Secufirst DID701 S Manuel utilisateur
DID701 S / B / BB
Wi-Fi doorbell with wireless bell
Big Manual
This big manual would help you through all the
possible questions you might have during the use of
the camera. Below is the overview of the topics within:
1. Product Overview P03~P08
2. How to Install P09~P17
3. Preparation Before Setup on Smart Device P18~P19
4. Camera Setup on Smart Device P20~P28
5. Add Second Smartphone/Tab P29~P31
6. Notification Setting P32~P35
7. Advance settings P36~P68
8. Connect Wired Internet P69~P74
9. Record motion detection P75~P82
10.Playback recording P83~P88
11.Connect a wireless chime P89~P93
Product Overview
3
Product Overview – Wi-Fi Doorbell
4
Lens
Microphone
Light Sensor
Push Button
Loud Speaker
Rubber cover
For wiring
Wall mount holder
Product Overview – Wi-Fi Doorbell
5
1
2
3
4
5
1. Reset button (Hold for 10 seconds)
2. Connection Wired Chime indoor (C1, C2 / 0V)It's only possible to
connect a Mechanical Chime which is powered by an 8V AC
transformer. The separate power supply is AC, so it doesn't matter
which wire goes to C1 and C2.
3. RJ45 internet cable connection (TD-, TD+, RD-, RD+)
Note, an internet cable has 8 wires. We only need 4 wires to connect to
the Wi-Fi Doorbell.
TD- = Internet cable, Orange color wire
TD+ = Internet cable, Orange / White color wire.
RD- = Internet cable, Green color wire.
RD+ = Internet cable, Green / White color wire.
Note, wired internet only works when you firstly connect the internet cable to
the Wi-Fi Doorbell and router. After that, insert the adapter in the socket.
Product Overview – Wi-Fi Doorbell
6
1
2
3
4
5
4. Adapter connection (V+, V- / 12V 1A)
V+ = Red Wire V- = Black wire
Note, pay attention to connect correctly!!!
5. Connection for electrical lock (B1 + B2 / 0V).
Product Overview – Wireless Bell
7
Loud Speaker Volume Settings
No function when
bundle using with Wi-
Fi Doorbell
No function when
bundle using with Wi-
Fi Doorbell
Product Overview – APP
8
The camera comes with free to download app called
“SecuFirst HD Professional Edition”
You could scan below QR code to download the app.
Android Phone
Scan Here
iOS Phone
Scan Here
How to install
9
How to install
Remove the rubber cover on the backside of
the Wi-Fi Doorbell.
Connect the adapter with the extension cord.
Use the screwdriver to punch a hole into the
rubber cover.
Insert the extension cord through the rubber
cover.
Connect the extension cord to the Wi-Fi
Doorbell (V+ red wire, V- black wire). After that,
insert the adapter into the power socket.
Close the rubber cover again.
Note, don't connect an internet cable during the
installation.
See below pages for connection diagram
10
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Secufirst Accessoires
