Sena SMH5-FM Manuel utilisateur

User's Guide

www.senabluetooth.com

SMH5 FM

Bluetooth®Headset & Intercom with

built-in FM tuner for Scooters and

Motorcycles

English

SMH5-FM

Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice.

Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™,

SPH10H™, SR10™, SM10™, SMH5-FM™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used

without the express permission of Sena.

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other

trademarks and tradenames are those of their respective owners.

SMH5-FM

10.7 Intercom Reconnection

10.8 FM Radio

10.9 Stereo Music

10.10 Function Priority

10.11 Enabling/Disabling Voice Prompts (Factory Default: Enabled)

10.12 Reset to Factory Default Settings

10.13 Fault Reset

11. FIRMWARE UPGRADE

12. OPERATION QUICK REFERENCE

BATTERY INFORMATION

MAINTENANCE AND CARE

DISPOSAL

CERTIFICATION AND SAFETY APPROVALS

• FCC Compliance Statement

• FCC RF Exposure Statement

• FCC Caution

• CE Declaration of Conformity

• Industry Canada Statement

• Bluetooth License

WAIVER AND GENERAL RELEASE

• Two Year Limited Warranty

• Limitation of Liability

• Return for Full Refund

WARNING

1. INTRODUCTION

2. PACKAGE CONTENTS

3. INSTALLING THE SMH5-FM ON YOUR HELMET

4. POWERING ON/OFF AND CHARGING

4.1 Powering On

4.2 Powering Off

4.3 Charging

4.4 Low Battery Warning

5. CHECKING THE BATTERY LEVEL

5.1 LED Indicator

5.2 Voice Indicator

6. PAIRING THE SMH5-FM WITH BLUETOOTH DEVICES

6.1 Mobile Phone Pairing

6.2 Bluetooth MP3 Player Pairing

6.3 Bluetooth GPS Navigation Pairing

7. PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE

7.1 A2DP Stereo Music Only

7.2 HFP for Phone Call Only

8. PAIRING WITH OTHER SMH5-FM HEADSETS FOR INTERCOM CONVERSATION

9. PAIRING WITH OTHER SENA HEADSET MODELS FOR INTERCOM CONVERSATION

10. USING THE SMH5-FM

10.1 Volume Adjustment

10.2 Mobile Phone Call Making and Answering

10.3 Enabling/Disabling Voice Activated Phone Answering (Factory Default: Enabled)

10.4 Intercom Conversation

10.5 Intercom vs. Mobile Phone Call

10.6 Intercom Failure

CONTENTS

English

SMH5-FM

English

Thank you for choosing the Sena SMH5-FM, Bluetooth Stereo Headset

and Intercom for scooters and motorcycles. With the SMH5-FM, you

can call handsfree on your Bluetooth mobile phone, listen to stereo

music or voice instructions of GPS navigation by Bluetooth wirelessly,

and have intercom conversations in full duplex with a passenger or

other riders.

The SMH5-FM is compliant with the Bluetooth Specification 3.0

supporting the following profiles: Headset Profile, Hands-Free Profile

(HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video

Remote Control Profile (AVRCP). Please check with the manufacturers

of other devices to determine their compatibility with this headset.

Please read this user’s guide carefully before using the headset. Also

check www.senabluetooth.com for the latest version of the user’s

guide and additional information related to Sena Bluetooth products.

The SMH5-FM features:

•Bluetooth handsfree for Bluetooth mobile phones

•Bluetooth stereo headset for Bluetooth stereo devices such as MP3

players

•Bluetooth stereo headset for Bluetooth GPS navigations

•Bluetooth intercom up to 700 meters (760 yards)*

•Built-in FM radio tuner with station scan and save function

•Multi-pair Bluetooth intercom to pair with 3 other headsets

Firmware upgradeable

Key Specifications:

•Bluetooth 3.0

•Supporting profiles: Headset Profile, Hands-Free Profile (HFP),

Advanced Audio Distribution Profile (A2DP), Audio Video Remote

Control Profile (AVRCP)

* in open terrain

EnglishEnglish

1. INTRODUCTION

SMH5-FM

2. PACKAGE CONTENTS

• Headset Main Unit

Jog Dial

LED

•Charging LED

Phone Button

DC Power Charging & Firmware Upgrade Port

• Microphone

- Open-face Helmet Kit

• Clamp Unit

• Helmet Speakers

• Attachable Boom Microphone

• Velcro Pad for Boom Microphone

• Attachable Boom Microphone Holder

• Microphone Sponges

English

SMH5-FM

English

1. Loosen the two screws on the back plate of the clamp using the

enclosed Allen Wrench. Insert the back plate of the clamp unit

between the internal padding and external shell of the helmet, and

tighten the two screws.

English

3. INSTALLING THE SMH5-FM ON YOUR HELMET

Insert

• Wired Microphone

• Velcro Pads for Wired Microphone

- Full-face Helmet Kit

• USB Power & Data Cable

• Glued Surface Mounting Plate

• Velcro Pads for Speakers

• Speaker Pads

• Allen Wrench

SMH5-FM

2. Attach the headset main unit to the clamp. Insert the main unit in

the clamp until you feel the click that signals a secure attachment.

3. If you have any problem mounting the clamp unit on the helmet for

any reason, you may use the glued surface mounting plate which

can be attached to the external surface of the helmet.

• Locate a proper surface on the helmet to attach the unit, clean

the helmet surface location with a moistened towel, and allow to

dry thoroughly.

• Peel off the cover of the adhesive tape of the plate and attach the

unit on the proper surface of your helmet.

4. Place the helmet speakers along with the velcro pads, centered to

your ear, in the ear pockets of the helmet. If the helmet has deep

ear pockets, you can use the speaker pads to place the speakers

closer to your ears.

5. Attach the boom microphone included in the “Basic Kit” between

the internal padding and the external shell. The boom microphone

should be mounted on the inside surface of the external shell so

it is facing properly towards your mouth. Please make sure that

the microphone is located close to your mouth when you wear the

Note:

Sena recommends the clamp unit over the glued surface mounting plate.

Even though the glued surface mounting plate is provided for convenience,

Sena does not assume any responsibility for use of it. Users may have to

use the glued plate at their own risk and responsibility.

English

SMH5-FM

helmet. You can use the enclosed velcro pad and holder for the

boom microphone to ensure secure placement.

In the case of the wired microphone included in the “Full-face

Helmet Kit”, attach the enclosed velcro pad for wired microphone

to the inside of the chin guard for full-face helmets. Place the wired

microphone on the velcro pad and attach it to the connector of the

speaker cable.

English

6. When you use the boom microphone included in the “Basic Kit”,

please make sure that the fin side of the microphone is facing

outward; away from your lips. You can easily recognize it by

touching the fin with your fingers.

7. To remove the headset main unit from the clamp, please make sure

to pull out the speaker cable connector from the main unit first.

Then, remove the main unit from the clamp.

English

n

SMH5-FM

To power on and off the headset, you don’t need to press and hold

any button for several seconds. Just short press the Jog Dial and

the Phone Button simultaneously, and you will get quick on-and-off

convenience.

4.1 Powering On

Press the Jog Dial and the Phone Button at the same time for about

1 second to power on. The blue LED turns on and you will hear

ascending beeps.

4.2 Powering Off

Just short press the Jog Dial and the Phone Button simultaneously,

you don’t need to press and hold for a few seconds. The red LED

turns on for a while until it turns off completely and you will hear

descending beeps.

4.3 Charging

• To charge the SMH5-FM, use the USB Power Cable included in the

package by plugging into computer’s USB port or USB wall charger.

USB wall charger is not included in the package, but you can use

4. POWERING ON/OFF AND CHARGING

Note:

Insert the speaker cable connector into the main unit and push the

connector cover down to lock the connector in place.

English

SMH5-FM

any USB wall charger in the market.*

•The USB Power Cable is also used for firmware upgrade of the

SMH5-FM.

•You can use any of the standard Micro-USB cables which is

mostly adopted by smartphones and general Bluetooth headsets

manufacturers.

•The Charging LED beside the charging port turns on red while

charging, and turns to blue when the headset is fully charged. It

takes about 2.5 hours to be fully charged.

•You can use the SMH5-FM while charging. It is especially helpful

when you use a cigarette charger for a long road trip.

•A cigarette charger for the SMH5-FM is separately available as an

optional accessory but you can use any micro-USB car charger in

the market.

4.4 Low Battery Warning

When the battery is low, the blinking blue LED in stand-by mode turns

to red and you will hear mid-tone triple beeps and a voice prompt

saying “Low battery”.

*please contact Sena regarding locally approved agencies Sena accepts.

You can check the battery level in two different ways when the

headset is powering on.

5.1 LED Indicator

When the headset is powering on, the red LED flashes rapidly

indicating the battery level .

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

5.2 Voice Prompt Indicator

When you power on the headset, keep pressing the Jog Dial and

Phone Button simultaneously for about 3 seconds until you hear

three high tone beeps. Then you will hear a voice prompt indicating

the battery level. However, if you release the buttons as soon as the

headset turns on, you will not hear the voice prompt for the battery

level.

5. CHECKING THE BATTERY LEVEL

Autres manuels pour SMH5-FM

Table des matières

Autres manuels Sena casque

Sena

Sena BS Manuel utilisateur

Sena

Sena 3S Manuel utilisateur

Sena

Sena SRL Manuel utilisateur

Sena

Sena SPH10HD-FM-01 Manuel utilisateur

Sena

Sena SMART HJC 20B SP71 Manuel utilisateur

Sena

Sena 10U for Shoei J-Cruise Manuel utilisateur

Sena

Sena SMH5 MULTICOM Manuel utilisateur

Sena

Sena DWO6-PRO Manuel utilisateur

Sena

Sena SPH10H-FM Manuel utilisateur

Sena

Sena SPH10H Manuel utilisateur

Sena

Sena 3S Manuel utilisateur

Sena

Sena ACS 10 Manuel utilisateur

Sena

Sena SF1 Manuel utilisateur

Sena

Sena Snowtalk 2 Manuel utilisateur

Sena

Sena SMH10 Manuel utilisateur

Sena

Sena SMH10 Manuel utilisateur

Sena

Sena SMH10 Manuel utilisateur

Sena

Sena EXPAND Manuel utilisateur

Sena

Sena EXPAND Manuel utilisateur

Sena

Sena SPH10H-FM Manuel utilisateur

Sena

Sena SPH10H Manuel utilisateur

Sena

Sena 10U Manuel utilisateur

Sena

Sena Schuberth SC1 Manuel utilisateur

Sena

Sena 3S PLUS Manuel utilisateur

Manuels casque populaires d'autres marques

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur

Southwing

Southwing SA505 Manuel utilisateur