Sentry360 IS-DM520 Manuel utilisateur

©Sentry360 2014

IS-DM520, HB

User Manual

Ver 1.0

Table of Contents

1. Overview............................................................................................................................ 3

1.1 Features ...................................................................................................................... 3

1.2 Package Contents........................................................................................................ 4

1.3 Dimensions.................................................................................................................. 5

1.4 Connectors .................................................................................................................. 6

2. Camera Cabling................................................................................................................. 7

2.1 Connect Power............................................................................................................ 7

2.2 Connect Ethernet Cable............................................................................................... 7

2.3 Connect Alarm I/O ....................................................................................................... 7

3. System Requirements ...................................................................................................... 8

4. Access Camera ................................................................................................................. 9

5. Configure Video Streams ................................................................................................13

6. Configuration Files Export / Import ................................................................................14

Appendix A: Delete the Existing DC Viewer..........................................................................15

Appendix B: Setup Internet Security.....................................................................................16

1. Overview

The IS-DM520 camera is a Quad-streaming, H.264 & MJPEG encoding, 5.0 Megapixel

resolution, IP-addressable, network camera. It is designed to deliver full-motion, high-definition,

progressive scan digital video across local area networks. The IS-DM520 features a design with

a 1/2.5” CMOS sensor, Power over Ethernet, 24 IR LED, heater/blower (HB model only), and

Audio-In and Audio-Out. The IS-DM520 is a cost-effective, high-level, megapixel network

camera.

1.1 Features

•Progressive Scan CMOS Sensor

•Quad Streams Compression: H.264 Baseline / Main / High Profile + MJPEG

•Multi-language Support

•Tampering Alarm

•Remote Zoom & Focus (Motorized Lens)

•Wide Dynamic Range

•Motion Detection

•Privacy Masks

•Smart Picture Quality / 3D Noise Reduction

•Vertical View Mode (Image rotation by 90 degrees)

•Smart IR Mode

•Network Failure Detection

•Day/Night (ICR)

•IR LED Module (IR and HB models, working distance up to 25m)

•Micro SD support

•BNC analog output

•Weatherproof (IP66 International)

•ONVIF Support

1.2 Package Contents

Please check the package contains the following items listed below.

Camera

DC Jack Cable & Power Terminal Block

Rubber Washers (×6)

Security Torx

Self Tapping Screws

(×4)

Plastic Screw Anchors

(×4)

Quick Guide

NOTE: The type of the supplied self-tapping screws is mainly for softer

substrate/material installation such as wood. For other installation environment such as

cement wall, it is required to pre-drill and use plastic anchors before fastening the

supplied self-tapping screw on the wall.

1.3 Dimensions

The IS-DM520 dimensions are shown below.

Top View Side View

1.4 Connectors

The diagram below shows the IS-DM520 reset button and various connectors. Definition for

each connector will be given as follows.

No.

Connector

Definition

Remarks

Reset Button

Restore to factory default

BNC

Analog Video Output

3 Alarm I/O

GND (Input

－

)

Alarm connection

Input

＋

Output

－

Output

＋

4 Audio I/O

Output (L)

Two-way audio transmission

Output (R)

GND

Input

5 Power

DC 12V

Power

Power connection

Reserved

GND

AC 24V

Power-1

Earth GND

Power-2

RJ-45

10/100 Mbps Ethernet / PoE

2. Camera Cabling

Please follow the instructions below to complete the IS-DM520 connection.

2.1 Connect Power

Please refer to SECTION:CONNECTORS. Alternatively, connect the Ethernet cable to the

camera’s PoE port and plug the other end of the cable into a PoE switch.

NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in use in the

network.

2.2 Connect Ethernet Cable

Use of Category 5 Ethernet cable is recommended for network connection; to have best

transmission quality, cable length shall not exceed 100 meters. Connect one end of the

Ethernet cable to the RJ-45 connector of the IS-DM520, and the other end of the cable to the

network switch or PC.

NOTE: In some cases, you may need use an Ethernet crossover cable when connecting

the IS-DM520 directly to the PC.

Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit, please

check LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

2.3 Connect Alarm I/O

The camera equips one alarm input and one relay output for alarm application. Refer to alarm

pin definition below to connect alarm devices to the IS-DM520 if needed.

PIN 1: GND (Input-)

PIN 2: Input+

PIN 3: Output-

PIN 4: Output+

3. System Requirements

To access the IS-DM520 via web browser, please ensure your PC has a good network

connection, and meets system requirements as described below.

Items

System Requirement

Personal Computer

1. Intel®Pentium®M, 2.16 GHz or

Intel®CoreTM 2 Duo, 2.0 GHz

2. 2 GB RAM or more

Operating System

Windows VISTA/ Windows XP/ Windows 7

Web Browser

Microsoft Internet Explorer 6.0 or later

Firefox

Chrome

Safari

Network Card

10Base-T (10 Mbps) or 100Base-TX (100 Mbps)

operation

Viewer

ActiveX control plug-in for Microsoft IE

4. Access Camera

Step 1. Power your camera using the correct power source (PoE switch, PoE injector, or

12V adapter).

Step 2. Download, install, and run sentryView™, Sentry360’s camera configuration tool,

here: http://sentry360.com/product/sentryview/

Step 3. Click the Scan button in sentryView™ to scan your network for connected cameras.

Step 4. To automatically configure your camera network settings, check the boxes of the

cameras you want to configure. Then click Auto Configure.

Step 5. Confirm your network settings and click Configure.

Step 6. To manually configure your cameras, click Edit Camera Values at the bottom right,

enter your IP Address, Subnet Mask, Gateway, and DHCP settings. Click Apply to

save these values.

Step 7. Your cameras are now configured. If you are using sentryCore™ as your Video

Management System, please download the latest version here:

http://sentry360.com/product/sentrycore/

Step 8. Right click on a camera and select Browse. The prompt for entering the default

username and password will appear for logging in to the IS-DM520.

Table des matières

Autres manuels Sentry360 Caméra de sécurité

Sentry360

Sentry360 FS-IP5000 Manuel utilisateur

Sentry360

Sentry360 IS-BL800 Manuel utilisateur

Sentry360

Sentry360 IS-DM260 Manuel utilisateur

Sentry360

Sentry360 FS-IP10K Manuel utilisateur

Sentry360

Sentry360 IS-IP200-IRB Manuel utilisateur

Sentry360

Sentry360 IS-IP10K Manuel utilisateur

Sentry360

Sentry360 FS-IP6360-V Manuel utilisateur

Sentry360

Sentry360 IS-IP200-DN Manuel utilisateur

Sentry360

Sentry360 IS-DM830 Manuel utilisateur

Sentry360

Sentry360 FS-IP8180 Manuel utilisateur

Sentry360

Sentry360 FS-IP12360-V Manuel utilisateur

Sentry360

Sentry360 IS-DM200 Manuel utilisateur

Sentry360

Sentry360 IS-IP14K Manuel utilisateur

Sentry360

Sentry360 IS-IP200-IRB Manuel utilisateur

Sentry360

Sentry360 FS-IP5000-M Manuel utilisateur

Sentry360

Sentry360 FS-IP3000-M Manuel utilisateur

Sentry360

Sentry360 FS-IP14K-DN Manuel utilisateur

Sentry360

Sentry360 FS-IP12180 Manuel utilisateur

Sentry360

Sentry360 FS-IP12180-V Manuel utilisateur

Sentry360

Sentry360 IS-IP200-IRB Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur