within 5 seconds, the keypad will exit setup state automatically.
Arm
Press , keypad and control panel beeps once to enter
arming state. Any detectors triggered will activate the system to
alarm immediately. The system will then simultaneously call the
preset phone numbers.
Stay Arm (Home Mode)
Press , control panel beeps once to enter arming state
after 3 seconds. The accessories in home mode are disarmed,
this allows the user to move freely at home, while the rest of
the system is fully armed, the accessories in normal zones will
activate an immediate alarm when triggered.
Disarm
Press , keypad beeps once and control panel beeps twice
into disarming state, the electronic door lock will be opened as
well (If connected).
Mute Mode
Press “ ” button, then press“ ” or“ ” within 3 seconds to
enter arming or disarming state in mute mode.
SOS Emergency Call
If there's an emergency situation, press SOS for 3 seconds to
activate an immediate alarm.
Note! To avoid any false operation, please enable “Emergency Call
with Password” - refer to Page9.
Disarm by RFID Tag/Card
7
6
Note! Press“ ” to activate keypad, if no operations are performed
*
+ /
In power saving mode, press“
* ”to activate keypad. Put RFID tag close
to the RFID reader to disarm the system. And the electronic door lock
will be opened as the same time.
You can use the RFID tag normally to disarm the system if system is
not in power saving mode.
Digital Keypad Operation
In power saving mode, please press “ ” t
* o activate keypad.
Then please enter admin password# or user password#
before operating the digital keypad.
Admin password is 123456 as default
User password is 1234 as default
