INDICATOR “ON-LINE”
l ON LINE (STANDBY PRINTING.)
l LAMP OFF( NOT TO PRINT).
l LED FLASHING, WHEN NO PAPER
2-3. SELF TEST
The self –test mode checks the printers control circuit function, setting parameter,
software version, and printer quality.
① Before running the self -test, make sure there is sufficient paper.
② On pressing FEED S/W(SE7300) , and power ON, starting the self-test.
③ Printer becomes ready to receive data from the host.
2-5. DUMP MODE
Dump mode checks whether printer receives data correctly from the host
or not.
① Before running the self -test, make sure there is sufficient paper.
② On pressing FEED S/W(SE7300), and power ON, starting the self-test.
③ After ending the self-test, continually press FEED S/W (SE7300), Then
print “**[ HEX DUMP PRINT START ]**”
after 2 seconds.
④ Thought you don’t touch any s/w, the printer take out HEXA mode
changed data from host
⑤ If power off, printer “s recovered to normal mode
6
3. CONNECTIONS
3-1. Serial interface
1) Serial(RS-232C)
l Handshaking이 XON/XOFF 시 DSR/DTR Line is not avalable.
l On no paper , 0x07 has send on 2 times 2, and 0x11(XON) has
send on refreshing paper.
