Sharp FU-S25E Manuel utilisateur

ENGLISH

FU-S25E

HECCRBQ

ESPAÑOL FRANÇAIS ENGLISH

ITALIANO

NEDERLANDS

DEUTSCH

*Plasmacluster is a trademark of

Sharp Corporation.

Free standing type

Tisch- / Wandgerät

Type de table / installation murale

De sobremesa / instalación en la pared

Tipo da scrivania / parete

Tafelmodel / wandmodel

AIR PURIFIER

OPERATION MANUAL

LUFTREINIGER

BEDIENUNGSANLEITUNG

PURIFICATEUR D'AIR

MANUEL D'UTILISATION

PURIFICADOR DE AIRE

MANUAL DE USO

PURIFICATORE

DELL’ARIA

MANUALE OPERATIVO

LUCHTREINIGER

GEBRUIKSAANWIJZING

Please read before operating your new Air Purifier

The air purifier draws in room air from its air intake, lets the air pass through a

Active Carbon Filter (deodorization filter) and a HEPA Filter (dust collection

filter) inside of the unit, then discharges the air from its air outlet. The air

purifier unit repeats this process by moving its internal fan.

As air passes through, a new HEPA Filter can remove 99.97% of dust parti-

cles, of as small as 0.3 microns. The Active Carbon Filter gradually absorbs

odour elements as they repeatedly pass through the filter. (Odour elements

are absorbed by HEPA Filter as well.)

Some odour ingredients absorbed by the filters may become separated and

may be discharged through the air outlet and result in additional odour. De-

pending on the usage environment, especially when the product is used in a

condition significantly more severe than household use, this odour may be-

come strong in a shorter period than expected.

If the odour persists, then the filters are fully expended and it is necessary to

purchase the optional replacement filter.

ENGLISH

NOTE

• The air purifier is designed to remove air-suspended dust and odour, but not harmful gases (for

example, carbon monoxide contained in cigarette smoke). If the odour sources still exist, it cannot

completely remove the odour. (for example, odours from construction materials and pet odours).

• It is suggested to open the window a bit when you are smoking in order to facilitate ventilation.

ENGLISH

FEATURES

ION SHOWER

E-1

Thank you for purchasing the SHARP Air Puri-

fier.Pleasereadthismanualcarefullyforthecor-

rect usage information. Before using this prod-

uct,besuretoreadthesection:“Important Safety

Instructions.”

After reading this manual, retain it in a conven-

ient location for future reference.

IMPORTANT SAFETY INSTRUCTIONS ....

E-2

• WARNING....................................................E-2

• CAUTIONS CONCERNING OPERATION ...E-3

• INSTALLATION GUIDELINES .....................E-3

• FILTER GUIDELINES ..................................E-3

PART NAMES..........................................E-4

• MAIN UNIT DISPLAY...................................E-4

• ILLUSTRATIVE DIAGRAM .........................E-4

• BACK ...........................................................E-5

• INCLUDED...................................................E-5

PREPARATION........................................ E-6

• FILTER INSTALLATION ...............................E-6

OPERATION ............................................E-8

• MAIN UNIT OPERATION.............................E-8

CARE AND MAINTENANCE................. E-10

• MAIN UNIT................................................ E-10

• FILTER ...................................................... E-10

• SENSOR................................................... E-10

•

WASHABLE ACTIVE CARBON FILTER CARE ....

E-11

• FILTER REPLACEMENT

GUIDELINES ............................................ E-12

TROUBLE SHOOTING.......................... E-13

SPECIFICATIONS ................................. E-14

INFORMATION ON PROPER DISPOSAL ...

E-15

CONTENTS

New ION SHOWER Operation Mode

releases the concentrated Plasmacluster

Ions, and effectively removes the pollen

and mold, and also controls the activity of

airborne virus, mold, and allergen.

Plasmacluster Ion Control

Your new air purifier will control the ratio

of negative ions and positive ions de-

pending on the condition of the room.

• Clean Mode

Approximately the same numbers of

positive and negative ions are dis-

charged.

• AUTO Plasmacluster Ion

Mode

Theunitwill switchbetween Clean Mode

andIonControl Mode* automaticallyde-

pending on the amount of impurities in

the air detected by the odour and dust

sensors.

*Ion Control Mode

Negative ions will be released in an

increased rate and controls the ion

balance.

• Filters

1) Washable Active Carbon Filter

Absorbs odour elements.

Washable to maintain optimum

deodorization performance.

2) HEPA (High Efficiency

Particulate Air) Filter

High-efficiency particle collection in-

cluding pollen and dust.

E-2

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should be followed, including the

following:

WARNING - To reduce the risk of electrical shock, fire or injury to persons:

• Read all instructions before using the air purifier.

• Use only a 220-240 volt outlet.

• Do not use the air purifier if the power cord or plug is damaged or the connection to the wall

outlet is loosened.

•Periodically remove dust from the power plug.

• Do not insert fingers or foreign objects into the intake or air outlet.

• When removing the power plug, always hold the plug and never pull the cord.

Electrical shock and/or fire from short circuit may occur as a result.

• Do not remove the plug when your hands are wet.

• Do not use this air purifier near gas appliances or fireplaces.

• Remove the power plug from the wall outlet before cleaning the unit and when not using the

unit.

Electrical shock from bad insulation and/or fire from short circuit may occur as a result.

• If the power cord is damaged, it must be replaced by the manufacturer, its service agent,

Sharp authorized Service Centre or similarly qualified person in order to avoid a hazard.

•Do not operate when using aerosol insecticides or in rooms where there is oily residue, incense,

sparks from lit cigarettes, chemical fumes in the air or in very high humidity condition, such as a

bathroom.

•Be cautions when cleaning the air purifier. Strong corrosive cleansers may damage the exterior.

•Only Sharp Authorized Service Centre should service this air purifier. Contact the nearest Service

Centre for any problems, adjustments, or repairs.

NOTE - Radio or TV Interference

Ifthis airpurifier should cause interferenceto radioor television reception,try tocorrect the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the air purifier and radio/TV receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV technician for help.

ENGLISH

E-3

CAUTIONS CONCERNING OPERATION

• Do not block the intake and air outlet.

• Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into

contact with steam.

• Do not lay the unit down when using.

• Always hold the handle on the back of the unit when moving it.

Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in

bodily injury.

• Do not operate the unit without the filter.

• Do not wash and reuse HEPA filter .

It not only does not improve filter performance, it may cause electric shock or malfunction.

• Clean the exterior with a soft cloth only.

The unit surface may be damaged or cracked.

In addition, the sensors may malfunction as a result.

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION GUIDELINES

• During the operation of the product, please place the unit at least 2m away from equipments

which involve electric wave such as televisions, radios or wave clocks, in case electrical

interference occurs to such equipment.

• Avoid a location where the sensor is exposed to direct wind.

The unit may not operate properly.

• Avoid locations where curtains, etc., come into contact with the intake or air outlet.

Curtains, etc., may become dirty or a malfunction may occur.

• Avoidlocations where the unit is exposed tocondensation, due to drastic temperature changes.

(Use under appropriate conditions between 0 and 35˚C in the room.)

• Place on a stable surface with sufficient air circulation.

When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.

• Do not install when there is generation of lampblack, such as in a kitchen, etc.

The unit surface may crack or the sensor may malfunction as a result.

• Leave about 60cm of space from the wall.

The wall behind the air outlet may become dirty as time passes. When using the unit for extended

period of time in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In

addition, periodically clean the wall.

FILTER GUIDELINES

• Follow the instructions in this manual for correct care and maintenance of the filters.

E-4

PART NAMES

MAINUNIT DISPLAY

ILLUSTRATIVE DIAGRAM

Main Unit

Odour Sensor

HEPA Filter

(blue/white)

(black)

Filter Support

Front Panel

Washable Active

Carbon Filter

Fan Speed Indicator Lights

Pollen Mode Indicator Light

ION SHOWER Indicator Light

AUTO Operation Indicator Light

Plasmacluster Ion Mode

Indicator Lights

POWER ON/OFF Button

Plasmacluster Ion Mode Selection Button

Mode Selection Button

Odour Senser

(

ENGLISH

E-5

INCLUDED

• Operation manual

BACK

ENGLISH

Blue light

• When the Plasmacluster ion operation is in Clean Mode, or in AUTO Plasmacluster Ion Mode and the air in the

room is impure, the light will be activated and the unit will operate in Clean Mode.

• When the Plasmacluster ion operation is in ION SHOWER Mode, the light will repeat its colour cycles between

light and shade.

Green light

When the Plasmacluster ion operation is in the Ion Control Mode, or in AUTO Plasmacluster Ion Mode and the air

in the room is clean, this light will be activated and the unit will operate in Ion Control Mode.

The colour changes according to the air condition.

ABOUT THE CLEAN-SIGN

• The condition of the CLEAN-SIGN depends on the room air condition detected by the Odour Sensor when the

plug is inserted into the wall outlet.

• It is possible to have a green CLEAN-SIGN with impurities in the air at the time that the air purifier was just

introduced to the room environment.After a while, however, the base impurity rate will be adjusted to detect room

air condition correctly.

DETERMINING THE BASE IMPURITY RATE

For the first 30 seconds after the power plug is inserted into the wall outlet, the unit will check the conditions of the

air. If operation is set to ON during this time, the CLEAN-SIGN LIGHT will alternately flash in green, orange and red.

Green

Clean Slightly Impure Very Impure

Orange Red

Air Outlet

Data Label

Power Cord

Power Plug

Handle

ode

CLEAN - SIGN Light

Plasmacluster Indicator Lights

(Please refer page E-9)

(Sharp of plug depends on country.)

PREPARATION

E-6

Be sure to remove the power plug from the wall outlet.

To maintain the quality of the filters, they are installed in the main unit and packed in

plastic bags. Be sure to remove the filters from the plastic bags before using the unit.

Remove the filters

Remove the Front Panel.

Pull the bottom of the Front Panel.

Remove the Active Carbon

Filter and HEPA Filter.

FILTER INSTALLATION

Remove the Filter Support.

Pinch the two tabs and lift to remove.

Front Panel

Up side Tabs Tabs

Active Carbon Filter

HEPA Filter

Main Unit

Active Carbon Filter

Remove the Active Carbon

Filter and HEPA Filter from

the plastic bags.

HEPA Filter

ENGLISH

Install the filters

Place the HEPA Filter

within the main unit with

the tabs facing up.

Donot install the filter backwardsor

the unit will not operate properly.

Place the Active Carbon

Filter on top of the HEPA

Filter.

Make sure that the tab of the

HEPA Filter remains visible.

Fill in the usage start date

on the Date Label.

Use the date as a guide for the

Filter Replacement schedule.

Insert the bottom side tabs of the Filter Support

into the associated holes of the main unit.

Next push the upside tabs into the main unit.

HEPA Filter

Active Carbon Filter

Up side Tabs

Holes

Bottom side tabs

Date Label

Tabs

Filter Support

Fix the Front Panel to the

main unit.

E-7

Tab

Tabs

OPERATION

MAIN UNIT OPERATION

E-8

Power ON/OFF Button

• Used to start operation (short beep) and stop operation (long

beep)

• Plasmacluster Indicator Light and Fan Speed Indicator Light

turn on/off.

•Unless unplug the power cord, the operation starts in the

previous mode the unit was operated in.

MODE Selection Button

• The operation mode can be switched.

AUTO operation

Thefanspeedisautomaticallyswitched(HIGH*,MEDIUM,

SILENT) depending on the amount of impurities in the air.

The sensors detect the impurities for efficient air purifica-

tion.

POLLEN mode operation

The unit will operate at HIGH* fan speed for 10 minutes,

then will alternate between MEDIUM and HIGH* for

20 minutes.

10 minutes: HIGH fan speed

20 minutes:

MEDIUM fan speed

20 minutes: HIGH fan speed

SILENT

operation

The unit will operate

quietly using minimal air

intake.

MEDIUM operation

The unit will operate at a

fan speed of MEDIUM.

MAX operation

The unit will operate at a

fan speed of MAX.

*HIGH fan speed is an in-

termediate speed be-

tweenMEDIUM andMAX.

ION SHOWER operation

TheconcentratedPlasmacluster Ions(IONSHOWER) will

be generated in the room like a shower for 15 minutes,

repeating the airflow cycles between strong and gentle.

(The Plasmacluster Indicator Light repeats its colour

cycles between light and shade.), and effectively controls

the airborne dust, pollen, mold, and allergen.

•Whenfinishedtheoperation, theunitwillback to theAuto

operation.

Plasmacluster ION Mode Indicator Lights

Plasmacluster Indicator Lights

Table des matières

Langues :

Autres manuels Sharp Purificateur d'air

Sharp

Sharp FU-W40A Manuel utilisateur

Sharp

Sharp FP-F60U-W Manuel utilisateur

Sharp

Sharp IG-BC2E Plasmacluster Ion Manuel utilisateur

Sharp

Sharp FP-JM30E Manuel utilisateur

Sharp

Sharp FP-J30E Manuel utilisateur

Sharp

Sharp FZ-Y30SFE Mode d’emploi

Sharp

Sharp FP-J50J Manuel utilisateur

Sharp

Sharp Plasmacluster KC-30TX1 Manuel utilisateur

Sharp

Sharp FP-JM40B Manuel utilisateur

Sharp

Sharp KI-L80 Manuel utilisateur

Sharp

Sharp Plasmacluster KC-850U Manuel utilisateur

Sharp

Sharp FX-S120 Manuel utilisateur

Sharp

Sharp Plasmacluster FP-A28C Manuel utilisateur

Sharp

Sharp Plasmacluster KC-860U Manuel utilisateur

Sharp

Sharp Plasmacluster FP-P30U Manuel utilisateur

Sharp

Sharp Plasmacluster FP-P30U Manuel utilisateur

Sharp

Sharp FU-60SE-TA Manuel utilisateur

Sharp

Sharp FP-F40A Manuel utilisateur

Sharp

Sharp IG-CM1A Manuel utilisateur

Sharp

Sharp FX-J80U Manuel utilisateur

Sharp

Sharp FP-F60U-W Manuel utilisateur

Sharp

Sharp FU-440E Manuel utilisateur

Sharp

Sharp UA-HD60E-L Manuel utilisateur

Sharp

Sharp IG-NX2E Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur

vollara

vollara Air & Surface Pro+ Manuel utilisateur