Sealey BC110.V2 Manuel utilisateur

INSTRUCTIONS FOR

WORKSHOP PUMP

MODEL NO: BC110.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING!

9Read operating instructions before use.

9Check capacity and maximum inflation pressure of inflatable before commencing inflation.

9Monitor the pressure gauge while in operation. The gauge should be used as an indication of pressure only. We recommend the use of

a dial pressure gauge for definitive reading.

WARNING! DO NOT inflate any item beyond its maximum capacity.

8DO NOT carry by the hose, or yank the hose from an inflation valve.

8DO NOT use the pump for a task it was not designed to perform.

8DO NOT operate the pump when you are tired, under the influence of alcohol, drugs or intoxicating medication.

8DO NOT operate the pump if any parts are missing as this may cause failure or possible personal injury.

9Keep children and non essential persons away from the inflation area.

9Keep the pump clean and in good condition.

9Replace or repair damaged parts.

2. INTRODUCTION

Durable construction with chrome plated steel upright tube. Dial type high pressure gauge with rotating bezel. Gauge calibrated in psi and bar

with ranges from 0-160psi and 0-8 bar. Fitted with twin head for both Presta and Schrader valves and a 360° rotatable hose. Features a wide

base for added stability with foldable foot stand. Supplied with accessories for inflating items such as small inflatable boats, air beds and balls

stored in a compartment located in the handle.

3. SPECIFICATION

Model No................................................................ BC110.V2

4. OPERATION

Maintenance

BC110.V2 | Issue 1 15/09/16

Original Language Version

Refer to

instructions

g.1

g.2 g.3

4.1. Remove all packaging and fold out feet g.2.

4.2. Select correct connector g.4 /g.5 for required valve and attach to pump hose as required / push or attach to valve.

4.3. Place foot on pump foot g.6, grasp handles. raise and lower handles to pump air into item to be inated.

5. MAINTENANCE

5.1. Keep pump clean, by wiping with damp rag.

5.2. Store in a dry, child proof area.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Sole UK Distributor, Sealey Group.

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk.

IP32 7AR

www.sealey.co.uk

sales@sealey.co.uk

01284 757500

01284 703534

BC110.V2 | Issue 1 15/09/16

Original Language Version

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

g.4 g.5 g.6

Table des matières

Autres manuels Sealey Pompe à eau

Sealey

Sealey SMP60 Manuel utilisateur

Sealey

Sealey TP98.v2 Manuel utilisateur

Sealey

Sealey WPB50A Manuel utilisateur

Sealey

Sealey WPW9355 Manuel utilisateur

Sealey

Sealey TP6918 Manuel utilisateur

Sealey

Sealey wps250a Manuel utilisateur

Sealey

Sealey AK4555D.V2 Manuel utilisateur

Sealey

Sealey TP51.V2 Manuel utilisateur

Sealey

Sealey TP9424.V2 Manuel utilisateur

Sealey

Sealey WPL117A Manuel utilisateur

Sealey

Sealey WPD235A.V2 Manuel utilisateur

Sealey

Sealey EWP40 Manuel utilisateur

Sealey

Sealey WPD415.V2 Manuel utilisateur

Sealey

Sealey TP96.V3 Manuel utilisateur

Sealey

Sealey TP99.V3 Manuel utilisateur

Sealey

Sealey WPD235P Manuel utilisateur

Sealey

Sealey TP80 Manuel utilisateur

Sealey

Sealey AK450DX Manuel utilisateur

Sealey

Sealey Power PRODUCTS TP96.V2 Manuel utilisateur

Sealey

Sealey TP9312 Manuel utilisateur

Sealey

Sealey TP6807 Manuel utilisateur

Sealey

Sealey TP98 Manuel utilisateur

Sealey

Sealey AK452X.V4 Manuel utilisateur

Sealey

Sealey AK458DX.V3 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur