Shell RIDE SR-5S Manuel utilisateur
Explanation of symbols 3
Introduction 4
Delivery contents 4
Quick start guide 5
Intended use 6
Important safety instructions 6
Technical specifications 8
General information 9
Assembly 10
Display functions 11
Battery Usage 12
Before using your e-scooter 15
Shell RIDE app 16
Getting started 17
Cruise control mode 18
After you’re done riding 18
Storage, maintenance and cleaning 19
Warranty 24
Customer service 28
Disposal instructions 29
Certifications 29
Trademark 30
Table of contents
2
Shell
RIDE
Explanation of symbols
Contains important information for avoiding injuries.
Contains important information for preventing damage to the product.
Draws your attention to important information and notes when reading the
instruction manual.
Shell
RIDE 3
Thank you for purchasing the Shell SR-5S e-scooter!
Please read the instruction manual carefully before operating the e-scooter, and ensure that
the e-scooter is used properly and in accordance with the instructions.
Retain this instruction manual for future reference. Only give the SR-5S e-scooter to third
parties in conjunction with the instruction manual. Ensure any third party has completely read
and follows the SR-5S e-scooter manual.
The manufacturer reserves the right to make changes to the product including firmware for the
SR-5S e-scooter and the Shell RIDE APP.
The instruction manual and illustrations within it may differ depending on the model.
We hope you enjoy safely using your Shell SR-5S e-scooter
Delivery contents
Introduction
Shell SR-5S e-scooter User manual
Assembly tool Handlebar mounting screws x 4
4
Shell
RIDE
Quick start guide
Shell
RIDE 5
QUICK START GUIDE
Time to RIDE
1
2
3
4
5
1
2
3
4
5
SET-UP
WARNING
1
2
Unfold the SR-5S. Attach the handle bar to the steering post with the four (4) screws
provided in the box. Use the wrench included to tighten the screws securely without
over-tightening which could result in stripping the heads of the screws.
Plug in the AC adapter into the SR-5S and then into the wall outlet until the green light
displays on the AC adapter which means the SR-5S is fully charged.
Download the SHELL RIDE APP from the Google Play Store or Apple APP Store on your
mobile device.
Once the SHELL RIDE APP is downloaded, the APP will walk you through the setup process.
Watch the SHELL RIDE safety video.
Power on the SR-5S. Wear a helmet.
Place one foot on the rubber deck mat with the other foot on the ground.
Push off with your foot on the ground while touching the throttle with your right thumb.
Steer by using the handle bars and also slight leaning either left or right while turning.
Brake and stop by depressing the brake lever on the right
side of the handle bar which engages the rear disc
brake. Dual braking is achieved while depressing
the right brake lever and the electronic brake
located on the left side of the handle bar
using your left thumb.
Please read the user manual and watch the safety video before riding your SR-5S! Always wear a helmet. Follow local traffic
laws and know proper rules for operating e-scooter in your area. Avoid safety risks while being courteous to pedestrians.
Shell Group and its distributors reserve the right to make improvements to the product, firmware updates and the user manual at any time. Visit www.shellride.com to download
the latest product information. Lotus International Company is a Shell licensee and uses Shell trademarks under licence. The views expressed in this release or statement are
made by Lotus International Company, and are not made on behalf of, nor do they necessarily reflect the views of, any company of the Shell Group of Companies.
Go to the Google Play Store (Android) or the Apple App Store (iOS) and search for the “Shell Ride” to download and install
the App. Be advised there is a minimum Android/iOS/Bluetooth version required. See User Manual for additional details.
Customer Service: 1-855-585-9141 • serviceNA@shellride.com
Shell
RIDE
The Shell SR-5S e-scooter is a vehicle designed for one person for passenger transport.
The e-scooter is exclusively for private use and is not suitable for commercial use.
Only use the e-scooter as described in this instruction manual. Any other use is considered improper
and may result in material damage or even injury to people.
The manufacturer and distributor accept no liability for damage caused by unintended or improper use.
Important safety information
Intended use / Important
safety information
6
• Please strictly comply with the safety regulations stated in the manual. The manufacturer or distributor
cannot be held liable for any injury to persons, material damage, accidents or legal disputes resulting from
the violation of the safety regulations. Liability is always limited to the purchase value of the e-scooter.
• The e-scooter has been designed to transport one person with a maximum weight of 220 lbs.
• Please check your e-scooter before every ride (see the “Storage, maintenance and cleaning” section).
• Do not use the e-scooter if there is visible damage or if the power cord or plug is damaged.
• Modifying the e-scooter is not permitted.
• Repairs may only be carried out by qualified personnel authorized by Shell or their distributors.
Liability and warranty claims are excluded if repairs are carried out independently or in the event
of improper connections or incorrect operation.
• Always wear a safety helmet, appropriate clothing, protective gear and flat-heeled shoes.
• Hold the handlebars with both hands while riding the e-scooter.
Shell
RIDE
Important safety information
7
• Practice riding the e-scooter on open and level terrain initially.
• Obey all local traffic laws and regulations. Do not ride where prohibited by local laws.
• The e-Scooter is suitable for use on flat, dry surfaces. Do not ride through water, during rain, at night
or in poor visibility.
• The e-scooter is not suitable for performing stunts DO NOT TRY to jump it or perform any other
dangerous maneuvers.
• Do not leave the e-scooter outdoors. Please store it in a dry, dark location.
• Before each ride, check that all screws are firmly tightened.
• Be careful not to touch any moving parts during the ride, in order to avoid injuries.
People who should not ride the e-scooter include:
• Children under 12 years of age.
• If you under the influence of alcohol or drugs.
• If you have a problem with balance or motor skills that would interfere with their ability to
maintain balance.
• If your weight exceeds 220 lbs.
Shell
RIDE
Technical specifications
8
Motor: Front-wheel motor with 350-watt capacity
Battery: 36 V / 7.8 Ah lithium ion with LG cells
Charging time: Approx. 5 hours
Brakes: Disc brake at rear, electric brake at front
Features: Bell, front light, rear light, reflectors, LED display
Dead weight: 30.4 lbs (13.8 kg)
Maximum load: 220 lbs (100 kg)
Maximum speed: 15.5 mph (25 km/h)
Maximum range: 18 miles (30 km)
Tires: 8.5” semi-pneumatic tires front and rear
Product size: 43.3” x 16.9” x 46.1” (110 x 43 x 115 cm)
Gradeability: 7 degrees
Shell
RIDE
General information
1 - Display
2 - Bell
3 - Brake lever (disc brake)
4 - Thumb throttle
5 - Electric brake
6 - Light
7 - Folding mechanism
8 - Charging port
9 - Kickstand
10 - Rear light
11 - Folding latch
3
4
5
1
2
7
9
11
10 8
6
9
Shell
RIDE
Assembly
Raise the handlebars until the folding mechanism clicks into place. Secure it by turning the locking
ring until the marking is pointing towards the bolted lock symbol.
Connect the plug of the control cable and then place the handlebars onto the steering column.
Use the Allen key to fix the handlebar in place with the 4 screws.
10
Shell
RIDE
Table des matières
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur