SecurityMan IPCAM-SDII Manuel utilisateur

IPCAM-SDII Quick Start Guide (iPhone)

The SecurityMan IPCAM-SDII is

designed for quick and easy

installation. This guide will help you

get your camera connected to your

mobile device in 3 easy steps.

Step 1 HARDWARE

Step 2 INSTALL APP & SCAN QR CODE

1 2

1. Open the App Store on your mobile device. Then search for and

install the “IPCam Live” application. Once installed, tap on the

“IPCam Live” icon (ﬁg. 2.1), select “By Device” (ﬁg. 2.2) and then

select the “Add” button (ﬁg. 2.3).

Fig2.1 Fig2.2

Fig2.6

Fig2.5Fig2.4

Fig2.3

2. Tap on the QR Code Icon (ﬁg. 2.4) and point your iPhone camera at

the QR Code located on the back of the camera (ﬁg 2.5). The serial

number will be displayed once the QR Code is scanned. At this point

you may choose to rename your device under “Name” and then press

“Save” located on the upper right hand corner of the screen (ﬁg. 2.6).

3. Now select your device (ﬁg. 2.7) to bring up the live view screen (ﬁg

2.8).

NOTE: The following images will appear stating “Connecting…” and

“Buering…” If successful, your IPCam image will be displayed.

Connect the Power

Adapter

Attach the antenna

Connect the Ethernet

Cable to your Router

IPCAM-SDII Quick Start Guide (iPhone)

3 4

1. Tap on the “Home” icon located on the upper right hand corner of

the screen (ﬁg. 2.8). Select “Device Setting” (ﬁg. 3.1). Select your

device (ﬁg. 3.2). Select “Wi-Fi” (ﬁg. 3.3).

2. Make sure both “Enable” & “DHCP” are enabled (switched to green)

and click “Search” (ﬁg. 3.4). Select the Wi-Fi name that is associated

with your network by tapping on the name (ﬁg.3.5).

3. Once your Wi-Fi name has been selected, type in the password

associated with your Wi-Fi network (ﬁg. 3.6). If the password space is

already ﬁlled, delete anything in the space and type in your password.

Now tap on “Save” located on the upper right hand corner of the

screen (ﬁg. 3.7) and tap “OK” on the “Saved Successful” prompt (ﬁg.

3.7).

4. Go back to the live view screen. Unplug the Ethernet cable from the

back of the IPCam-SDII. Wait 30-45 seconds for the Wi-Fi access. Wi-

Fi setup complete.

NOTE: STEP 2 must be complete before beginning STEP 3.

NOTE: Password is case sensitive. If the password is incorrect, the

message will still show “Saved Successful”.

NOTE: Your camera screen will freeze once the Ethernet cable is

unplugged. If the password is incorrect, the camera screen will show

“Failed to connect”.

Step 3 Wi-Fi SETUP

Fig2.7

Fig3.1

Fig2.8

Fig3.2

Fig3.3

Fig3.4 Fig3.5

Fig3.6 Fig3.7

IPCAM-SDII Quick Start Guide (Android)

The SecurityMan IPCAM-SDII is

designed for quick and easy

installation. This guide will help you

get your camera connected to your

mobile device in 3 easy steps.

Step 1 HARDWARE

Step 2 INSTALL APP & SCAN QR CODE

1 2

1. Open the Play Store on your mobile device. Then search for and

install the “IPCam Live” application. Once installed, tap on the

“IPCam Live” icon (ﬁg. 2.1), select “By Device” (ﬁg. 2.2) and then

select the “Add” button (ﬁg. 2.3).

Fig2.1 Fig2.2

Fig2.6

Fig2.5Fig2.4

Fig2.3

2. Tap on the QR Code Icon (ﬁg. 2.4) and point your Android camera at

the QR Code located on the back of the camera and press “Ok” once

the image is captured (ﬁg 2.5). The serial number will be displayed

once the QR Code is scanned. At this point you may choose to

rename your device under “Device Name” and then press “Save”

located on the upper right hand corner of the screen (ﬁg. 2.6).

3. Now select your device (ﬁg. 2.7) to bring up the live view screen (ﬁg

2.8).

NOTE: The following images will appear stating “Connecting…” and

“Buering…” If successful, your IPCam image will be displayed.

Connect the Power

Adapter

Attach the antenna

Connect the Ethernet

Cable to your Router

IPCAM-SDII Quick Start Guide (Android)

3 4

1. Tap on the “Home” icon located on the upper right hand corner of the

screen (ﬁg. 2.8). Select “Device Setting” (ﬁg. 3.1). Select your device

(ﬁg. 3.2). Select “Wi-Fi” (ﬁg. 3.3).

2. Make sure both “Enable” & “DHCP” are enabled (green check mark)

and click “Search” (ﬁg. 3.4). Select the Wi-Fi name that is associated

with your network by tapping on the name (ﬁg.3.5).

3. Once your Wi-Fi name has been selected, type in the password

associated with your Wi-Fi network (ﬁg. 3.6). If the password space is

already ﬁlled, delete anything in the space and type in your password.

Now tap back-arrow on your phone to hide the key pad and tap on

“Save” located on the bottom left hand corner of the screen (ﬁg. 3.7).

At this point you should get a “Successfully Changed” message and

sent back to the previous screen (ﬁg. 3.8).

4. Go back to the live view screen. Unplug the Ethernet cable from the

back of the IPCam-SDII. Wait 30-45 seconds for the Wi-Fi access. Wi-

Fi setup complete.

NOTE: STEP 2 must be complete before beginning STEP 3.

NOTE: Password is case sensitive. If the password is incorrect, the

message will still show “Saved Successful”.

NOTE: Your camera screen will freeze once the Ethernet cable is

unplugged. If the password is incorrect, the camera screen will show

“Failed to connect”.

Step 3 Wi-Fi SETUP

Fig2.7

Fig3.1

Fig2.8

Fig3.2

Fig3.3

Fig3.4 Fig3.5

Fig3.6 Fig3.7

Fig3.8

Autres manuels SecurityMan Système de sécurité

SecurityMan

SecurityMan DigiLCDDVR2 Manuel utilisateur

SecurityMan

SecurityMan DigiLCDNDVRB Manuel utilisateur

SecurityMan

SecurityMan AIR-ALARM II SERIES Manuel utilisateur

SecurityMan

SecurityMan DigioutLCD Manuel utilisateur

SecurityMan

SecurityMan IWATCHALARMD Manuel utilisateur

SecurityMan

SecurityMan SECURITYBARPD Manuel utilisateur

SecurityMan

SecurityMan SECURITYBARB Manuel utilisateur

SecurityMan

SecurityMan LCDDVR4-500S Manuel utilisateur

SecurityMan

SecurityMan Air-AlArm1 Manuel utilisateur

SecurityMan

SecurityMan NDVR8 Manuel utilisateur

SecurityMan

SecurityMan DigiairWatch Series Manuel utilisateur

SecurityMan

SecurityMan AVLCD Manuel utilisateur

SecurityMan

SecurityMan COLLAPSECONEKIT Manuel utilisateur

SecurityMan

SecurityMan HomeDVR-KT1B Manuel utilisateur

SecurityMan

SecurityMan SECURITYBARA Manuel utilisateur

SecurityMan

SecurityMan DigioutLCD Manuel utilisateur

SecurityMan

SecurityMan SolarPIR Manuel utilisateur

SecurityMan

SecurityMan SECURITYBAR Manuel utilisateur

SecurityMan

SecurityMan Air-AlArm1 Manuel utilisateur

SecurityMan

SecurityMan SM-GSMdialer Manuel utilisateur

SecurityMan

SecurityMan Air-AlArm Manuel utilisateur

SecurityMan

SecurityMan DigiLCDDVR Series Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur