Shyam HB-20 Series Fiche technique

Next Generation
Signal Enhancement
HB-20 Series Booster
O
OP
PE
ER
RA
AT
TI
IO
ON
N
A
AN
ND
D
I
IN
NS
ST
TA
AL
LL
LA
AT
TI
IO
ON
N
M
MA
AN
NU
UA
AL
L
H
HB
B-
-2
20
0
Home Booster for GSM
5700 9004 050-E REV. 2.0 Mar
,
2006
Proprietary Information
The information contained herein is proprietary to Shyam Telecom Limited.
Unauthorized access, copy and replication is prohibited. Use or disclosure of this
document or the information contained herein, for any purpose other than that fo
r
which it was furnished is not permitted. This document must not be copied in
whole or part by any means or it shall not be disclosed or divulged to any third
Party without the prior written consent of Shyam Telecom Limited.
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 1

Next Generation
Signal Enhancement
Congratulation! You have acquired a world-class repeater. This system has
been designed to operate on the latest digital mobile communication technology
so as to guarantee you enhanced voice clarity each time, every time. It is, as you
will soon find yourself, the ultimate in reliability and quality. This has an elegant
design as SHYAM has always striven to give customer what he wants, at a price
no one can match, and keep him happy after the sale. A result, ensured by an
annual R&D budget of US$ 5 million and the best R&D center in its category
award, by department of Scientific & Industrial Research (DSIR), Government of
India.
Shyam today is US$ 50 million group, number one for Outdoor & In-Building
solution in India, one of the world’s most growing mobile markets.
True to the family to which this system belongs, is uniquely designed to render
crystal clear sound and error free data for a long, very long time. We would
request to go through this easy to understand HB-20 manual to know your
system better.
Regards
Yours Sincerely
(General Manager)
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 2

Next Generation
Signal Enhancement
WARRANTY:
System HB-20 is guaranteed against manufacturing defects of parts and
components inside the system for a period as per warranty clause of purchase
order. Should a defect arise in this system during the period of warranty, Shyam
Telecom Ltd., as the seller undertakes to get the system repaired free of charge,
through its authorized service center. To carry out repair the cost of
transportation have to be borne by the customer.
This warranty is not valid in one or more than one of the following event(s) /
circumstances:
a. Defect caused by negligence, improper use or accident to any part of the
system.
b. If serial number of system is tempered with.
c. If repair / service / modification was done by an unauthorized person.
d. Defects arising out of circumstances beyond control like lightning,
abnormal voltage, act of God etc.
e. If warranty paper is not completed and signed on delivery of the system
by the SHYAM authorized person.
f. The warranty is not applicable to second or subsequent buyer.
g. Please note that the warrant does not extend to any accessory (including
antenna) if any, supplied with the system.
h. The warranty is subject to the jurisdiction of the civil court of Delhi, India,
only.
Our obligation under this Warranty is limited to prompt repair or replacement of
the product, without charge, when the product is returned to the factory.
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 3

Next Generation
Signal Enhancement
The description and characteristics given in this document are of informative significance only and
noncommittal. In fact, to keep up the high quality of our system, we reserve the right to make
change or improvement in this manual without prior notice.
Shyam Telecom evaluates if the product can be repaired or if it is necessary to
replace the unit.
In case the product is out of warranty, the customer will be informed about the
cost for repairing or replacing the unit. The service will be provided only after
receiving the customer’s authorization .Before returning the goods, the customer
should give prior notice to Shyam Telecom through normal return authorization
procedure.
Shyam Telecom aims to offer an excellent service. To do that we ask our
customer to enclose to the returned product an accompanying letter, including
the following information:
Company Name
Address
Contact Person
Invoice Number
Delivery Note
No. of pieces
Model*
Serial Number*
Lot*
Year*
Description of the failure
/ defect
Refer to the serial label
N.B. Each product must be packaged with care before shipment.
Shyam Telecom will issue a check report, which is included in the packing
together with the product being returned. The customer will be informed about
any corrective actions suggested by quality assurance.
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 4

Next Generation
Signal Enhancement
Contents
SECTION 1...........................................................................................................6
1.1 Preamble...................................................................................................6
1.2 About the manual ......................................................................................6
1.3 Important Safety Information .....................................................................6
SECTION 2...........................................................................................................8
2.1 Introduction: Booster Theory / Background ...............................................8
SECTION 3...........................................................................................................9
3.1 Description of HB-20 Booster installation Kit.............................................9
3.2 List of Installation Kit................................................................................10
SECTION 4.........................................................................................................11
4.1 System Design and Setup.......................................................................11
SECTION 5.........................................................................................................12
5.1 Installing the HB-20 .................................................................................12
5.2 Installation Tools......................................................................................12
5.3 Installation Procedure: Do It Yourself .....................................................12
5.4 Power Startup / Alarm Checks / Coverage Testing .................................13
SECTION 6.........................................................................................................15
6.1 Display Details of HB-20..........................................................................15
SECTION 7.........................................................................................................16
Annexure 1……..................................................................................................16
Technical Specification: Boosters HB-20 ...........................................................16
Annexure 2……..................................................................................................18
Trouble shooting procedure HB-20 ...................................................................18
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 5

Next Generation
Signal Enhancement
SECTION 1
1.1 Preamble
In cellular systems boosters / repeaters are used, to enhance the coverage of a
Base station in a region where, due to topological conditions, poor field strengths
disable communication. SHYAM is a leading manufacturer of boosters /
repeaters. These boosters / repeaters provide excellent electrical characteristics,
are lightweight and easy to install.
Any intervention has to be performed by authorized persons only. If you need
technical assistance, please contact at the following address:
SHYAM Telecom Ltd.
246,Phase-4,Udyog Vihar ,Gurgaon, Haryana-122015 (INDIA)
Tel: + 91-124-4311600-09 Fax: +91-124-4018117
Email: [email protected]
Under consideration of all references given in this manual, the repeater should be
taken into service without any complications and should operate trouble free for a
long time.
However we have country wide after sales support network to assist you if
required.
Please visit to our web site www.shyamtelecom.com for our country wide after
sales support offices.
1.2 About the manual
The “Installation and Operation manual” is intended to be used for SHYAM
HB-20 Booster installation. It contains the general guidelines for the field
engineers /technicians. Read carefully before starting the installation.
1.3 Important Safety Information
The HB-20 booster has been designed for maximum safety when installed and
operated according to the instructions in this manual. Refer to all safety
instructions as per the antenna installation instruction sheets.
Do not bypass any of the safety features with the equipment provided, nor
operate the system in an inappropriate environment.
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 6

Next Generation
Signal Enhancement
WARNING! Installation of antennas near power lines is dangerous. For your
safety, follow all installation directions and keep safe distance from any
high voltage power lines that could result in shock or loss of life.
WARNING! This equipment complies with FCC & IC radiation exposure
limits set forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter. The signal booster with server antenna must be installed to
provide minimum 20 cm separation distance between the server antenna to
the body of user or near by person. The donor antenna used for this
transmitter must be fixed-mounted on outdoor permanent structures with a
separation distance of at least 1.5 meters from all persons during normal
operation.
Additional wiring required to install the HB-20 system should comply with national
or local governing Electrical Codes. Indoor RF coaxial cable installations should
comply with local Electrical Code requirements.
The HB-20 booster is designed for indoor application. The housing is not
waterproof, so please keep it away from water, rain and any chemical liquid.
Do discharge the static before you touch the connectors of the booster.
Do not open the module inside the booster unless you are authorized.
The power supply unit in the HB-20 booster is supplied from the mains (primary
AC power) that contains dangerous voltage level which will cause electric shock,
Please turn off the mains before you install / uninstall the booster.The primary AC
power should be in the range of AC100-240V, 50/60Hz. Booster will be damaged
if the primary AC power is out of the range.
The RF electric performance of the HB-20 booster conforms to ETSI
requirement of the inter modulation and spurious emission. It avoids the
interference problem.
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 7

Next Generation
Signal Enhancement
SECTION 2
2.1 Introduction: Booster Theory / Background
In mobile cellular communication system, boosters provide the radio frequency
(RF) coverage to areas, which either lack signal, or the required signal strength is
inadequate for mobile phone performance. To the typical user, this translates to
the inability to place or receive mobile phone calls in or out of the area, and in
most cases will result in a dropped call while entering into the poor coverage
area. Insufficient wireless coverage can occur both indoors and outdoors, and
may include indoor areas such as office buildings, parking garages, apartment
buildings, shopping malls, and residential homes. Outdoor areas are degraded by
geographic topologies such as mountains, valleys, dense foliage and high rising
urban landscapes which can easily degrade or obstruct the cell site’s signal from
the mobile phone.
The weak coverage problem can be solved by installing an active booster
system, designed for use in a multitude of installation configurations. Booster
systems provide an effective solution by redirecting, filtering and amplifying the
available signal at the donor antenna, into the weak coverage area, through a
properly selected interior coverage antenna. The illumination of the weak
coverage area allows the user’s handset to operate as intended within the
building or weak coverage area, while maintaining the user’s call clarity .
Booster
Antenna
Figure 1: Typical Booster/Coverage Configuration
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 8

Next Generation
Signal Enhancement
SECTION 3
3.1 Description of HB-20 Booster installation Kit
The HB-20 booster system contains an automatic power control, bi-directional
amplifier (BDA) supplied along with a donor antenna (highly directive outdoor
antenna) and server antenna (indoor omni directional antenna), specifically
designed for interior configurations. The donor antenna must be pointed toward
the cell of the base station from where the signal is to be picked up and is usually
mounted on the exterior of the building so as to receive the maximum forward
signal level from the base station. The indoor antenna of HB-20 booster provides
RF signal in all directions downward and outward from the installation point.. A
adopter is supplied with HB-20, powered by universal 100-240 VAC mains
supply. A standard length of 10 mtr RF coaxial cable with connectors is supplied
to connect the donor antenna and HB-20 booster. Any other RF coaxial cable
length is also available optionally, on request.
.
Coaxial Cable Server Antenna
U/L Align
D/L Align
Shut Down
RSL Lo
w
RSL Mid
RSL High
+9V DC
AC/DC
Adapter
Donor AntennaDonor Antenna
Figure 4.0 : Installation Diagram of Home Booster
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 9

Next Generation
Signal Enhancement
3.2 List of Installation Kit
1. Donor Antenna – Patch Antenna (Optional 7 dbi)
2. Server Antenna - Whip Antenna. (Optional 0 dbi )
3. RF coaxial cable with SMA to SMA (M) connector. (Optional)
4. Booster HB-20.
5. AC/DC Adapter (9VDC/2.0 Amp.).
6. Mounting Kit.
7. Installation and Operational Manual
File Doc. No. Date Version Page
HB-20 5700 9004 050 Mar,06 2.0 10
Table des matières
Autres manuels Shyam Répétiteur






















