7 Installation and use procedures 82
7.1 Before installation 82
7.1.1 Materials required 82
7.1.2 Operating system required 82
7.1.3 Install the safeRS3 Designer application 82
7.1.4 Initiate safeRS/safeRS3 mixed system 83
7.2 Install and configure safeRS/safeRS3 mixed system 83
7.2.1 Install the control 83
7.2.2 Synchronize the controls 83
7.2.3 Define the area to be monitored 84
7.2.4 Configure the inputs and outputs 84
7.2.5 Install sensors on the floor 84
7.2.6 Install the sensors on the machinery 86
7.2.7 Connect the control to the sensors 87
7.2.8 Assign the Node IDs 87
7.2.9 Chain examples 88
7.2.10 Save and print the configuration 88
7.2.11 Set the control Ethernet parameters 89
7.3 Validate the safety functions 89
7.3.1 Validation 89
7.3.2 Validate the access detection function 89
7.3.3 Example of access points 90
7.3.4 Validate the restart prevention function 91
7.3.5 Example of stopping points 91
7.3.6 Validate the system with safeRS3 Designer 92
7.3.7 Troubleshooting validation 92
7.4 Manage the configuration 92
7.4.1 Configuration checksums 92
7.4.2 Configuration reports 93
7.4.3 Change the configuration 93
7.4.4 Back up the configuration 94
7.4.5 Load a configuration 94
7.4.6 Display previous configurations 94
7.5 Other functions 94
7.5.1 Change language 94
7.5.2 Locate the area with detected motion 94
7.5.3 Change the admin password 94
7.5.4 Restore factory default settings 95
7.5.5 Identify a sensor 95
7.5.6 Change network parameters 95
7.5.7 Change Modbus parameters 95
7.5.8 Change Fieldbus parameters 95
7.5.9 Set labels 95
8 Maintenance and troubleshooting 96
8.1 Troubleshooting 96
8.1.1 Control LED 96
8027617/1HVI/2022-09-30 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS/safeRS3 mixed system 7
