SecuGen Hamster Air Manuel utilisateur
Hamster Air™User Guide
© 2021 SecuGen Corporation. All rights reserved. SG1-0300A-002
With Hamster Air, there is no contact with the sensor.
We’ve provided these guidelines to help you get the best results.
Hamster Air™is different from other
SecuGen fingerprint readers
2
Contact
Contactless
Before first use
1. Remove plastic film 3. Discard2. Pull up on red tab
Plastic film
3
4
How to use
How to use
Your fingerprint
should face down
Keep your finger flat
and pointing straight
1. Place your finger straight into the center of the reader
5
6
How to use
2. Slightly raise or lower your finger until you get
a good enrollment or match
If your app shows your fingerprint,
try to get a clear image in focus
Your whole fingertip
should also be centered
If your app shows your fingerprint,
use it to help you find the center
How to use
7
3. Make sure your finger is in the center of the reader
How to use
4. The LED light will turn on when scanning. Keep your finger steady.
8
9
Tips for better scanning
✓Make sure your whole fingertip is in the center of the reader
10
It contains the fingerprint core, which is used for enrolling and matching
Tips for better scanning
The whole fingertip starts from
the first joint and continues to
the end of the finger
Table des matières
Autres manuels SecuGen Contrôleurs d'accès IP
