USER’S MANUAL
INSTRUCTIONS
HORIZONTAL LEVELING MODE
Press the on key to turn on the instrument.
The level will automatically self-level.
The level has a range of self-levelling of 5 degrees.
Activate the alarm key.
Once self-levelled the level will start to rotate.
SLOPE MODE
The FRE207 level allows you to work with slope values of up to 8% for axes x and y. Once
the level is self-levelled in horizontal mode, press the G key.
The key to enter the value for x will start to blink.
Use the keys + (more) or – (less) to enter the slope. In the direction x press the key x/y to
introduce the value in y.
Use the keys + (more) or – (less) to enter the slope in y.
Press the x/y key again to confirm the slope data introduced.
After a few seconds, the level will search for the values introduced.
VERTICAL LINES MODE
Once the instrument is positioned in horizontal mode, it will automatically level itself. It
will project two plumb points and a vertical line.
OTHER FUNCTIONS
SCANNING MODE
This mode is used mainly for interior jobs. The beam is centred on a specific area. The beam
projects a line that works with the options of 10º, 45º , 90º y 180º.
REMOTE CONTROL
The remote control allows you to work via radio at a distance of 80 metres. The keys that
the remote control has have the same functions as the details on the display. To make it
easier it is better to use the remote control to avoid moving the keyboard.
importAnt: do not chArge AlKAline bAtteries As this could cAuse serious dAmAge to the instrument