Self-Sat MWR 4524 Manuel utilisateur
SELFSAT MWR 4524
4G / LTE & WiFi internet router set with up to 150 Mbps incl.
4G / 5G ready roof antenna
Installation and User Manual
2
3
Contents
1. General Information 4
1.1 Intended use 4
1.2 Safety instructions 5
2. Installation 6
2.1 Scope of supply 6
2.2 Optional accessories and spare parts available 7
2.3 Connections, signals and controls 9
2.4 Installation of external antenna 10
2.5 Installation of router 12
2.6 Connecting the external antenna with the router 13
2.7 Connecting the WiFi inside antenna with the router 14
3. Starting up 15
3.1 Connecting with the WiFi of the router 16
3.2 Accessing the user interface of the router 18
3.3 Connecting with a WiFi 24
3.4 Using a SIM card 27
3.5 Using a second SIM card or a foreign SIM card 30
3.6 Connecting devices to LAN by Ethernet cable 36
4. Tracking your motor home or caravan 36
5. Rebooting or resetting the router 36
5.1 Rebooting the router 36
5.2 Resetting the router to factory settings 37
6. Technical Specifications 38
7. Disposal information 39
8. Warranty and service 39
9. Conformity 39
4
1. General information
Thank you for selecting the SELFSAT MWR 4524 Internet Router Set.
Please carefully read this user guid before installing and starting up the
product. Follow the described steps when operating the user interface of your
internet router accordingly.
Keep this user guide at hand. The latest version of this user guide can be found
here www.selfsat-service.de. If the version there is newer than this one could
be seen when comparing the number of the version on the back of this user
manual with the one online.
On the back side of your router you will find a serial number and an IMEI
number. Please take a note of them here. If the router is installed in your
mobile home or caravan this helps if these information is required.
SERIAL: IMEI:
1.1 Intended use
This product is considered to be used in motor homes or caravans. It could also
be used in trucks, busses or on boats. It is intended to set up an internet
connection with a 2,4 GHz WiFi or with the 4G / LTE mobile network.
The body of a motor home or caravan shields radio signals from outside.
Therefore the SELFSAT MWR 4524 internet solution uses an external antenna
which could either receive WiFi signals or mobile network signals as well as a
GPS signal.
The router could be powered by 12 Volts or 24 Volts direct current (DC) or 230
Volts alternating current (AC).
The manufacturer assumes no liability for damage due to assembly or
operating errors.
5
1.2 Safety instructions
Please handle the product and its accessories with care and protect them from
moisture and dust.
The product and its accessories contain small parts. Make sure that small
children do not have access to it, so as not to swallow it or injure themselves on
it.
Mount the router only in places where sufficient heat dissipation or ventilation
can take place, since the product may heat up.
Do not make any modifications to the product and do not disassemble it. This
means that warranty claims are lost.
As this is an electronic device we ask that you always use electricity with care.
Only connect the product to power sources that meet the technical
requirements of the product.
Because the product connects to the Internet via wireless networks, the signal
availability of which may vary, the device must not be used if death, personal
injury, property damage, loss of data, or other losses have to be avoided.
Use only the accessories included in the scope of delivery or optional
accessories available from the manufacturer.
Observe the operating temperature information under technical specs.
6
2. Installation
2.1 Scope of supply
A) SELFSAT MWR 4524
B) EU 2-pin power supply 100 –240 Volts AC
C) 12 Volts DC car power supply
D) 2 SIM card adapters for Micro SIM or Nano SIM to Mini SIM incl. SIM
card removal tool
E) 1,5 m Ethernet cable
F) SELFSAT external antenna (see front page for picture)
G) Thread extension
H) WiFi interior antenna
I) Hook-and-loop self-adhesive dots for the WiFi interior antenna
J) Installation and user manual
A) SELFSAT MWR 4524 B) EU 2-pin power supply C) 12 Volts DC
100 –240 Volts AC car power supply
7
D) 2 SIM card adapters E) 1,5 m Ethernet cable
for Micro SIM or Nano
SIM to Mini SIM incl.
SIM tray removal tool
G) Thread extension H) WiFi interior antenna I) Hook-and-loop self-
adhesive dots for WiFi
interior antenna
2.2 Optional accessories and spare parts available:
- Roof mounting plate for external antenna (art. no. 13825)
- Roof cable entry gland (art. no. 13850)
- Roof mounting plate and cable entry gland for ext. antenna (art. no. 13853)
- Cable extension 1 m (art. no. 13826)
- Cable extension 2 m (art. no. 13827)
- Roof mounting plate, cable entry gland, cable extension 1 m (art. no. 13831)
- Roof mounting plate, cable entry gland, cable extension 2 m (art. no. 13832)
8
- 12 Volts DC car power supply (art. no. 13841)
- EU 2-pin power supply 100 –240 Volts AC (art. no. 13843)
- WiFi interior antenna (art. no. 13848)
- 1,5 m Ethernet cable (art. no. 13842)
- 2 SIM card adapters incl. SIM tray removal tool (art. no. 13846)
- Thread extension (art. no. 13830)
Roof mounting plate Roof cable entry gland
Cable extension 1 m Cable extension 2 m
9
2.3 Connections, signals and controls
Upside
Downside
Assignment power connector
10
2.4 Installation of external antenna
In principle, the assembly of the external antenna can be carried out by
yourself with a little manual skill and the right tools. However, if you do not
have sufficient knowledge, we recommend that you have the product installed
by a suitable specialist company (e.g. where you bought your motorhome or
caravan). Above all, this ensures that the antenna installation on the roof is
reliably sealed and that no water can penetrate into the mobile home or
caravan, for which Satco Europe GmbH assumes no liability.
The outdoor antenna is intended for roof mounting. It can be mounted directly
on the roof by placing it on a pre-drilled hole through which the antenna thread
and the antenna cables are routed directly inside. Alternatively, it can be
mounted on a roof mounting plate including a roof cable entry gland
(optionally available, SELFSAT article number 13853). When installing on the
roof mounting plate, please check whether you need an extension cable set for
the antenna, which is optionally available with a length of 1 m or 2 m (SELFSAT
item number 1 m: 13826; SELFSAT item number 2 m: 13827). The roof
mounting plate including roof cable entry gland is also available as a set with
the 1 m extension cable (SELFSAT item number: 13831) or as a set with the 2 m
extension cable (SELFSAT item number: 13832).
In the case of direct installation on the roof of the mobile home or caravan, we
ask that you consider the thickness of your roof. If it is installed on a metal roof
(e.g. van), the length of the thread on the external antenna is usually sufficient
to screw it from the inside. In this case, you must drill a 2.7 cm hole in the
metal roof in a suitable position (preferably directly above the spot where you
want to mount the router later, e.g. in an overhead storage cupboard) in order
to insert the thread of the external antenna and the antenna cable into the
interior of the mobile home or caravan.
Table des matières
Autres manuels Self-Sat Routeur sans fil
