9 10
9.Admin Operation
9.1 Add Users
10. Other Operation
10.1 Remove Alarm
8.2 Reader Mode Settings
9.2 Delete Users
10.2 Reset to Factory Default
Note：
When the alarm is activated, users can remove the alarm by reading a valid card or
inputting valid fingerprint or pressing valid admin code.
Note
: Registered user data won’t be deleted when reset to factory default.
Users can reset to the factory default when the admin code is forgotten, or the default settings
have been modified disorderedly, operations as below:
Power off, press and hold the exit button continuously, power on, release the exit button until
hearing beep sound twice, the admin code has been reset to 999999, factory default settings
are successful.
Note：
The admin delete card / admin delete fingerprint is used to delete card / fingerprint users
continuously and quickly. When you read the admin delete card / admin delete fingerprint at the
first time, you will hear short "BEEP" sounds twice and the indicator light turns orange, it means
you have entered into delete user programming, when you read the admin delete card / admin
delete fingerprint at the second time, you will hear long "BEEP" sound once, the indicator light
turns red, it means you have exited the delete user programming.
Enter
programming Menu Operation steps Description Default
value
Press *
Admin code #
(Default
admin code is
"999999")
“…” means
repeating the
previous
operation,
Press * key
to exit.
New admin code # Repeat
new admin code # Change admin code
Set admin add card or
admin add fingerprint
Set admin delete card or
admin delete fingerprint
Delete admin add card or
admin add fingerprint
Delete admin delete card or
admin delete fingerprint
Add fingerprint users
continuously
Add fingerprint users by
specific ID number
10001# Read card / Input
a fingerprint twice *
10001# *
Input a fingerprint twice... *
Input a fingerprint once... * Delete fingerprint users
Delete ALL users
Wiegand 26-58 bits output
Device number
Alarming time range: 0-99 min
10002# *
0000 #
(26-58) #
(0-99) #
(0-255) # 0
0
26
999999
10002# Read card
/ Input a fingerprint twice *
Press ID number # Input a
fingerprint twice … *
0
1
2
1
2
3
5
9
Read valid card Input valid fingerprint Press admin code#
Note：
The admin add card / admin add fingerprint is used to add card / fingerprint users
continuously and quickly. When you read the admin add card / input the admin add fingerprint
at the first time, you will hear short "BEEP" sounds twice and the indicator light turns orange, it
means you have entered into add user programming, when you read the admin add card / input
the admin add fingerprint at the second time, you will hear long "BEEP" sound once and the
indicator light turns red, it means you have exited the add user programming.
Read admin add card / Input admin add fingerprint
Read admin add card / Input admin add fingerprint
Read the 2
nd
user card / Input the 2
nd
fingerprint twice
Read the 1
st
user card / Input the 1
st
fingerprint twice
…,
,
Read admin delete card / Input admin delete fingerprint
Read admin delete cardRead the 2
nd
user card / input the 2
nd
fingerprint once
Read the 1
st
user card / Input the 1
st
…,
,
or or
fingerprint twice
