SENS8 Light Cam Manuel utilisateur

Table of Contents

01 What’s in the box

02 Before you get started

03 How to set up

04 How to install

09 Status introduction

11 Limited warranty

13 Safety

What’s in the box

WX-19

-ø4.5

SENS8 Light Cam

Anchors Screws

Hole drilling template

cables

PIR sensor

Base

Light Sensor

Indicator Light

800-lumen

motion-sensing

light

1080p HD

camera w night

vision

IP65

weatherproof

body

Before you get started

Please check the following conditions for a

successful set–up:

Turn on your phone's Wi-Fi and make sure it's

connected to the same Wi-Fi network that you'll

connect your SENS8 to.

Select a 2.4 GHz Wi-Fi network and write down

the correct Wi-Fi password.

Place SENS8 Light Cam as close as to your

router.

Place the speaker of your smartphone close to

the front side of SENS8 Light Cam.

Keep the environment quiet and turn the media

volume to max on your smart phone so that

SENS8 can hear your phone.

How to set up

Step 1: Power the Camera

Plug the cable into the power port and then plug the

power adapter into an indoor power outlet. The

indicator light will turn on and turns blinking green

when it is ready to set up.

Step 2: Connect

Download SENS8 App from App Store or Google Play.

SENS8 app now supports iOS 9.0 or later version and

Android 6.0 or later version.

Open SENS8 App and follow the instructions to set up

your SENS8 Light Cam in the app.

SENS8 Light Cam is designed operate between

-20°C to 40°C. If it gets hotter or cooler, image

quality may be aﬀected.

Step 3: Choose a spot

Tips for choosing a good spot:

Avoid direct sunlight

Is a pole, plant or porch light

blocking the view? It might

throw oﬀ exposure or interfere

with night vision and lighting. If

you start noticing glare, adjust

the camera so that the horizon

is out of frame.

Consider the surroundings

Make sure that you choose a place within range of

your network. Thick or insulated walls can greatly

reduce the strength of your Wi-Fi signal, even if your

router is close by, so you should try streaming video

before you mount your camera.

Keep it in range of your router

Once you’ve added SENS8 Light Cam to your

account, unplug it and take it to the spot you’ve

chosen outdoors. Plug it into the outlet you want to

use and wait for the green light to turn on. SENS8

Light Cam will reconnect to your Wi-Fi network

automatically. This may take a minute or two.

Keep SENS8 Light Cam plugged in for the rest of the

installation.

0.3

0.6

2.3

3.3

2.6

1.3

1.6

Place it up high

But not too high. We ﬁnd that

2 to 3 meters above the

ground, tilted downwards, is

best-close enough to see

someone’s face and talk to

them through the camera. If

the power cable is not long

enough to reach the indoor

power outlet, you can use

the provided extended cable

to make it longer.

Step 4: Wall Mounting

Before you mount the camera, make sure it can get

Wi-Fi in the spot you’ve picked.

Hold your SENS8 Light Cam where you’d like to mount

it and check to make sure it’s streaming video to the

SENS8 app. If you don’t see video, the Wi-Fi may not

be strong enough there – you’ll need to ﬁnd a

diﬀerent spot or move your Wi-Fi router.

Take the hole drilling template included and then tape

it to the location you want to mount your camera.

Tools you may need:

Drill

Screwdriver

Hammer

Ladder

Drill bits

(3/32" for pilot holes, 7/32" for wall

anchors, 1/2" for cable hole)

WX-19

If the wall is made of a material like brick or stone,

you may need to use the wall anchors included to hold

the screws. Use a 3/32" bit to drill 3 holes through the

paper and wall for the plastic anchors. Then gently

hammer each anchor into the holes.

Attach the camera with mounting bracket to the wall

and secure the bracket with screws.

If you are mounting directly to wood or into a stud,

use a 1/16” bit to drill 3 pilot holes for the included

screws through the paper and wall.

If you want to route the cable through a wall, use a

1/2" bit to drill a hole for the cable connector.

Table des matières

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur