Shure RMCE-UNI Manuel utilisateur
1/3
RMCE-UNI -- Shure Remote + Mic UNI Ca-
ble
UNI Accessory Cable
Shure UNI cables are designed for continued functionality between mobile devices and your Shure earphones.
They feature a 3.5 mm (1/8") TRRS connector and three button controls with in-line microphone for phone calls
and voice applications.
Features
•3.5 mm (1/8") cable adapter
•Selectable Android or iOS operation
•Three button control functionality
•In-line microphone
•Legendary Shure quality and reliability
The Universal Switch
The universal switch is located on the base of the three button remote. Select A when using an Android device or
select i when using iOS.
Using the Remote
Use the remote to control compatible media phone players.
Shure Incorporated
2/3
Play music Click the center button once
Pause music Click the center button once.
Change volume Click the volume up (+) or volume down (-) button to
increase or decrease the volume.
Go to next track Double-click the center button.
Go to previous track Triple-click the center button.
Restart current track Triple-click after 6 seconds.
Fast-forward Double-click and hold the center button.
Send/End Call Click the center button once.
For more information about compatible models go to: www.shure.com
Specifications
Connector
3.5 mm (1/8")
Housing
ABS plastic with TPE strain-relief.
Maximum Cable Length
50 in.
Cable Diameter
3 mm
Net Weight
0.7oz.
Certifications
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded
(screened) cable types may degrade EMC performance.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Incorporated
3/3
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: [email protected]
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered in the
U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc. The trademark "iPhone" is used with
a license from Aiphone K.K.
Table des matières
Autres manuels Shure casque
Shure
Shure BRH31M Manuel utilisateur
Shure
Shure BRH31M Manuel utilisateur
Shure
Shure BRH440M Manuel utilisateur
Shure
Shure TwinPlex TH53-MTQC Manuel utilisateur
Shure
Shure DuraPlex DH5 Manuel utilisateur
Shure
Shure BRH50M Manuel utilisateur
Shure
Shure IH 6500 Manuel utilisateur
Shure
Shure BRH441M Manuel utilisateur
Shure
Shure IH 6500 Manuel utilisateur
Shure
Shure BRH50M Manuel utilisateur
