apart. There are no serviceable parts inside.
• To prevent product failure, the bulb should only be installed in operating
environments.
• Do not block any ventilation openings on the product.
• Never push any objects into the openings or slots on the product. Doing so may
create an electric shock or fire hazard.
• Maintain sufficient distance around your product for sufficient ventilation, do
not put anything within at least 6 inches of lightbulb socket.
• For best protection against lightning, unplug the product from its power source
during a storm.
• Only use accessories specifically recommended by the manufacturer.
• Refer all servicing to qualified SENGLED service technician.
• Servicing is required when the product:
1) has been damaged in any way;
2) liquid has been spilled on the product;
3) objects have fallen into the product;
4) the product has been exposed to rain or moisture,
5) the product does not operate normally, or has been dropped.
• Repairs must be performed by a qualified SENGLED technician.
• For bulb with a weight significantly higher than that of the bulbs for which they
are a replacement, the increased weight may reduce the mechanical stability of
certain luminaires and bulb holders and may impair contact making and bulb
retention. Check that all sockets and bulb holders frequently and make sure they
are secure and stable.
• The bulb can be hot and should not be touched without taking care.
CAUTION: INDOOR OPERATIONS ARE ONLY ALLOWED
NOT FOR USE IN EMERGENCY LIGHTING.
BE SUITABLE FOR DAMP LOCATIONS.
ENSURE FIXTURE CAN SUPPORT ADDED WEIGHT OF BULB.
ATTENTION: L’UTILISATION EST AUTORISÉE UNIQUEMENT EN INTÉRIEUR.
NE PAS UTILISER COMME ÉCLAIRAGE D’URGENCE.
RISQUE DE CHOC ÉLECTRIQUE –UTILISER UNIQUEMENT DANS UN
ENDROIT SEC.
S’ASSURER QUE LE LUMINAIRE EST APTE À SUPPORTER LE
SUPPLÉMENT DE POIDS DE L’AMPOULE.
