Sealey TP80 Manuel utilisateur

 WARNING! This pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and

regulations.

Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.

Maintain the pump in good condition. Keep the pump clean.

Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be dangerous and will

invalidate the warranty.

DO NOT operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.

DO NOT use the pump for any purpose other than for which it is designed.

DO NOT operate pump out of liquid. The pump pick up area must be completely submerged during operation.

DO NOT operate the pump during freezing temperatures. DO NOT leave the pump in liquid that may freeze.

DO NOT carry the pump by its electrical cable, or outlet pipe.

When not in use rinse pump, drain out any liquid and store in a frost free, safe location

 WARNING! DO NOT allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment.

INSTRUCTIONS FOR:

ELECTRIC JERRY CAN PUMP

MODEL No: TP80

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/

OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATIONS

Easily transfers uid from 5, 10 & 20ltr jerry cans. Compatible for use with petrol, diesel, kerosene and water. Hook storage design allows pump to

attach onto jerry can and features a height adjustable control to accommodate different sized containers. Fitted with auto-stop feature to prevent

overlling. Operated by an electric motor powered by 2 x AA batteries (not included).

Model No: ............................................................... TP80

Hose Length: ............................................................700mm

Flow Rate: ..............................................................9ltr/min

Batteries: ....................................................2 x AA (not included)

TP80 Issue:1 14/03/14

Original Language Version

3. BATTERY FITTING

4. OPERATION

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: Call us for a copy of our latest catalogue and promotions on 01284 757525 and leave your full name and address including postcode.

3.1. Slide battery compartment open as in g.1.

3.2. Insert 2 x AA batteries as in g.2, observing the correct polarity.

3.3. Replace sliding cover.

3.4. Removal of the batteries is the reverse of 3.1 to 3.3.

g.1 g.2

4.1. Remove the pump from the holder (g.3), which may be hooked onto the handle of the jerry can using the hanging hook provided (g.4)

4.2. Lower the pump stem into the jerry can until it rests on the base of the can.

4.3. Place the delivery nozzle into the receiving container; the nozzle may be either wedged or clipped in place using the attached moulded

spigot.(see g.5.1)

4.4. To start the pump, slide the switch (g 5.2)

4.5. The pump will switch off automatically when the dispensed liquid reaches the stop line (g.5.3) or manually at any point before then.

The pump is tted with an anti-vacuum valve to prevent syphoning.

4.6. DO NOT leave the pump unattended whilst it is running.

g.3 g.4 g.5

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Environmental Protection.

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.

Battery Removal

Remove the batteries as in section 3. Dispose of battery according to local government guidelines.

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products

containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.

Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705

TP80 Issue:1 14/03/14

Original Language Version

Table des matières

Autres manuels Sealey Pompe à eau

Sealey

Sealey wpd133a Manuel utilisateur

Sealey

Sealey BC110.V2 Manuel utilisateur

Sealey

Sealey WPCD215 Manuel utilisateur

Sealey

Sealey WPS060 Manuel utilisateur

Sealey

Sealey WPB062S.V2 Manuel utilisateur

Sealey

Sealey WPD235P Manuel utilisateur

Sealey

Sealey TP98 Manuel utilisateur

Sealey

Sealey WPS225P Manuel utilisateur

Sealey

Sealey WPS92A Manuel utilisateur

Sealey

Sealey AK456 Manuel utilisateur

Sealey

Sealey SWP20 Manuel utilisateur

Sealey

Sealey TP6818.V2 Manuel utilisateur

Sealey

Sealey TP6918 Manuel utilisateur

Sealey

Sealey WPC100.V3 Manuel utilisateur

Sealey

Sealey AK450DP Manuel utilisateur

Sealey

Sealey TP50.V4 Manuel utilisateur

Sealey

Sealey WPC100.V2 Manuel utilisateur

Sealey

Sealey SMP60 Manuel utilisateur

Sealey

Sealey WPL117A Manuel utilisateur

Sealey

Sealey TP98 Manuel utilisateur

Sealey

Sealey WPC100A.V3 Manuel utilisateur

Sealey

Sealey TP51.V2 Manuel utilisateur

Sealey

Sealey TP9424.V2 Manuel utilisateur

Sealey

Sealey TP6801 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur