Sennheiser DW Pro 1 Manuel utilisateur
SL Headmic 1
Instruction manual
3
Safety instructions
Safety instructions
• Please read this instruction manual carefully and completely
before using the product.
• Make this instruction manual easily accessible to all users at all
times.
• Always include this instruction manual when passing the prod-
uct on to third parties.
• Liquid entering the housing of the product can cause a short-cir-
cuit and damage the electronics. Keep all liquids away from the
product.
• Do not expose the product to extreme temperatures.
• Use the product with care and store it in a clean, dust-free envi-
ronment.
• Only use attachments, accessories or spare parts specified by
Sennheiser.
Intended use
Intended use includes:
• having read these instructions, especially the chapter “Safety
instructions”,
• using the product within the operating conditions and limita-
tions described in this instruction manual.
• never opening the product. If products are opened by customers
in breach of this instruction, the warranty becomes null and
void.
“Improper use” means using the product other than as described
in these instructions, or under operating conditions which differ
from those described herein.
4
SL Headmic 1
SL Headmic 1
The SL Headmic 1 is a high-quality omni-directional condenser
headset microphone designed for professional “hands free” appli-
cations. Its adjustable neckband is visually unobtrusive and very
comfortable to wear. The SL Headmic 1 is available in black and
beige.
Features
• Individually adjustable to all head sizes
• Thin microphone boom, interchangeable
• Microphone boom can be attached to the left or right side
• Microphone boom is adjustable in length
• Modular overall system, i.e. all system components are easily
interchangeable
Package contents
•1SLHeadmic1
• 1 connection cable
• 1 MZC 2 frequency response cap
• 1 SL MZW 1 windshield
• 1 soft case
• 1 instruction manual
5
Putting into operation
Putting into operation
To connect the cable to the headset microphone:
왘Plug the connector into the socket.
왘Slide the silicone tube onto the
connector.
The microphone can be worn on the left or right side of the mouth.
If you do not want to change sides, continue on page 7.
Changing the microphone position (left/right)
The neckband has a total of five clips which are
designed so that the microphone boom can be
worn on either side of the mouth.
NOTICE Damage to the microphone boom
The microphone boom can break or be impaired in
its function when you bend or turn it. Also avoid fre-
quent alternate bendings close to the microphone
head as this can also damage the microphone boom
and possibly reduce the adjustability of the micro-
phone.
왘Only adjust the microphone boom as described in
this chapter.
6
Putting into operation
To remove the microphone boom:
왘First remove the microphone
boom from the two clips and
.
왘By turning the microphone
boom, remove it from the third
clip .
To reattach the microphone boom:
왘First attach the end of the
microphone boom where the
microphone head is fitted to
the clip on the desired side
of the neckband.
왘Press the microphone boom
into the two clips and .
90°
7
Putting into operation
Adjusting the microphone boom and the neckband
For best possible comfort and optimum fit of the headset micro-
phone, the neckband and the microphone boom have to be
adjusted to properly fit your head.
Positioning the microphone towards the corner of the mouth
To individually position the microphone:
왘Push the microphone boom in
backwards or forwards in the clips
so that the microphone is posi-
tioned 2 to 3 cm from the corner
of the mouth. The further away
the microphone is from the
mouth, the less treble is picked
up.
Adjusting the neckband
The neckband is adjustable in width
and ensures an optimum fit.
왘Change the length of the neck-
band by moving the ear hooks
until a snug but comfortable fit is
achieved.
NOTICE Damage to the microphone boom
The microphone boom can break or be impaired in
its function when you bend or turn it.
2–3 cm
8
Putting into operation
Using the frequency response caps
The MZC 2 frequency response cap allows you
to adjust the microphone’s sensitivity in the pres-
ence area. The MZC 2 gives a treble boost of 4 dB
(see “Frequency response curve” on page 15).
Use this cap if the microphone cannot be posi-
tioned close to the mouth, if the sound is too muf-
fled or if you want to increase the speech intelli-
gibility.
왘Slip the MZC 2 frequency response cap onto
the microphone until it locks into place with an
audible click.
An additional frequency response cap (MZC 1) is
available as accessory. The MZC 1 ensures a treble
boost of 2 dB.
왘Slip the MZC 1 frequency response cap onto
the microphone until it locks into place with an
audible click.
9
Putting into operation
Using the windshield
The SL MZW 1 windshield attenuates annoy-
ing wind noise by 10 dB.
왘Slip the SL MZW 1 windshield onto the
MZC 2 frequency response cap .
Attaching the connection cable to clothing
The MZQ 02 cable clip is available as accessory.
왘Press the tube of the connection cable into the
cable grip of the MZQ 02 cable clip.
왘Attach the cable clip to the rear of your collar.
왘Run the connection cable under your clothing.
10
Putting into operation
Connection cable with 3.5 mm jack plug
The cable is suitable for use with Sennheiser bodypack transmit-
ters with 3.5 mm jack socket. For wired applications, the headset
microphone can be used with the intelligent MZA 900 P phantom
power adapter.
왘Lock the jack plug for safe operation.
Autres manuels pour DW Pro 1
6
Table des matières
Autres manuels Sennheiser Microphone
Sennheiser
Sennheiser MD 421 II Manuel utilisateur
Sennheiser
Sennheiser e 609 silver Manuel utilisateur
Sennheiser
Sennheiser AD 1800 Manuel utilisateur
Sennheiser
Sennheiser MD 21 U - Manuel d'instructions
Sennheiser
Sennheiser e 609 silver Manuel utilisateur
Sennheiser
Sennheiser evolution e 904 Manuel utilisateur
Sennheiser
Sennheiser Evolution E914 Manuel utilisateur
Sennheiser
Sennheiser SKM 2000 Manuel utilisateur
Sennheiser
Sennheiser ME 36 Dimensions
Sennheiser
Sennheiser K6 Manuel utilisateur
Sennheiser
Sennheiser HSP 4 Manuel utilisateur
Sennheiser
Sennheiser MKH 416 Manuel utilisateur
Sennheiser
Sennheiser ME 34 Dimensions
Sennheiser
Sennheiser MD 441 Manuel utilisateur
Sennheiser
Sennheiser MD 46 Manuel d'instructions
Sennheiser
Sennheiser Evolution E 604 Manuel utilisateur
Sennheiser
Sennheiser MD 441 Manuel utilisateur
Sennheiser
Sennheiser MKH 8000 Series Manuel utilisateur
Sennheiser
Sennheiser MKH 20 Manuel utilisateur
Sennheiser
Sennheiser SKM 500 Manuel utilisateur
