6. Once the two (2) shoulder bolts are removed the support arm will be
able to be removed from the top assembly.
Support Arm Installation Instructions
1. Install the new support arm through the slot located in the top
assembly.
2. Replace the two (2) shoulder bolts to secure the new support arm into
the top assembly.
3. Carefully lower the top BBQ assembly back into the bottom enclosure.
**Be very careful not to break any of the electrical wiring or damage
the electrical switch**
4. Replace the (4) four sheet metal screws from the bottom enclosure. (2)
Two screws are located on the front of the BBQ, and the other (2) two
screws are located on the back of the BBQ.
5. Replace BBQ unit back into counter top.
6. Reconnect BBQ unit to power source.
