SICK AS30 Prime Edge Manuel
TECHNICAL INFORMATION
AS30
Application and Tricks
1 Introduction
The AS30 Application Service package was developed to aid in identification of applica‐
tions that could be solved using the AS30 Array sensor. In this document we will elabo‐
rate on the applications as well as giving a step by step configuration for these applica‐
tions. Keep in mind that this is not an instruction manual on how to do an initial setup
of the device. This information is available in the Device operating instructions. This
document is application based setup, optimization and trouble shooting.
As products become more versatile, they also become more complex. This document
aids in bridging this gap. Information not in this document is available on the SICK Inter‐
nal Intranet and includes AS30 product training, application and setup videos, trou‐
bleshooting guide, firmware information and PLC integrations training Videos.
1 INTRODUCTION
2T E C H N I C A L I N F O R M A T I O N | AS30 8025153/2019-12-10 | SICK
Subject to change without notice
Contents
1 Introduction........................................................................................ 2
2 Getting startet.................................................................................... 4
3 Edge detection of a grid................................................................... 7
4 Guide line detection in print industry............................................. 9
5 Foil control in battery manufacturing............................................. 11
6 Glue line tracking in furniture manufacturing............................... 13
7 Bottle inspection - roundness.......................................................... 15
8 Object diameter measurement....................................................... 17
9 Control of spray jets.......................................................................... 19
10 Detection of spring............................................................................ 22
11 Tool positioning.................................................................................. 24
12 Troubleshooting................................................................................. 26
CONTENTS
8025153/2019-12-10 | SICK T E C H N I C A L I N F O R M A T I O N | AS30 3
Subject to change without notice
2 Getting startet
First steps
1. Type selection
2. Power connection
3. Connection analog output
1 2 - 3 4 5 6 7 8 9 10 11 12 13 14
AS 30 - W B M 5 3 4 I 2 2 0 A 00
Keyposition Performance Scanning
width
Scanning Dis‐
tance
Control Panel Core /
Prime classi‐
fication
3E = Edge
W = Width
P = Position
63 = 30 mm
4 = 45 mm
5 = 50 mm
71 = 25 mm
3 = 100 mm
10 1 = LEDs &
Buttons
2 = TFT Graph‐
ics
11 1 = Core
2 = Prime
3 = Pro
Type selection
Selecting between Core and Prime:
Table 1: Control Panel
Figure 1: TFT Graphic
Figure 2: LEDs & Buttons
AS30 Core AS30 Prime Applications hints
Configuration via Con‐
trol panel
push buttons & LED TFT display more comfortable
2 GETTING STARTET
4T E C H N I C A L I N F O R M A T I O N | AS30 8025153/2019-12-10 | SICK
Subject to change without notice
AS30 Core AS30 Prime Applications hints
Repeatability 0.2 mm 30/50 µm Higher precision
Edge guiding yes yes Choosing E type
Width measurement no yes Choosing W type
Position teach yes yes Single point & window
mode
Enhanced functions fix smoothing adjustable smoothing for smoothing rugged
edges time based
analog scale fix scalable analog range adjustment of mea‐
surement field
Both Core and Prime:
Default Analog scale
Default direction
NOTE PLEASE TAKE CARE:
Reading direction is inverse to slide-in direction!
mA values can be adjusted in Prime version
Table 2: Connection
Pin Color Code Description
1 BN = brown + (L+) Supply plus
2 WH =white Qa Analog output 4 ... 20 mA
3 BU = blue M Supply minus
4 BK = black Q (C) Switching output or IO-Link communication
5 GY = gray MF Multifunction control input
GETTING STARTET 2
8025153/2019-12-10 | SICK T E C H N I C A L I N F O R M A T I O N | AS30 5
Subject to change without notice
Pin Color Code Description
12
5
4 3
Settings via display
The most comprehensive way to configure is via SOPAS as not all settings are available
via the display.
Example for changing to reflector mode:
If a reflector calibration is needed, Sopas will be needed:
2 GETTING STARTET
6T E C H N I C A L I N F O R M A T I O N | AS30 8025153/2019-12-10 | SICK
Subject to change without notice
3 Edge detection of a grid
Task:
During the manufacturing of metal
grids, the customer wants to maintain
the alignment of the product on the
conveyor. As the target product is not a
solid target, a suitable product in an
acceptable price category has not been
found. The customer has considered
analog inductive sensors, photoelectric
arrays and camera systems with mini‐
mal success.
How to ... (Setup and configuration)
The AS30 can be configured as normal to Edge guiding.
Within the Sopas settings, a smoothing adjustment will resolve the issue of the object
not being solid.
•Use the device in Reflector Mode
•Consider a Tilt angle
•Adjust the Smoothing in Sopas
•Use the sensor as normal
Sopas
Smoothing for moving targets.
Setting in Sopas:
Adjust the Smoothing length in accor‐
dance to the speed of the movement
and the size of the openings
EDGE DETECTION OF A GRID 3
8025153/2019-12-10 | SICK T E C H N I C A L I N F O R M A T I O N | AS30 7
Subject to change without notice
3 EDGE DETECTION OF A GRID
8T E C H N I C A L I N F O R M A T I O N | AS30 8025153/2019-12-10 | SICK
Subject to change without notice
4 Guide line detection in print industry
Task:
In large printing houses, the alignment
of the paper is extremely important. On
many occasions, a printing alignment
line is also used. With this line, the
paper edge and the printing edge are
both measured to ensure alignment of
printer head and paper. Camera sys‐
tems have been used to manage this
task, but due to lighting and different
print line colors, repeated setup is
often needed. The customer requires
an accuracy of 0.1 mm with the dis‐
tance from Line to edge calibrated to
13 mm.
How to ... (Setup and configuration)
Using Sopas, the AS30 can be configured to width measurement. Also ensure that the
sensitivity is set to Fine.
On the target, select an Easy Teach-in to detect the first two edges in edge search direc‐
tion.
Select Advanced Teach-in to select the preferred edges.
Sopas
In the Teach-in Wizard, select the Teach-in snapshot and then select the preferred edge.
GUIDE LINE DETECTION IN PRINT INDUSTRY 4
8025153/2019-12-10 | SICK T E C H N I C A L I N F O R M A T I O N | AS30 9
Subject to change without notice
Click to the selected preferred edge
In Process data, select Width Measure‐
ment and Sensitivity Fine.
Selecting a window mode and set-points, you can set the tolerance window.
Within the Process data the width mea‐
surement is visible in reference to the
two selected edges. This value can be
measured with an analogue value as
well as a standard switching output.
4 GUIDE LINE DETECTION IN PRINT INDUSTRY
10 T E C H N I C A L I N F O R M A T I O N | AS30 8025153/2019-12-10 | SICK
Subject to change without notice
Autres manuels pour AS30 Prime Edge
5
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels SICK Accessoires
SICK
SICK LD-MRS 400001S01 Manuel utilisateur
SICK
SICK MAX48 Manuel utilisateur
SICK
SICK GRL18V Manuel utilisateur
SICK
SICK DT1000 Manuel utilisateur
SICK
SICK SIM2000ST-E Manuel utilisateur
SICK
SICK PowerProx WTT12L-A Series Manuel utilisateur
SICK
SICK WT 23-2 Series Manuel utilisateur
SICK
SICK WSE26 Manuel utilisateur
SICK
SICK PowerProx WTT12L Manuel utilisateur
SICK
SICK SFU Series Manuel utilisateur
SICK
SICK Inspector I10 Manuel utilisateur
SICK
SICK Lector620 Manuel utilisateur
SICK
SICK EventCam Manuel
SICK
SICK KTS Manuel utilisateur
SICK
SICK MIS Manuel utilisateur
SICK
SICK LMS4000 Manuel utilisateur
SICK
SICK TiM1 Series Manuel utilisateur
SICK
SICK MultiTask RAY10 Series Manuel utilisateur
SICK
SICK CQF16 Manuel utilisateur
SICK
SICK WTB26 Manuel utilisateur
