Shyam FS400 Manuel utilisateur

FS400 – 4 Port Ethernet Switch

CLI User Guide

1.0

Proprietary Information

The information contained herein is proprietary to Shyam

Networks Limited. Use or disclosure of this document or the

information contained herein, for any purpose other than that

for which it was furnished is not permitted or it shall not be

disclosed or divulged to any third party without the prior

written consent of Shyam Networks Limited.

FS400 SWITCH CLI USER GUIDE

Rights Reserved. No part of this document, in whole or in part,

may be used, reproduced, stored in a retrieval system or

transmitted, in any form or by any means, electronic or

otherwise, including photocopying, reprinting, or recording, for

any purpose, without the express written permission of Shyam

Networks Limited.

Legal Disclaimer

The content of this document is provided for informational

purpose only. The content is subject to change without notice.

Shyam Networks Limited specifically disclaims all warranties,

express or limited, including, but not limited to the implied

warranties of merchantability and fitness for a particular

purpose, except as provided for in a separate software license

agreement.

FS400 SWITCH CLI USER GUIDE

Contents

1. About This Document............................................................... 9

1.1 Purpose ............................................................................................................9

1.2 Intended Audience......................................................................................9

1.3 Document Conventions ............................................................................9

1.4 Terms and Abbreviations.......................................................................10

1.5 References.................................................................................................... 11

2. Remotely Managing FS400 .................................................... 12

2.1 Using the CLI...............................................................................................12

2.1.1 Accessing CLI using Serial Port.....................................................12

2.1.2 Accessing CLI using Telnet.............................................................15

2.2 CLI Command Syntax ..............................................................................17

2.3 Command Conventions.......................................................................... 17

3. Basic Commands ..................................................................... 18

3.1 help (?)...........................................................................................................18

3.2 show info...................................................................................................... 19

3.2.1 show ip ..................................................................................................20

3.2.2 Changing the IP Address ................................................................21

3.3 Enabling DHCP...........................................................................................22

3.4 Disabling DHCP..........................................................................................23

3.5 Changing Password .................................................................................24

4. Configuration Commands...................................................... 25

4.1 Port Configuration....................................................................................25

4.1.1 show port status.................................................................................25

4.1.2 show port statistics ........................................................................... 26

FS400 SWITCH CLI USER GUIDE

4.2 VLAN Configuration .................................................................................27

4.2.1 vlan pass-all.......................................................................................... 28

4.2.2 vlan mode.............................................................................................29

4.2.3 vlan create............................................................................................30

4.2.4 vlan add.................................................................................................31

4.2.5 vlan insert .............................................................................................32

4.2.6 vlan pvid................................................................................................ 33

4.2.7 vlan leaky .............................................................................................. 34

4.2.8 vlan delete............................................................................................35

4.2.9 vlan ingress-filter ...............................................................................36

4.2.10 no vlan.................................................................................................37

4.3 vlan management-vlan...........................................................................38

4.4 mac-address-table ....................................................................................39

4.4.1 no mac-address-table ...................................................................... 40

4.4.2 learning ................................................................................................. 41

4.5 bandwidth-control ...................................................................................42

4.6 storm-control.............................................................................................. 43

4.7 Port Mirroring Configuration................................................................44

4.7.1 mirror...................................................................................................... 45

4.7.2 no mirror ...............................................................................................46

4.8 Igmp Snooping ..........................................................................................46

4.9 QoS .................................................................................................................47

4.9.1 Port based QoS...................................................................................47

4.9.2 ip based qos......................................................................................... 48

4.10 Link Fault Pass (LFP)...............................................................................49

4.11 Firmware Upgradation .........................................................................50

FS400 SWITCH CLI USER GUIDE

4.11.1 fw-upgrade tftp ...............................................................................50

4.11.2 fw-upgrade serial ............................................................................52

4.12 Saving the Configurations...................................................................54

4.13 Enable PoE.................................................................................................55

4.14 exit................................................................................................................ 55

4.15 Rebooting FS400..................................................................................... 56

4.15.1 boot......................................................................................................56

4.16 reset .............................................................................................................57

FS400 SWITCH CLI USER GUIDE

Figures

Figure 2: Connect To Dialog Box.....................................................................13

Figure 3: Properties Dialog Box.......................................................................14

Figure 4: Logon to HyperTerminal ................................................................. 15

Figure 5: Login Details ........................................................................................16

Figure 6: Login to FS400..................................................................................... 16

Figure 7: Full Help Arguments Window.......................................................18

Figure 8: Show Info ..............................................................................................20

Figure 9: Show IP................................................................................................... 21

Figure 10: Changed IP Address and Gateway............................................ 22

Figure 11: Displaying the Last Saved Static IP ...........................................23

Figure 12: Change Password ............................................................................ 24

Figure 13: Show Port Status.............................................................................. 26

Figure 14: Show Port Statistics ........................................................................27

Figure 15: vlan pass-all........................................................................................ 29

Figure 16: Vlan Mode........................................................................................... 30

Figure 17: Create Vlan ......................................................................................... 31

Figure 18: Add Vlan.............................................................................................. 32

Figure 19: VLAN insert......................................................................................... 33

Figure 20: Vlan Pvid .............................................................................................34

Figure 21: Leaky Vlan........................................................................................... 35

Figure 22: Delete Vlan.........................................................................................36

Figure 23: Vlan Ingress Filter ............................................................................37

Figure 24: Delete Vlan.........................................................................................38

FS400 SWITCH CLI USER GUIDE

Figure 25: Vlan Management...........................................................................39

Figure 26: MAC Address Table......................................................................... 40

Figure 27: Delete MAC Address Table...........................................................41

Figure 28: Learning ..............................................................................................42

Figure 29: Bandwidth Control..........................................................................43

Figure 30: Storm Control.................................................................................... 44

Figure 31: Mirroring .............................................................................................45

Figure 32: Delete Mirroring............................................................................... 46

Figure 33: Igmp Snooping................................................................................. 47

Figure 34: QoS........................................................................................................48

Figure 35: IP based QoS...................................................................................... 49

Figure 36: Command to Upgrade Firmware using TFTP .......................51

Figure 37: File Transfer using TFTP.................................................................51

Figure 38: Command to Upgrade Firmware Using Serial Port ............53

Figure 39: File Transfer using Serial Port...................................................... 53

Figure 40: Sending File ....................................................................................... 54

Figure 41: Saving the Configuration ............................................................. 55

FS400 SWITCH CLI USER GUIDE

Tables

Table 1: Document Conventions .......................................................................9

Table 2: Terms and Abbreviations Used in the Document ................... 10

Table 3: Command Conventions ....................................................................17

Table 4: Configuring the Terminal Emulation Console ..........................52

FS400 SWITCH CLI USER GUIDE

1. About This Document

1.1 Purpose

This guide familiarizes you with the command line interface (CLI)

commands to configure the FS400 switch. You can configure

FS400 from a remote location through a serial port or Telnet.

1.2 Intended Audience

The intended target groups for this document are:

•System Administrators

•Field Engineers

1.3 Document Conventions

The different conventions used in this document are explained

in the following table:

Table 1: Document Conventions

Conventions Description

Note: Provides information about

important features or instructions.



Caution: Alerts you to potential

damage to a program, device, or

system.



Warning: Alerts you to potential injury

or fatality. May also alert you to

potential electrical hazards.

FS400 SWITCH CLI USER GUIDE

Conventions Description

file/directory

names

All courier new.

Bold font Any option that needs to be selected or

typed in the user interface is

represented using bold font.

cd $HOME A command that you must enter in a

Command Line Interface (CLI) exactly

as written.

<home_directory> Command variables, the values of

which you must supply.

1.4 Terms and Abbreviations

The different terms and abbreviations used in this document are

explained in the following table:

Table 2: Terms and Abbreviations Used in the Document

Terms / Abbreviations Description / Expansion

CLI Command Line Interface

CRC Cyclic Redundancy Check

DHCP Dynamic Host Configuration Protocol

IGMP Internet Group Management Protocol

IP Internet Protocol

Kbps Kilo Bits Per Second

MAC Media Access Control

Table des matières

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité