Senfeng Laser SF200CL Manuel utilisateur
SF200CL
www.senfenglaser.com
1
Manual of laser cleaning machine
SF200CL
SF200CL
www.senfenglaser.com
2
1. Safety information
Thank you for choosing SENFENG handheld laser cleaner. This user manual provides
you with important safety, operation, maintenance and other considerations. Please
read this manual carefully before using this product. To ensure safe operation and the
best condition of the product, please follow the following notes and warnings.
1.1 Safety mark
May cause grievous bodily harm and even endanger life safety.
May cause general bodily harm or damage the products or
equipment.
1.2 Laser Safety Level
According to the European standard EN 60825-1, clause 9, the internal laser device of
the equipment belong to class 4 lasers. The product emits laser radiation with a
wavelength of 1064nm or 1080nm, and the average power emitted from the output
head is greater than 150W, which will cause harm to eyes and skin that directly or
indirectly exposed to such light intensity . Although invisible, the beam can cause
irreparable damage to the retina or cornea. Suitable and certified laser protective
glasses must be worn when the laser is in operation.
Be sure to wear laser safety glasses when operate the product. Laser
safety glasses have laser wavelength protection selectivity, so please
choose the laser safety glasses that meet the laser output band of the
product. When the laser cleaning machine is powered on, it is
forbidden to turn the laser output head to anyone, and forbidden the
laser output head to illuminate the surface of high anti-material (such
as copper, aluminum, mirror stainless steel and other surface highly
reflective materials).
1.3 Safety mark
SF200CL
www.senfenglaser.com
3
Figure 1:Laser mark Figure 2:Handle with care
1.4 Electrical safety
①Please ground the product through the PE wire in the power cord, ensure solid and
reliable grounding.
If the grounding is disconnected, the product casing will be charged,
causing personal injury to the operator.
②Ensure the ac voltage is normal.
Incorrect wiring or supply voltage will cause irreversible damage to
the laser generator.
2. Product description
Laser cleaning equipment is a new generation of high-tech surface cleaning product.
Easy to install, control and automate. The machine can work without chemical
reagents, media, dust, and water. Manual adjust focus, fit surface cleaning, high
cleanliness. It is suitable for removing resin, oil, stains, dirt, rust, coating, coating and
paint on the surface of objects.
2.1
Non-contact cleaning without damaging the part base.
Precision cleaning, accurate position, precise size selective cleaning.
No chemical cleaning solution is required, mo consumables, safe and
environmentally friendly.
Easy operation, automatic cleaning with hand or robot.
High cleaning efficiency, save time.
Stable laser cleaning system, and almost requires no maintenance.
SF200CL
www.senfenglaser.com
4
2.2 Shipbuilding industry ,Auto parts ,Rubber mold ,High-end machine tools,Tire
mold,tracks environmental protection industry,Other industry
2.3 The scope of the application
Laser paint removal Laser degreasing
Laser removal of oxide layer Laser cleaning screw
Before cleaning tire mold After cleaning tire mold
Laser derusting Laser weld-cleaning
SF200CL
www.senfenglaser.com
5
2.4 Advantage comparison
Sheet 1 Advantage comparison
Comparison
project
Laser cleaning
Chemical
cleaning
Mechanical
polishing
Dry ice
cleaning
Ultrasonic
cleaning
Cleaning
method
Laser,
non-contact
Chemical
cleaner,
contact
Mechanical /
sandpaper,
contact
Dry ice,
non-contact
Detergent,cont
act
Artifact
damage
no damage
damage
damage
no damage
no damage
Cleaning
efficiency
high
low
low
Medium
Medium
consumable
need
electricity
Chemical
cleaner
Sandpaper,
grinding
wheel, oil
stone, etc.
dry ice
Special
cleaning fluid
Cleaning
effect
Excellent,
high
cleanliness
General, not
uniform
General,not
uniform
Excellent,
not uniform
Excellent,
Small
clean range
Precision
cleaning
Precise and
controllable,
high precision
Uncontrollable
,poor accuracy
Uncontrollable
, accurate
Uncontrollable
,poor accuracy
Cannot specify
cleaning range
Safety /
environmental
protection
No pollution
Chemically
polluted
environment
polluted
environment
No pollution
No pollution
Manual
operation
Easy to
operate,
handheld or
automated
The process
flow is
complex and
requires high
requirements ,
Need to
pollution
protection
measures
Consume
manpower,
need to do
pollution
protection
measures
Easy to
operate,
handheld or
automated
Easy to
operate, but
need to
manually add
consumables
Cost
investment
High initial
investment, no
consumables,
Low initial
investment,
high cost of
High initial
investment,
low labor
Medium
investment for
the first time,
Low initial
investment,
medium cost
SF200CL
www.senfenglaser.com
6
low
maintenance
costs
consumables
costs
high cost of
consumables
of
consumables
2.5 Operating environment of laser cleaner
The basic operating environment of this product is as follows
Sheet 2 Basic operating environment of the equipment
content
parameter
Supply voltage
Single-phase 220V±10%, 50/60Hz AC
Machine power consumption
2500W (Include Water cooler)
Setting up the environment
Flat, no vibration, no impact
Working temperature
0℃～40℃
Working environment humidity
≤80%
2.6 Laser cleaning machine mechanical parameters
Sheet 3 Equipment mechanical parameters
content
parameter
Size
1100mm×700mm×1150mm
Weight
220Kg
Fiber length
Five meters(Ten meters can be customized)
Head weight
2.5Kg
Mobile mode
handheld
Scan width
10-80mm
2.7 Optical parameters of laser cleaner
Sheet 4 Equipment optical parameters
content
parameter
Average laser power
≥200 W
Output power instability
＜3%
Power regulation range
10-100(Gradient adjustable）
Focal spot diameter(mm)
0.08/0.06
SF200CL
www.senfenglaser.com
7
Center wavelength(nm)
1064
Repeat frequency（KHz）
10-50(Gradient adjustable）
Monopulse energy （mJ）
10.00
Peak power maximum（KW）
100
Spot diameter（mm）
6-7
Pulse strength（Watt/m2）
0.10
Cleaning efficiency（m3/h）
5
Focal length（mm）
210/160 replaceable
Auto focus
V
Cooling method
Water cooling
2.8 Laser cleaning head size chart
2.9 Laser cleaning machine size chart
SF200CL
www.senfenglaser.com
8
3. Laser cleaning machine installation and use
3.1 Operating steps
Step 1:Take out the power cable,connect the 220V/50Hz power supply,red to the live
wire,black to the neutral wire,yellow ground wire.
Step 2:Check the water level of the water tank.If the water level is too low,please add
pure water and then electrify;if the water level is normal,turn the open switch upwards,
and the whole machine is energized to check whether the water tank is working
normally. (Note:When adding water to the water tank, please open the exhaust port
first; when draining the sewage, please open the exhaust port first. If the working
environment temperature is below 5 ℃, the antifreeze can be added to the water tank.
After the machine is used,please empty the water; if the working environment
temperature is above 5 ℃, the water should be placed once every three months.)
picture3 picture4
Step 3: Button operation, as shown in Figure 5.
1) Reset the "Emergency Stop" button
SF200CL
www.senfenglaser.com
9
2) Turn the"power" key switch to the right,turn on the control system power, and
the green indicator light is on.
3) Press the "laser" button, the laser green button light is on
picture5
Step 4: Open the cabinet to turn on the laser, as shown in Figure 6.
1) check whether the "LASER" button is reset. If it is not reset, reset the "LASER"
button.Reset the "emergency stop" button;
2) turn the key switch of "POWER supply" to the right, and the green indicator light
of "POWER" is on
3) After the green light is on for 10 seconds, press the “LASER” button, the “LASER”
red indicator light is on; note that if the “ALARM” indicator is on, the laser is in the
alarm state, please shut down and contact Raycus.
picture6
Step 5: Open the case cover, remove the cleaning head, as shown in figure 7. Do not
turn the laser output in the direction of a person, laser output head is forbidden to
illuminate the surface of high reflective materials(such as copper, aluminum, mirror
stainless steel and so on surface strong reflection material).
SF200CL
www.senfenglaser.com
10
picture7
Step 6: Display screen control operation.
1）The boot page is shown in figure 8;
2) Enter the parameter setting page, Power
（%）
is percent power, Freq
（Khz）
is actual
frequency value, as shown in figure 9;
Picture 8 picture 9
3) Set the parameters, click the number with your finger to appear the number table,
then choose parameters, finally, click Enter to confirm the parameter selection.
Picture 10 picture 11
4) Click the “ ”button in the lower right corner of the parameter setting page,
and the parameter setting is completed; if you need to reset parameters, click
Table des matières
