- 4 -
Only the treadmill had finished the installation and the motor protect cover is put on, you can
connect power line. Plug in the power line into the power socket which is with the 16Asafety
grounding, we suggest you to use over current protector to ensure the safety of the user and the
treadmill.
1．PLS place the treadmill on a clear, level ground. Do not place the treadmill on thick carpet ,as
not to effect with ventilation under the treadmill. Also do not use the treadmill placing it by water
or outdoor,notice to avoid moisture.The treadmill power line is specific, if the power line is
damaged, please purchase from the dealer, or contact to the company directly.
2．When you place the treadmill, do not let the treadmill cover the socket on the wall, which is
convenient to plug in the power line.
3．Never start the treadmill while you are standing on the running belt. After connecting the power,
there maybe a pause after the running belt begins to move, you should always stand on the
treadmill side plastic non-slip rails until the belt is moving.
4．Do not wear long, loose fitting clothing when you exercise, in case it may get caught in the
treadmill. Usually you need to wear running shoes or sports shoes with rubber soles.
5．Never remove the protective cover casually, if need to open for maintenance, PLS make sure to
unplug the power line firstly.
6．Keep the kids away from the treadmill during using.
7．When you use the treadmill the first time, hold the handrails until you adapt.
8. The treadmill equipment is made for special use, Please do not remodel or refit for other use.
If the treadmill suddenly increase in speed or speed up continually, due to an electronic system
problem, please pull out the safety switch, the treadmill will immediately stop.
