Sharp FP-A80M Manuel utilisateur

“Plasmacluster” and “Device of a cluster of grapes” are

trademarks of Sharp Corporation.

AIR PURIFIER

OPERATION MANUAL

FP-A80M

* The number in this technology mark indicates an

approximate number of ions supplied into air of

1 cm3, which is measured around the center of a

room applicable floor area (at 1.2 m height above

the floor) when the product is placed close to a

wall at the MED mode setting.

FP-A80M.indd 1FP-A80M.indd 1 2022/03/01 11:24:412022/03/01 11:24:41

Please read before operating your new Air Puri er

Some odor ingredients absorbed by the  lters may become separated and may be

discharged through the air outlet and result in additional odor. Depending on the

usage environment, especially when the product is used in a condition signi cantly

more severe than household use, this odor may become strong in a shorter period

than expected.

The air puri er is designed to remove air-suspended dust and odor, but not harm-

ful gases (for example, carbon monoxide contained in cigarette smoke). If the odor

sources still exist, it cannot completely remove the odor (for example, odors from

construction materials and pet odors).

It is suggested to open the window a bit when you are smoking in order to facilitate

ventilation.

In this case we recommend purchasing the optional replacement.

HEPA  lter (white)

Deodorizing Pre  lter (black)

Dust

pollen, dust, particles of cigarette

smoke, pet dander

Odor

cigarette smoke odor,household odor

FP-A80M.indd 2FP-A80M.indd 2 2022/03/01 11:24:432022/03/01 11:24:43

FEATURES

Exclusive Combination of Air Treatment

Technologies

Filtration System + Plasmacluster Ion

DECREASES ODORS

Deodorizing Pre lter absorbs many com-

mon household odors.

REDUCES DUST, POLLEN, DANDER &

MOLD*

HEPA filter traps 99.97% of particles as

small as 0.3 microns.*

REFRESHES

Plasmacluster refreshes the air similar to

the way nature cleans the environment by

emitting a balance of positive and negative

ions.

*From that air is drawn through the filter

system.

Room size : 62m2

Thank you for purchasing the SHARP Air Pu-

rier. Please read this manual carefully. Be-

fore using this product, be sure to read the

section: “Important Safety Instructions.”

After reading this manual, keep it in a conven-

ient location for future reference.

For your reference, we recommend to keep

this manual in the place where you can read

at any time.

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

........ 2

PART NAMES .............................................. 4

FILTER INSTALLATION .............................. 6

OPERATION ................................................ 7

MAINTENANCE........................................... 8

TROUBLESHOOTING............................... 10

SPECIFICATIONS.......................................11

FP-A80M.indd 1FP-A80M.indd 1 2022/03/01 11:24:432022/03/01 11:24:43

IMPORTANT SAFETY INSTRUCTIONS

Always follow basic safety

precautions when using electrical

appliances, including the following:

WARNING

– Always observe the following to

reduce the risk of electrical shock, fire,

or injury:

• Read all instructions before using the

product.

• Use only a 220-240 volt outlet.

• This appliance is not intended for

use by persons (including children)

with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision

or instruction concerning use

of the appliance by a person

responsible for their safety.

Children should be supervised to

ensure they do not play with the

appliance.

• If the power cord is damaged,

it must be replaced by the

manufacturer, its service agent, a

Sharp authorized Service Center

or similarly qualified persons in

order to avoid a hazard. Contact

the nearest Service Center for any

problems, adjustments, or repairs.

• Do not repair or disassemble the

product yourself.

• Be sure to remove the power plug

before performing maintenance,

when removing and attaching and

replacing the filter and when not

using for a long time. Failure to

do so can cause a short circuit

resulting in electrical shock or fire.

• Do not use the product if the power

cord or plug is damaged or if the

connection to the wall outlet is loose.

• Periodically remove dust from the

plug.

• Do not insert fingers or foreign objects

into the Air Inlet or Air Outlet.

• When removing the power plug,

always hold the plug and never pull

on the cord.

Failure to do so can cause a short

circuit resulting in electrical shock or

fire.

• Be careful not to damage the power

cord.

Failure to do so can cause electric

shock, heat generation, or fire.

• Do not remove the plug when your

hands are wet.

• Do not use this product near gas

appliances or fireplaces. When

the product is operated with gas

appliances in same room, Ventilate

a room periodically, otherwise it may

cause Carbon monoxide poisoning.

• Do not operate the product in rooms

where aerosol insecticides are

present. Do not operate the product

in rooms where there is oily residue,

incense, sparks from lit cigarettes, or

chemical fumes in the air.

• Keep the product away from water.

Do not operate the product in places

where it may get wet, such as a

bathroom.

• Do not expose the product to water.

Doing so can cause a short circuit or

electrical shock.

• Be cautions when cleaning the

product.

Strong corrosive cleansers can

damage the exterior.

NOTE

– What to do if the product interferes

with radio or TV reception –

If the air purifier interferes with radio or

FP-A80M.indd 2FP-A80M.indd 2 2022/03/01 11:24:432022/03/01 11:24:43

television reception, try one or more of

the following measures:

• Adjust or reposition the receiving

antenna.

• Increase the distance between the

product and the radio or TV.

• Connect the equipment into an outlet

on a circuit different from that of the

radio or TV receiver.

• Consult the dealer or a qualified radio

or TV technician.

CAUTIONS CONCERNING

OPERATION

• Do not block the Air Inlet or Air Outlet.

• Do not place the product near or

on hot objects, such as stoves or

heaters, or where it may come into

contact with steam.

• Always operate the product in an

upright position.

• Do not move the product when it is in

operation.

• When moving the product, use the

handles on both sides.

• If the product is on easily damaged

flooring, an uneven surface, or thick-

piled carpet, lift it up when moving.

• Do not operate the product without

the filters properly installed.

• Do not wash and reuse the HEPA filter

and the Deodorizing Pre filter. Doing

so will not improve filter performance

and can also cause electric shock or

operating malfunctions.

• Clean the exterior with a soft cloth

only. Do not use volatile fluids or

detergents. The product surface may

be damaged or cracked with Benzine

paint thinner or polishing powder. In

addition, the sensors may malfunction

as a result.

• Do not scrub the Back Panel hard

during its maintenance.

INSTALLATION

GUIDELINES

• Avoid locations where the sensors

are exposed to direct wind. Doing so

can cause the product to malfunction.

• Avoid locations where furniture,

fabrics, or other objects can come in

contact with the product and interfere

with the inlet and outlet of air.

• Avoid locations where the product is

exposed to condensation or drastic

changes in temperature. Appropriate

room temperature is between 0 – 35

ºC.

• Place the product on a level and

stable surface with sufficient air

circulation. When placed on heavy

carpet, the product may vibrate

slightly.

• Avoid locations that generate grease

or oily smoke. Doing so can cause

the product exterior to crack and the

sensors to malfunction.

• The dust collecting ability of the

product is effective even when the

product is as close to 3 cm from

the wall, the surrounding walls and

floor may get dirty. Please place the

product at a distance from the wall.

The wall directly behind the Air Outlet

may become dirty over time. When

using the product for an extended

period of time at the same location,

periodically clean the walls adjacent

to it.

FILTER GUIDELINES

• Follow the instructions in this manual

for proper filter care and maintenance.

FP-A80M.indd 3FP-A80M.indd 3 2022/03/01 11:24:432022/03/01 11:24:43

PART NAMES

ILLUSTRATIVE DIAGRAM

INCLUDED

• Operation manual

BACK

1 Air Outlet

2 Air Inlet

3 Handle

4 Main Unit

5 HEPA Filter

6 Deodorizing Pre Filter

7 Dust Sensor

8 Date Label

9Power Cord

10 Plug

FP-A80M.indd 4FP-A80M.indd 4 2022/03/01 11:24:452022/03/01 11:24:45

MAIN UNIT DISPLAY

11 12 14 15 16 17 18

11 SHOWER Button /

SHOWER Indicator Light (green)

12 Plasmacluster ON / OFF Button /

Plasmacluster ON / OFF Indicator Light (green)

13 CHILD LOCK Button / CHILD LOCK Indicator Light (green)

14 CLEAN SIGN

The color changes according to the air condition.

15 Plasmacluster Sign (blue)

16 FAN SPEED Indicator Light (green)

17 FAN SPEED Button

18 POWER Button

Green Yellow Red

Clean Very Impure

FP-A80M.indd 5FP-A80M.indd 5 2022/03/01 11:24:462022/03/01 11:24:46

FILTER INSTALLATION

Unplug the electrical cord before

performing any maintenance.

To maintain the quality of the  lters, they are packed in plastic bags and installed in the

main unit. Be sure to remove the  lters from the plastic bags before using the unit.

Remove the front Panel.

Gently grip the bottom of the front panel

and remove it by pulling the bottom gently

towards you.

Remove the plastic bags.

Place the  lters accordingly.

Keep the order of  lters.

Fix the Front Panel.

Fix the Front Panel by hooking it into

the top of the unit. Swing panel in by

pushing gently until the panel snaps

into place.

Record the date when you

start or replace the  lters.

HEPA  lter (white)

Deodorizing Pre  lter (black)

Starting date of use

Replacement Filters

Replace the filters when they are no

longer removing odor or dust.

FP-A80M.indd 6FP-A80M.indd 6 2022/03/01 11:24:512022/03/01 11:24:51

OPERATION

Press to start / stop.

Unless the power cord has been unplugged,

the operation starts in the previous mode it

was operated in.

Press to select fan speed.

Press to turn Plasmacluster

Ion Mode ON and OFF.

Press to start SHOWER Mode..

The unit will operate at HIGH fan speed for

one hour, then will return to the prior opera-

tion.

"SHOWER" mode is effective when you

would like to clean quickly.

The Dust Sensor automatically moni-

tors dust pollution level and adjusts

fan speed accordingly.

Yellow Red

Clean Very Impure

ON OFF

SHOWER Operation

Light Control

Press for 3 seconds to se-

lect ON/OFF of the Plusmaclus-

ter SIGN and the CLEAN SIGN.

AUTO mode

*The air purier operates the airow speed

automatically according to the interior

pollution level detected by the sensor.

CHILD LOCK

Press for 3 seconds to select

CHILD LOCK.

Operation of the unit display will be

locked. It is the same method as start-

ing operation.

To cancel the CHILD LOCK mode,

press again for 3 seconds.

CLEAN SIGN

Green

3 2 1

FP-A80M.indd 7FP-A80M.indd 7 2022/03/01 11:24:562022/03/01 11:24:56

CLEANING THE FILTERS

Turn o󰀨 the unit, and unplug the

power cord.

Remove the Front Panel.

(Refer to page 6)

Clean the lter and Dust sensor.

Gently remove dust from the lter, using a

vacuum cleaner with attachment or similar tool.

Dust Sensor

Remove the Sensor cover, and remove the

dust on the Sensor lter.

If it is very dirty, wash it with water and dry it

thoroughly.

CLEANING THE UNIT

Dust sensor

Deodorizing Pre lter

Sensor cover

Sensor lter

MAINTENANCE

Wipe with a dry, soft cloth.

For stubborn stains or dirt, use a soft cloth

dampened with warm water.

Do not use volatile uids and deter-

gents.

Benzene, paint thinner, polishing powder,

detergent ingredients etc., may damage

the unit.

Care Cycle :

Whenever dust accumulates on the unit or every 1 month.

FP-A80M.indd 8FP-A80M.indd 8 2022/03/01 11:24:582022/03/01 11:24:58

Table des matières

Autres manuels Sharp Purificateur d'air

Sharp

Sharp FX-S120B Manuel utilisateur

Sharp

Sharp Plasmacluster IG-A10EU Manuel utilisateur

Sharp

Sharp UA-PF40E Manuel utilisateur

Sharp

Sharp Plasmacluster FP-A40C Manuel utilisateur

Sharp

Sharp Plasmacluster FP-P30U Manuel utilisateur

Sharp

Sharp FU-A80A Manuel utilisateur

Sharp

Sharp FP-FM40Y Manuel utilisateur

Sharp

Sharp Plasmacluster IG-CH2J Manuel utilisateur

Sharp

Sharp Plasmacluster FP-N60CX Manuel utilisateur

Sharp

Sharp FZ-28SEF Manuel utilisateur

Sharp

Sharp FP-F50U-W Manuel utilisateur

Sharp

Sharp FP-FM40E Manuel utilisateur

Sharp

Sharp UA-KIN50E-W Manuel utilisateur

Sharp

Sharp FU-W28E Manuel utilisateur

Sharp

Sharp FP-F30E Manuel utilisateur

Sharp

Sharp KC-A60TA Manuel utilisateur

Sharp

Sharp FU-S63E Manuel utilisateur

Sharp

Sharp IZCA10EKW Manuel de la liste des pièces

Sharp

Sharp Plasmacluster KC-30TX1 Manuel utilisateur

Sharp

Sharp FXJ80UW Manuel utilisateur

Sharp

Sharp FP-J30J Manuel utilisateur

Sharp

Sharp FU-NC01 Manuel utilisateur

Sharp

Sharp FP-N40CX - Plasmacluster Ion Air Purifier Manuel utilisateur

Sharp

Sharp FU-A28TA Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur

vollara

vollara Air & Surface Pro+ Manuel utilisateur