Seltron GWD1 Mode d’emploi

ENG

Wi-Fi communication module GWD1

Instructions for use

and setting of the module

Instructions for installation

VSEBINA

Introduction............................................................................................................................4

INSTRUCTIONS FOR USE AND SETTING OF THE MODULE

GWD1 module description.....................................................................................................5

SeltronHome platform description .........................................................................................6

Setup communication module GWD1 ...................................................................................6

Setup connection with the controller......................................................................................6

Download mobile appliaction Clausius..................................................................................7

Create an account in Clausius ..............................................................................................7

Connect GWD1 to a Wi-Fi network .......................................................................................9

Method A: Connect GWD1 to a Wi-Fi network with WPS button .................................9

Method B: Connect GWD1 to a Wi-Fi network with Clausius application ....................9

GWD1 connection with SeltronHome cloud service............................................................11

INSTRUCTIONS FOR INSTALLATION

GWD1 installation................................................................................................................12

GWD1 electrical connection ................................................................................................12

Supply voltage connection...................................................................................................13

Connection with a heating controller ...................................................................................13

TROUBLESHOOTING, TECHNICAL DATA, STATEMENTS

GWD1 factory reset.............................................................................................................14

Troubleshooting...................................................................................................................14

Technical data......................................................................................................................17

Declaration of conformity.....................................................................................................18

Disposal of old electrical and electronic equipment.............................................................18

Notes ..........................................................................................................................19

Introduction

Wi-Fi communication modules GWD1 are advanced microprocessor-driven devices.

They are made with digital and SMT technology, intended for remote access to Seltron

heating controllers with Clausius application.

Instructions for use and settings

1 - WPS button for automatic connection with a wireless Wi-Fi network.

2 - Registration key of the GWD1 device.

3 - Signal light for the indication of connection to a Wi-Fi network.

4 - Signal light for the indication of connection to a cloud service.

5 - Signal light for the indication of connection to a Seltron heating controller.

Meaning of signal lights:

INSTRUCTIONS FOR USE AND SETTING OF THE MODULE

GWD1 module description

- signal light lights up in orange - connection is not established

- signal light ashes orange - connecting

- signal light lights up in green - connection is established

Occasional fast orange ashing, while the signal light lights in green, indicates

communication, namely data transfer.

2 3 45

Instructions for use and settings

Upon connection to the controller, the signal light for the

controller starts to ash orange.

Once the connection to the controller is established, signal light

for the controller will light green.

SeltronHome platform description

Setup connection with the controller

Upon connection to the supply voltage (at rst start or after a

reset), the WPS button will light green and all signal lights will

light orange.

Communication module GWD1 is connected to the heating controller via a wire (BUS)

connection. The GWD1 connects in to the internet via the Wi-Fi router, through which it

communicates with the SeltronHome cloud services.

SeltronHome service is a link between the communication with the mobile app Clausius.

Clausius sends commands and data, obtained through SeltronHome services.

Before you start using the communication module GWD1 it is necessary:

- to mount the module on the wall,

- connect it to a Seltron controller,

- connect it to a supply voltage.

You can nd technical instructions on pages 12 and 13.

Electrical connection of the device must be carried out by a qualied installer or

authorized organization.

Setup communication module GWD1

Seltron

Controller

Communication

Gateway GWD1

BUS

Connection

Wi-Fi Router

SeltronHome

Cloud

Clausius

App

If a connection with the controller can't be established please visit

www.seltronhome.com and check if your controller is supported.

Instructions for use and settings

Download the Clausius mobile application

Mobile application Clausius is used for the heating management and the connection of

communication module GWD1 to the Internet.

The application can be used also on personal computers, laptops or unsupported smartphones

via a web browser. To register and login in to the application in a web browser you must visit

the web address https://clausius.seltronhome.com

For the devices with Android operating system you can nd

the application on Google Play. For the iOS devices you can

nd it on the App Store.

To nd the application, write »SeltronHome« or »Clausius«

into search engine eld on Google Play or App Store. Applica-

tion icon is illustrated on the right.

After the installation start the Clausius application.

You can install Clausius application on smart devices with Android operating system 4.4 or

higher and on iOS devices with operating system verison 7.1 or higher.

Create an account in Clausius

To use the application you must rst create the user account in

the SeltronHome service.

For the registration you can use a valid and active Facebook

or Google user account. In the registration procedure you will

enter your user name and password, which you use in these

services.

For the registration you can use also any other e-mail address

that you possess. In this case you will have to enter a pas-

sword, which you will use along with your e-mail address to

After the registration you will receive an e-mail with a web link,

trough which you will conrm your e-mail address.

In the case that the Google and Facebook login page doesn't

apear, check, if your web browser dosen't block the pop-up

windows.

Applicaton Icon

Choose an option »Create new acco-

unt« and ll out the data

Instructions for use and settings

1) Upon the rst logging into the application, on the welcome screen choose the option

»ADD YOUR NEW DEVICE AS OWNER«.

2) In the window for devices adding, enter the registration key of the GWD1 device and

select »CHECK«.

3) Application checks and conrms if the registration key is correct. You have to repeat the

process if you made a typing mistake.

4) In the window for building adding, you will enter the data for the building (apartment,

house, company, street,...) in which the GWD is installed and select »CONTINUE«.

Each GWD1 device has a unique registration key, which is printed on the front of the housing.

1) Tap the button »ADD YOUR

NEW DEVICE AS OWNER«

2) Enter your registration key of

the GWD1

3) The application noties

you about properly inserted

registration key

4) Fill out the data of your

building.

The application checks the sta-

tus of the GWD1 connection

If the GWD1 is ofine, on

pop-window choose option

»INSTRUCTIONS«

After successful registration, connect the

GWD1 into a wireless Wi-Fi network.

you can use the button WPS on the

wireless router and on GWD1;

you can use the application Seltron-

Home Clausius on the smart phone,

tablet PC or other PC;

You can connect the GWD1 to your home

Wi-Fi network in two ways:

Instructions for use and settings

Method A: Connect GWD1 to a Wi-Fi network with WPS button

If your Wi-Fi router is equipped with a WPS button (Wi-Fi Protected Setup), the wireless

Wi-Fi connection can been set up easy, via this button.

After a few seconds, the WPS button is switched off and a

wireless Wi-Fi connection starts establishing, which is indicated

by orange ashing Wi-Fi signal light .

On the GWD1 press the WPS button , which will start to

ash green. Within two minutes press the WPS button on your

Wi-Fi router as well

Once the wireless Wi-Fi connection to the Wi-Fi router is esta-

blished, the Wi-Fi signal light is lightning green.

The WPS button on the wireless router, can be found under different names and acronyms.

Some examples: QSS, QuickSetup, Push'n'Connect etc. If you don't nd the WPS button

on your wireless router, please check the instructions that came with your wireless router.

Connecting procedure

Method B: Connect GWD1 to a Wi-Fi network with Clausius application

At the rst start or after reset the GWD1 is congured as an access point (an open network).

This makes it possible for you to connect to GWD1 and complete its setup.

Among the available networks, nd and select the network

»GWD1-XX«. »XX« indicates the registration key's rst

two characters.

Your smart device or computer is now connected to the

GWD1.

Close the Wi-Fi settings, and return to the application

SeltronHome Clausius.

First leave the application and on your smart device

open the settings for Wi-Fi networks.

For the connection to GWD1 in the Wi-Fi set-

tings choose Wi-Fi Network GWD1-XXXXXX

Connect GWD1 to a Wi-Fi network

Instructions for use and settings

When the conguration is complete, the WPS button turns off,

ahd establishing of wireless Wi-Fi connections starts, which is

signaled with an orange ashing warning Wi-Fi light .

When the wireless connection is established with theWi-Fi rou-

ter, the signal Wi-Fi light lights green.

1. The application detects the

device

2. Choose your home Wi-Fi

network from the list

3. Enter the Wi-Fi password, if

your network is secured with a

password

4. The application noties you

about completed conguration

Connecting procedure:

1. The application detects the GWD1 device. Tap »CONTINUE«.

2. Listed Wi-Fi networks, which are withing the GWD1 range. Select your home Wi-Fi

network.

3. If the Wi-Fi network is secured with a password, you need to enter it to have the access

to the selected network.

4. The application noties you about completed conguration. Tap »CONTINUE«.

If the application after a few seconds doesn't detect the communication module GWD1, turn

off the mobile data on your mobile device.

If the desired wireless network is not listed, select »REFRESH« and wait a few moments.

GWD1 currently supports DHCP access.

If after completed conguration your mobile device or computer doesn't automatically establi-

sh an internet connection, manually switch back to your home wireless Wi-Fi network.

Condition of the signal lights on theGWD1 while connecting to Wi-Fi network

Table des matières

Autres manuels Seltron Routeur sans fil

Seltron

Seltron GWD2 Mode d’emploi

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur