SensaTronics E Manuel utilisateur
a
r
t
e
t
d
S
g
n
i
t
t
e
G
The Model E Temperature Monitor is available with four or sixteen sensor ports
(E4/E16 models) and can be installed and running in minutes.
Designed with flanges for wall or rack mounting, the lightweight device measures a
compact 4.25” x 3.25” x 0.75” (10.8cm x 8.3cm x 3.49cm) and weighs about 0.35
pounds.
Step 1: Setting Up the Monitor
Connect ethernet
cable
Connect DB25 cable
Before you can use the Model E IT Temperature Monitor, you must either determine a static IP
address, network mask and gateway that is available on your network, or set the unit to DHCP
mode. The address received in DHCP mode can be determined by connecting to the RS232 serial
port. Note: DHCP address may change if a power outage occurs.
3.1 Configure the RS-232 ports
Start a terminal emulator program
such as HyperTerminal (included
with MS Windows). Set the RS-232
ports as shown. Note: If the settings
are incorrect, the
device will not be
able to communicate
with your terminal
emulator.
3.2 Utilizing the Main Menu
Use the main menu to select items for
setting the IP address, naming the device,
naming the probes, and setting the SNMP
parameters.
Pressing <enter> in the emulator will display
the main menu.
Step 3: Configuring the Monitor
Step 4: Completing the Configuration
Return to the main menu to ensure all settings take effect.
Disconnect the RS-232 cable. Connect the ethernet cable to your network hub or switch.
There will be a short pause before the Main Menu displays.
The Model E is only capable of accepting standard or heavy duty Sensatronics
temperature probes. Each probe requires 2 leads for proper operation.
Line up each probe with one
pair of terminal screws and
insert the wires.
Step 2: Connecting the Probes
Plug in the power
supply
1-800-633-1033
1 603-224-0167
http://support.sensatronics.com
2.2
2.1
1.1
1.3
1.2
Insert the probe wires into
the connector and tighten
the screws.
9600
8
None
1
None
Please contact Sensatronics Technical Support if you have any issues.
1-800-633-1033 http://support.sensatronics.com
Continued on reverse
Model E
IT Temperature Monitor
Quick Start Guide
20 A Dunklee Rd
Bow, NH 03304
USA
1-800-633-1033
1-603-224-0167
www.sensatronics.com
!Power Supply
!Configuration Cable
!Ethernet Cable
!Sensatronics Screwdriver
Package Contents
Model E Temperature Monitor
Sensatronics Probes
Probes from temperature to dry
contact to meet your specific needs or
configuration
Check out our other products
Intellipool Network
Monitor
Feature rich web-based monitoring
software for our products and the
entire network.
Software Compatability
All Sensatronics monitors are designed to be open source
friendly and thus can be utilized with a variety of software
applications that can poll via SNMP or XML interfacing. If you
require a software application, Sensatronics supports a number
of applications, and a full list can be found on our website:
www.sensatronics.com
We have a number of SNMP Mibs and configuration examples
available on our website: www.sensatronics.com
SNMP Support
Technical Support
Sensatronics offers free technical support for our monitors,
probes and Intellipool software. If you have any difficulties,
please do not hesitate to call or email us.
Phone: 1-800-633-1033
1-603-224-0167
Online: http://support.sensatronics.com
Step 5: Verify Network Settings
5.1 Open a web browser such as IE, Firefox or Safari
5.2 Enter the IP address of unit in browser address bar
A web page with current
readings should be
visible
5.3
5.4 You may now configure
any monitoring
software.
We offer a full line of temperature and environmental
monitoring products for any application. Our flexible
and scalable solution is appropriate for any size
organization seeking to implement an automated
monitoring solution.
Sensatronics Product Suite
Autres manuels SensaTronics Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur