Senix HTPX2-M Manuel utilisateur
20V MAX LITHIUM-ION
CORDLESS POLE HEDGE TRIMMER
Operator's manual
Model: HTPX2-M
HTPX2-M-0
For customer support, please call 1-800-261-3981 or send email to:
SAVE THIS MANUAL FOR FUTURE REFERENCE.
ORIGINAL INSTRUCTIONS
TM
EN - 2 WWW.SENIXTOOLS.COM
1
2
4
5
6
8
9
10
13
12
11
7
3
14
Locking Sleeve
Locking Base
Telescoping Ploe
Lock holes
Locking Base
Locking Sleeve
1
23
3 - ENWWW.SENIXTOOLS.COM
Bracket
Hook
Quick-Release Latch
Unlock Button
4
6
98
7
5
Safety Swicth
Switch Trigger
Telescoping Lock Clip
Telescoping Pole
EN - 4 WWW.SENIXTOOLS.COM
Telescoping
Lock Clip
Adjusting Bolt
Hex Key Tool
Telescoping
Lock Clip
Angle
Adjustment
Button
Light Button
10 11
13
15
12
14
5 - ENWWW.SENIXTOOLS.COM
Cutting Teeth Guard Teeth
16 17
19
18
EN - 6 WWW.SENIXTOOLS.COM
TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ...........................6
SAFETY INSTRUCTIONS...................................................7
KNOW YOUR UNIT............................................................21
SPECIFICATIONS*............................................................21
ASSEMBLY.........................................................................22
OPERATION.......................................................................22
MAINTENANCE..................................................................25
TROUBLESHOOTING.......................................................27
WARRANTY........................................................................28
SAFETY & INTERNATIONAL
SYMBOLS
Explanation of Safety & international symbols describes
safety and international symbols and pictographs that may
appear on this product. Read the operator’s manual for
complete safety, assembly, operating and maintenance and
repair information.
Caution / Warning.
To reduce the risk of injury, user must read
instruction manual.
Wear eye protectionn and safety helmet.
Wear hearing protection.
Wear protective gloves.
Wear safety footwear.
DANGER – Keep hands away from blade.
Do not use in rain or wet conditions.
Keep bystanders a safe distance away from
the work area.
Keep at least 33 ft (10 m) away from power
lines. Do not overreach. Keep proper footing
and balance at all times.
Do not dispose of battery packs in rivers or
immerse in water.
Do not dispose of battery packs in fire. They
will explode and cause injury.
Use and store the battery within an temperature
below 122°F(50°C).
Do not disassemble, crush, heat above
212°F(100°C); Never expose the battery to
microwaves or high pressures.
Indoor use only. Only use battery charger
indoors.
33ft
7 - ENWWW.SENIXTOOLS.COM
SAFETY INSTRUCTIONS
All Operators Must Read These
Instructions Before Use.
Always follow these safety
guidelines. Failure to do so may
result in serious bodily injury or
death.
DANGER!
This indicates a hazardous situation,
which, if not followed, will result in
serious injury or death.
WARNING!
This indicates a hazardous situation,
which, if not followed, could result in
serious injury or death.
CAUTION!
This indicates a hazardous situation,
which, if not followed, could result in
minor or moderate injury.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all instructions Failure to follow
all instructions listed below may
result in electric shock, re and/
or serious injury. The term power
tool in all of the warnings listed
below refers to your mains-operated
(corded) power tool or battery-
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work Area Safety
a) Keep work area clean and well lit
– Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such
as in the presence of ammable
liquids, gases or dust – Power
tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool – Distractions can cause
you to lose control.
2) Electrical Safety
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodied plugs
and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces, such
as pipes, radiators, ranges
and refrigerators – There is
an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to
rain or wet conditions – Water
entering a power tool will
increase the risk of electric
EN - 8 WWW.SENIXTOOLS.COM
the switch is in the off-position
before plugging in – Carrying
power tools with your nger on
the switch or plugging in power
tools that have the switch on
invites accidents.
d) Remove any adjusting key or
wrench before turning the power
tool on – A wrench or a key
left attached to a rotating part
of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times
– This enables better control of
the power tool in unexpected
situations.
f) Dress properly. Do not wear
loose clothing or jewelry. Keep
your hair, clothing and gloves
away from moving parts – Loose
clothes, jewelry or long hair can
be caught in moving parts.
g) If devices are provided for the
connection of dust extraction
and collection facilities, ensure
these are connected and
properly used – Use of dust
collection can reduce dust-
related hazards.
4) Power Tool Use + Care
a) Do not force the power tool. Use
the correct power tool for your
shock.
e) Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric
shock.
f) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use
of a cord suitable for outdoor
use reduces the risk of electric
shock.
3) Personal Safety
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the inuence
of drugs, alcohol or medication
– A moment of inattention while
operating power tools may result
in serious personal injury.
b) Use safety equipment. Always
wear eye protection – Safety
equipment such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection used
for appropriate conditions will
reduce personal injuries.
c) Avoid accidental starting. Ensure
9 - ENWWW.SENIXTOOLS.COM
application – The correct power
tool will do the job better and
safer at the rate for which it was
designed.
b) Do not use the power tool if
the switch does not turn it on
and off – Any power tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the battery pack
from the power tool before
making any adjustments,
changing accessories, or storing
power tools – Such preventive
safety measures reduce the
risk of starting the power tool
accidentally.
d) Store idle power tools out of the
reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool –
Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
If damaged, have the power
tool repaired before use – Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean – Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories
and tool bits etc., in accordance
with these instructions and in
the manner intended for the
particular type of power tool,
taking into account the working
conditions and the work to be
performed – Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by
a qualied repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
ADDITIONAL SAFETY RULES
FOR POLE HEDGE TRIMMER
a) Remove any blade that has
been damaged. Always make
sure that the blade is installed
correctly and securely fastened
before each use. Failure to do
so can cause serious injury.
b) Hold the pole hedge trimmer by
insulated gripping surfaces only,
EN - 10 WWW.SENIXTOOLS.COM
removed when clearing jammed
material. A moment of inattention
while operating the pole hedge
trimmer may result in serious
personal injury.
h) Carry the pole hedge trimmer by
the handle with the cutting blade
stopped. When transporting or
storing the pole hedge trimmer
always keep the blade covered.
Proper handling of the pole
hedge trimmer will reduce
possible personal injury from the
cutter blades.
i) Do not use the pole hedge
trimmer if the switch does not
turn it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
j) Use the pole hedge trimmer
and accessories in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power
tool for operations different from
intended use could lead to a
hazardous situation.
k) Do not overreach and keep the
balance at all times. Always be
sure of the footing on slopes.
Walk when operating the power
tool, never run.
because the cutter blade may
contact hidden wiring. Cutter
blades contacting a "live" wire
may electrify exposed metal
parts of the power tool and could
give the operator an electric
shock.
c) Maintain a rm grip on both
handle and pole while cutting
with the blade. Keep the blade
away from body.
d) Hold pole hedge trimmer
properly, e.g., with both hands.
Loss of control can cause
personal injury.
e) Check the hedge for foreign
objects before operation, e.g.,
center fences. Take care that the
cutting device does not come in
contact with wire or other metal
objects.
f) Service on the product must
be performed by qualied
repair personnel only. Service
or maintenance performed by
unqualied personnel could
result in injury to the user or
damage to the product.
g) Keep all parts of the body away
from the cutting blade. Do not
remove cut material or hold
material to be cut when blades
are moving. Make sure the
switch is off and the battery is
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Senix Tondeuse
Senix
Senix HTE3.8-L Manuel utilisateur
Senix
Senix HTX5-M Manuel utilisateur
Senix
Senix GTX2-M Manuel utilisateur
Senix
Senix GTC4QL-L Manuel utilisateur
Senix
Senix GTS4QL-M2 Manuel utilisateur
Senix
Senix GTSX5-M-0 Manuel utilisateur
Senix
Senix HT4QL-L Manuel utilisateur
Senix
Senix GTBCU4QL-M Manuel utilisateur
Senix
Senix HTX2-M Manuel utilisateur
Senix
Senix GTE2.5-L-EU Manuel utilisateur
