SEH ONE Manuel utilisateur
printserver ONE
Quick Installation Guide
MHAB-QI-psONE
Version: 1.1 | 2020-12
Overview
This 'Quick Installation Guide' describes the hardware installation and initial
setup of the printserver ONE.
Table of contents 1.
Do you need assistance? Contact us!
Customers from the United States of America and Canada please contact the
North American support.
Überblick
Dieser 'Quick Installation Guide' beschreibt die Hardware-Installation und
Inbetriebnahme des printserver ONE.
Inhaltsverzeichnis 13.
Benötigen Sie Hilfe? Kontaktieren Sie uns!
Monday to Thursday
Friday 8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
+49 (0)521 94226-44
support@seh.de
www.seh-technology.com
Monday to Friday 9:00 a.m. to 5:00 p.m. (EST/EDT)
+1-610-943-3226
support@sehtechnology.com
www.seh-technology.com
Montag–Donnerstag
Freitag 8:00–16:45 Uhr
8:00–15:15Uhr
+49 (0)521 94226-44
support@seh.de
www.seh.de
Quick Installation Guide [en] 1
Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Type Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Finding the Print Server in the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Software Installation 'SEH Product Manager’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Finding the Print Server (Determining the IP Address) . . . . . . . . . . . . . . . . . . . . .8
Changing the IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Printing via the Print Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Printing in Windows 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Printing in macOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Configuring the printserver ONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Open Source Software License Disclaimer and License Texts . . . . . . . . . . . .29
2 [en] Quick Installation Guide
General Information
Purpose
The print server 'printserver ONE’ is an active network component which
directly integrates printers or multifunction printers (MFP) into networks. The
print server receives print jobs and forwards them to the printer or MFP.
The administration of the printserver ONE is done via the 'Printserver Control
Center’ and the 'SEH Product Manager’.
Scope of Supply
Check the package content before getting started:
Print server Print server 'printserver ONE'
Quick
Installation
Guide
The Quick Installation Guide provides a brief
description of the installation of the printserver
ONE.
(This document)
Power pack External power pack
Quick Installation Guide [en] 3
Technical Data
Properties Values
Network connectorlogical:
physical: IEEE 802.3 (1000BaseT, 100BaseTX and 10BaseT)
1 × RJ-45 (STP, category 5 or better)
Printer port • 1 × USB 3.0 SuperSpeed
Current input • max. 1.4 A at 5 V with full load on the USB port
• approx. 0.5 A at 5 V when connecting a printer
Power consumption • max. 8W
• approx. 2.5 W with a printer
• approx. 22–70 kWh/year, depending on utiliza-
tion
Operating environment ambient temperature: 5–40 °C
relative humidity: 20–80 %
Dimensions width: 120 mm
height: 29 mm
depth: 84 mm
weight: 116 g (without power supply unit)
USB port with LED
network connector
(RJ-45)
(at the rear side)
power supply
connector
(at the rear side)
status LED
(RGB)
activity LED
(yellow) link LED
(green)
button
(status/reset)
4 [en] Quick Installation Guide
LED Display
The LEDs of the print server provide information about its status.
Type Plate
The type plate gives important product information, such as hardware and
certification information as well as the serial number. The serial number
contains the production date: nnn YYYY MM nnnnn.
This information helps you e.g. during maintenance and is needed for support
requests.
LED Action Color Description
Link and
Activity permanently off – There is no connection to the network.
Link permanently on green There is a connection to the network.
Activity blinks at
irregular
intervals
yellow Indicates the exchange of printing
data packets.
Status blinks 3 times
blinks 2 times
blinks
green
green
white
Indicates the assignment of a Zeroconf
IP address.
Indicates the assignment of an IP
address that is not from the Zeroconf
range.
TCP packets are received.
USB port permanently off
permanently on
–
green
No printer is connected to the USB
port.
A printer is connected to the USB port.
Important:
When the device starts up, the behavior of the LEDs
differs from this description.
Quick Installation Guide [en] 5
Safety Regulations
Print servers are active network components for printers in office environments
and are designed for the direct integration of printers into networks.
• Read the documentation and make sure that your system meets the require-
ments listed therein.
• Avoid contact with humidity or liquids.
• The device must only be connected and operated if it is in perfect condition.
• Make sure that no-one steps on or stumbles over the cables.
• If the supplied power cord cannot be used in your country, acquire an appro-
priate power cord that suits national provisions. For more information, con-
sult your retailer.
• Do not connect a telephone cable to the RJ-45 connector. The RJ-45 connec-
tor may only be connected to SELV voltages. For the connection to the RJ-45
connector only STP cabling (category 5 or better) may be used. The shielding
must fit flushly to the connector.
• Do not open the housing. Unauthorized modifications to the device can af-
fect the product certification and are forbidden.
• The device must not be directly connected to outdoor lines.
• The device must only be operated using the power pack included in the
package.
• Only use a certified USB cable (< 3 m) listed at www.usb.org.
• Electrostatic discharges (ESD) may impair device performance.
• An interruption of the supply voltage may impair device performance or
cause malfunctions.
Important:
Before starting the installation and the initial setup
procedure as well during the operation of the print
server, note the following safety regulations. Their
purpose is to protect yourself and others from personal
injuries, and to avoid damage to the equipment.
6 [en] Quick Installation Guide
Hardware Installation
A printer can be connected via the USB port of the printserver ONE and made
available in the network.
1. Turn the printer off.
2. Disconnect the power cord from the printer. (Interrupt power supply).
3. Connect the printer and the print server using the USB cable.
4. Connect the network cable (RJ-45) to the print server.
5. Connect the power cord to the print server.
6. Connect the power cord to the printer.
7. Turn the printer on.
Important:
Only use USB cables shorter than 3 meters.
Important:
In order to verify the installation you can print a status
page. To do this, press the print server's button for a
short time.
A status page can only be printed if the printer supports
the data formats ASCII, PostScript, DATAMAX (label
printer), or Citizen-Z (label printer).
Quick Installation Guide [en] 7
Finding the Print Server in the Network
Once the print server is connected to the network, it checks whether an IP
address can be obtained from the boot protocols BOOTP or DHCP. If this is not
the case, the print server assigns itself an IP address via Zeroconf from the
address range (169.254.0.0/16) which is reserved for Zeroconf.
By means of the SEH Product Manager tool you can find the print server's IP
address and, if necessary, assign a suitable IP address to the print server, as
described below.
• ’Software Installation 'SEH Product Manager’’ 7
• ’Finding the Print Server (Determining the IP Address)’ 8
• ’Changing the IP address’ 9
Software Installation 'SEH Product Manager’
The 'SEH Product Manager' is a software tool developed by SEH
Computertechnik GmbH for the administration and management of SEH
Computertechnik GmbH devices on the network.
The software is installed on all clients from which SEH Computertechnik GmbH
devices are to be administrated and managed on the network.
First, you have to download the installation file for the SEH Product Manager
from the website of SEH Computertechnik GmbH:
http://www.seh-technology.com/services/downloads/
download-printserver-extern/printserver-one.html
Important:
The client, printer and print server must be assigned to
the same local network segment.
8 [en] Quick Installation Guide
System requirements:
– Windows 10, Windows Server 2012 or later
macOS 10.12.x or later
– The installation can only be carried out by users with administrative rights.
1. Start the SEH Product Manager installer.
2. Follow the installation routine.
The SEH Product Manager is installed on your client.
You can recognize the SEH Product Manager by its icon: . The program is
started with the usual methods of your operating system.
The program automatically searches for SEH Computertechnik devices on the
network after starting. For more information see the 'SEH Product
Manager Online Help'.
Finding the Print Server (Determining the IP Address)
All SEH print servers found in the network are displayed in the SEH Product
Manager.
If the print server has received an IP address via the boot protocols BOOTP or
DHCP, you can identify it with the help of it's type designation. If you are using
several print servers of the same type, identify the print server using it's
hardware address. You can find the hardware address in the type plate at the
bottom of the print server.
If the print server has assigned itself an IP address via Zeroconf from the address
range (169.254.0.0/16) which is reserved for Zeroconf, you can assign a new IP
address to the print server, see 9.
Table des matières
Langues :
Autres manuels SEH Serveur d'impression
