Symbol Name Description DetailsSymbol
Direction indicator
(Left/Right)
1. Flash when the left/right turn button is
pressed.
2. When both direction indicators (left and
right) lights up simultaneously with the
warning indicator, the vehicle is in a
warning state.
When the side stand is folded up and a person
sits on the seat, press the Auto Key, and is on.
READY indicator When READY is on, the vehicle is good to go.
1. When toggled (at left combination switch) to the
left/right, the left/right turn signal turns on. Press
again to turn off the turn signal.
2. When pressed (at right combination switch) , the
left/right turn signal and this indicator will flash to
alert pedestrians and other vehicles. press again
to remove the warning.
The high beam is on when it lights up.
The low beam is on when it lights up.
The battery power is low and needs charging
when it lights up.
Passing beam headlamp
Driving beam headlamp
Battery charge When the battery power is low, this indicator lights up
and the battery level bar on the dashboard flashes.
Find button at left combination switch,
toggle to light up the high beam.
The vehicle is connected to a phone when it lights up.
The indicator light is off when the vehicle
working normally.
The vehicle is in cruise control when it lights up.
When the icon flashes, the vehicle has a malfunction.
The vehicle is locked when the icon lights up.
Indicates current time.
If the symbol stays on when the speed is ≥ 5 km/h, it
means there is an error in the ABS.
Bluetooth
ABS indicator
Cruise control
Vehicle fault
Vehicle lock
1. Indicates the current speed.
2. Displays the error code when there is a
malfunction.
: Imperial units
: Metric unit
Speed display
Clock
During riding, press (at the left combination
switch) to lock the current vehicle speed; Turn the
throttle or brake lever to remove the cruise control.
Click the "+/-" button to increase or decrease the
cruise speed by 5 km/h.
Long press the "+/-" button to continuously increase
or decrease the cruise speed by 1 km/h.
After releasing the "+/-" button, the vehicle cruises at
the latest set speed.
Press on the Remote Control to lock the vehicle;
Press to unlock the vehicle, at the same time, this
indicator off.
The indicator light will light up when the
vehicle has a malfunction.
This indicator will flash once when powering on;
This indicator will light up when the vehicle has an
electric malfunction, and the error code will be
displayed on the dashboard.
Malfunction indicator
lamp
Symbol Symbol Name Meaning
Left combination switch
Passing/Driving
beam switch
Turn signal switch
Horn switch
Right combination switch
Riding mode switch
Hazard warning
switch
Auto key
Cruise switch
Controller switch
36
1. Toggle it to the right to activate the high beam; toggle it to the center to turn off the high beam.
2. Slide it all the way to the left to turn on the overtaking signal; Release to cancel the overtaking signal.
Passing/Driving
beam switch
When the vehicle is on, double-press to open the seat bucket or press and hold to switch off the vehicle. If the
AirLock is enabled in the App, hold this button while the paired phone is within range to turn on the vehicle.
When the side stand is folded up and the rider is on the seat, press this key and READY indicator is on.
Press "+" to switch the modes in sequential order, and press "-" to switch the modes in reverse order.
When pressed, the horn is sounded to alert pedestrians or other vehicles.
Turn signal
switch
Hazard warning
switch
Horn switch
Cruise switch
Riding mode
switch
Auto key
When toggled to the left, the left turn signal turns on. The button resets automatically after releasing.
Toggle it to the center and press to turn off the left turn signal.
When toggled to the right, the right turn signal is on.The button resets automatically after releasing.
Place it at the center and hold down to turn off the right turn signal.
When pressed, the vehicle will cruise at the current speed. The cruise control can be cancelled by
pressing the button again, turning the throttle, or by braking.
When the button is pressed, both the left and right turn signals will flash to alert pedestrians and other
vehicles.
Indicates the current gear.
Bars of remaining battery.
Riding mode
Remaining battery level
Symbol Name Description CommentsSymbol
Indicates the total distance traveled. : Imperial units
: Metric unit
Range
Status display
: While the vehicle is locked, insert the key and turn to ON mode.
: The vehicle is still at ON mode when trying to turn it off via remote control or by pressing the Auto button.
: The throttle is turned while the side is supported.
: The throttle is turned when there is no rider. : The throttle is turned while charging.
11 12
