Sepson H100P Manuel utilisateur
Jan-07
H100P
Type No 73.09-010
Grooved for 16 mm rope Type No 73.09-014
10 TONNES WINCH
Metric std. US std.
(approx.)
Pulling force
- bottom rope layer 10.0 tonnes 22 500 Lbs
- top rope layer 7.0 tonnes 15 700 Lbs
Rope speed
- bottom rope layer 9.0 m/min 30 ft/min
- top rope layer 13.0 m/min 43 ft/min
Rope speed in high auto 2-speed
- bottom rope layer n/a n/a
- top rope layer n/a n/a
Max oil pressure 210 bar 3000 psi
Max oil flow 60 l/min 16 gal/min
Drum diameter 216 mm 8.50 inch
Rope diameter 16 mm 0.63 inch
(Acc. to DIN 14584, MBL ≥197 kN)
Rope length 60 m 197 ft
Numbers of layers 4 4
Winch weight 175 kg 393 Lbs
Rope weight 66 kg 148 Lbs
Dimensional drawing (dimensions in mm)
May 2006
H100P
Pulling force over the rope length
Pulling
force
(tonnes) Rope speed
(m/min)
Total Rope
on the
drum (m)
1st 10,0 9,0 13,0
2nd 8,8 10,5 27,8
3rd 7,8 11,5 44,4
4th 7,0 13,0 62,8
Mounting instructions
The winch should be mounted on a 16 mm
steel mounting plate fixed to the vehicle.
The winch must be fitted to the mounting
plate with 8 bolts M6S M16x40 (hot
galvanized) minimum quality 8.8.
Tightening torque 210 Nm (21 kpm) when
oiled.
Hydraulic installation
Declaration of Conformity
According to the Machine Directive 98/37/EC, Annex IIA
Sepson AB, P.O. Box 172, SE-780 50 Vansbro, Sweden declare under our sole responsibility that:
The winch type 73.09 with serial numbers 110-770
- are manufactured according to the Machine Directive 98/37/EC
-are manufactured according to following harmonized standards – EN 292-1 and 2
Vansbro December 9, 2005. Sepson AB Ulf Jons Designer
6,0
6,5
7,0
7,5
8,0
8,5
9,0
9,5
10,0
10,5
11,0
0,0 10,0 20,0 30,0 40,0 50,0 60,
0
Total rope on the drum in metres
Pulling force in tonnes
Autres manuels Sepson Treuil
