxA-xxxxIxxxxx
MLGx-xxxxN8xx 2 x AO, 1 x NPN-Out,
1 x NPN-In
M12, 8-pin
B: 2 x analog + 2 x I/O MLGxxA-xxxxBxxxxx
MLGx-xxxxP8xx PROFIBUS
M12, 8-pin
P: Prepared for PROFIBUS
replacement module 2)
MLGxxN-xxxxPxxx02
MLGx-xxxxT2xx 1 x RS-485, 4 x NPN-Out,
2 x NPN-In
Terminal compartment
U: Prepared for terminal box
1)
MLGxxN-xxxxUxxxxx 1)
MLGx-xxxxT8xx 1 x RS-485, 1 x NPN-Out,
1 x NPN-In
M12, 8-pin
I: RS-485 + 2 x I/O MLGxxA-xxxxIxxxxx
1) If you want to replace an MLG-1 that has a terminal compartment, you must order an additional item: the DOS-1205-G M12 female con‐
nector for the sender (part number: 6009719).
HOW TO FIND A NEW MLG-2 LIGHT GRID AS A REPLACEMENT FOR YOUR MLG-1 OR XLG 1
8020351.ZLW3/2017-05-03 | SICK T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 5
Subject to change without notice
Table 4: Operating range
MLG-1 MLG-2
Operating range
Example: MLGx-xxxxxx1x
Operating range
Example: MLGxxx-xxxxxx05xx
1: 5 m, ± 3.6° 05: 5 m, ± 3.6°
2: 8.5 m, ± 3.6° 08: 8.5 m, ± 3.6°
4: 5 m, ± 5° 05: 5 m, ± 3.6°
5: 8.5 m, ± 5° 08: 8.5 m, ± 3.6°
Configuration mode → “Software Default”
The choice of variant for “Software Default” depends on the following:
■MLG-1 configuration mode
■The version required, which is determined by the interface and connection type of
the MLG1 (siehe Tabelle 3, Seite 5)
Table 5: Configuration mode – “Software Default”
MLG-1 MLG-2
Configuration mode
Example: MLGx-
xxxxxxxx1
Connection type
Example: MLGx-
xxxxxx5xx
Version
Example: MLGxxA-
xxxxxxxxx
Software Default
Example: MLGxxx-
xxxxxxxx01
1: Standard 5: M12, 5-pin A: Pro 97
5: M12, 5-pin N: ProNet 01
8: M12, 5-pin A: Pro 99
2: Configuration inter‐
face
8: M12, 5-pin A: Pro 99
3: Triple cross beam 5: M12, 5-pin A: Pro 96
8: M12, 5-pin A: Pro 98
L: Triple cross beam,
output Q inverted
5: M12, 8-pin A: Pro 95
Special devices, customer-specific settings or no results at all
In the following cases, please contact your SICK AG sales office:
■Your MLG-1 is a special device: MLGx-xxxxxxxxSxx (example:
MLGx2-1180F822S01)
■Your MLG-1 has customer-specific settings: MLGx-xxxxxxxxKxx (example:
MLGx2-0580F812K01)
■Despite following the procedure described in this chapter, you are unable to find
an appropriate MLG-2 variant to replace your MLG-1 variant.
1.2 Finding a replacement for your XLG
Table 6: Replacement for XLG-1
XLG-1 MLG-2
Type Part number Description Result
Type code
XLG1-0590I812 1065368 Beam separation: 10 mm,
sensing range: 5 m, ± 1.8°
1 x RS-485, 1 x PNP-Out,
1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG10A-0590I10801
1 HOW TO FIND A NEW MLG-2 LIGHT GRID AS A REPLACEMENT FOR YOUR MLG-1 OR XLG
6T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 8020351.ZLW3/2017-05-03 | SICK
Subject to change without notice
XLG-1 MLG-2
Type Part number Description Result
Type code
XLG2-1180I212 1048203 Beam separation 20 mm,
sensing range: 5 m, ± 1.8°
1 x RS-485, 4 x PNP-Out,
2 x PNP-In,
with terminal compartment, con‐
figuration interface
MLG20N-1180U10801
XLG3-1020F812 1046353 Beam separation: 30 mm,
sensing range: 5 m, ± 1.8°
3 x PNP-Out, 1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG30A-1020R10801
XLG3-1470F812 1047926 Beam separation: 30 mm,
sensing range: 5 m, ± 1.8°
3 x PNP-Out, 1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG30A-1470R10801
XLG5-1150T81 1064836 Beam separation: 50 mm,
sensing range: 5 m, ± 1.8°
1 x RS-485, 1 x PNP-Out,
1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG50A-1150I10801
XLG5-1900I212 1048351 Beam separation: 50 mm,
sensing range: 5 m, , ± 1.8°
1 x RS-485, 4 x PNP-Out,
2 x PNP-In,
with terminal compartment, con‐
figuration interface
MLG50N-1900U10801
Special devices, customer-specific settings or no results at all
In the following cases, please contact your SICK AG sales office:
■Your XLG-1 is a special device: XLGx-xxxxxxxxSxx (example: XLG2-1020F412S04)
■Your XLG-1 has customer-specific settings: XLGx-xxxxxxxxKxxx (example:
XLG5-1900I212K001)
■Despite following the procedure described in this chapter, you are unable to find
an appropriate MLG-2 variant to replace your XLG variant.
1.3 Type code and ordering information
For a detailed illustration of the type code and for further ordering information, please
refer to the relevant product information.
■MLG-1 and XLG product information: 8014655
■MLG-2 product information: 8017053
HOW TO FIND A NEW MLG-2 LIGHT GRID AS A REPLACEMENT FOR YOUR MLG-1 OR XLG 1
8020351.ZLW3/2017-05-03 | SICK T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 7
Subject to change without notice
2 Advantages of the MLG-2 compared to the MLG-1
The MLG-2 offers the following advantages over the MLG-1:
■Able to detect smaller objects (high-resolution mode)
■Improved detection of transparent objects thanks to “Transparent mode”
■Improved ambient light immunity due to the smaller aperture angle
■Better able to adapt to the environment and the application thanks to a variety of
operating modes
■Shorter response times and minimum presence time
■Smaller minimum distances when mounting multiple light grids
■Flexible mounting of removable fieldbus module (no blind zone)
■Removable fieldbus modules that can be ordered separately
■Control panel for easy commissioning without a PC
■IO-Link interface V.1.1
■Easy configuration with the SOPAS configuration software via an Ethernet interface
■Configuration options for multiple applications (measuring tasks)
For additional information, see the relevant operating instructions.
2 ADVANTAGES OF THE MLG-2 COMPARED TO THE MLG-1
8T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 8020351.ZLW3/2017-05-03 | SICK
Subject to change without notice
3 Response times
As the MLG-2 offers shorter response times, you may have to adjust the PLC configura‐
tion. Alternatively, you can also set a digital output delay for the MLG-2. See the relevant
MLG-2 operating instructions.
0
5
10
15
20
25
30
35
40
6 50 100 150 200 250 300 350 400 450 500
Response time in ms
Number of beams
MLG-1 / XLG
MLG-2
Figure 2: Comparison of response times for MLG-1 / XLG and MLG-2 with parallel-beam function,
MLG-2 without high-speed scan
The response time depends on the beam function and on which basic function is
selected.
In the case of the cross-beam function, multiply the response time in the diagram by 2.
RESPONSE TIMES 3
8020351.ZLW3/2017-05-03 | SICK T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 9
Subject to change without notice
4 Minimum detectable object (MDO) – Cross-beam function
25 % 50 % 25 %
1 2 1
Figure 3: Cross-beam function
1Area A
2Area B
Operating range 5 m
Table 7: Cross-beam function, operating range 5 m – Minimum detectable object (stationary object) with standard measure‐
ment accuracy
MLG-1 MLG-2
± 3.6° ± 5° MDO ± 3.6° MDO
Beam separa‐
tion
Minimum distance In area A In area B Minimum dis‐
tance
In area A In area B
10 mm 350 mm 180 mm 15 mm > 10 mm 220 mm 14 mm 9 mm
20 mm 650 mm 320 mm 25 mm > 15 mm 440 mm 24 mm 14 mm
25 mm – 400 mm 30 mm > 18 mm 550 mm 29 mm 16.5 mm
30 mm 900 mm 470 mm 35 mm > 20 mm 660 mm 34 mm 19 mm
50 mm 1,500 mm 750 mm 55 mm > 30 mm 1,110 mm 54 mm 29 mm
Operating range 8.5 m
Table 8: Cross-beam function, operating range 8.5 m – Minimum detectable object (stationary object) with standard measure‐
ment accuracy
MLG-1 MLG-2
± 3.6° ± 5° MDO ± 3.6° MDO
Beam separa‐
tion
Minimum distance In area A In area B Minimum dis‐
tance
In area A In area B
10 mm 350 mm 180 mm 20 mm > 15 mm 240 mm 14 mm 9 mm
20 mm 650 mm 320 mm 30 mm > 20 mm 480 mm 24 mm 14 mm
30 mm 900 mm 470 mm 40 mm > 25 mm 720 mm 34 mm 19 mm
50 mm 1,500 mm 750 mm 60 mm > 35 mm 1,200 mm 54 mm 29 mm
4 MINIMUM DETECTABLE OBJECT (MDO) – CROSS-BEAM FUNCTION
10 T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 8020351.ZLW3/2017-05-03 | SICK
Subject to change without notice
Autres manuels pour WebChecker MLG-2
6
Table des matières
Autres manuels SICK Équipements de sécurité
SICK
SICK W16 Manuel utilisateur
SICK
SICK deTec4 Core Manuel utilisateur
SICK
SICK SAFETY MULTI-BOX Manuel utilisateur
SICK
SICK deTec4 Core Manuel utilisateur
SICK
SICK deTec2 Core Manuel utilisateur
SICK
SICK sBot Speed CIP KU Manuel utilisateur
SICK
SICK safeRS Manuel utilisateur
SICK
SICK flexLock Manuel utilisateur
SICK
SICK C4000 Fusion Manuel utilisateur
SICK
SICK nanoScan3 I/O Manuel utilisateur
SICK
SICK ReLy OSSD2 Manuel utilisateur
SICK
SICK TTC100-2 Mode d'emploi
SICK
SICK outdoorScan3 Core I/O Manuel utilisateur
SICK
SICK deTec2 Core Manuel utilisateur
SICK
SICK V200 Manuel utilisateur
SICK
SICK RE300 Manuel utilisateur
SICK
SICK C4000 Micro Manuel utilisateur
SICK
SICK deTec2 Core Manuel utilisateur
SICK
SICK deTec2 Core Manuel utilisateur
SICK
SICK C4000 Select Manuel utilisateur
Manuels Équipements de sécurité populaires d'autres marques
Innova
Innova Xtirpa Mode d’emploi
bolle SAFETY
bolle SAFETY B810 Manuel utilisateur
SHENZHEN FANHAI SANJIANG ELECTRONICS
SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Manuel utilisateur
Hiltron security
Hiltron security POWER8E Mode d’emploi
Hatco
Hatco B-950P Manuel utilisateur
Sitec
Sitec TX MATIC Manuel utilisateur
