Sealey AP7150C Manuel utilisateur
INSTRUCTIONS FOR:
CORNER RACKING UNIT 5 LEVEL -
150KG CAPACITY PER LEVEL
MODEL No: AP7150C
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. INTRODUCTION
3. CONTENTS
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using this racking unit.
Locate racking unit in a suitable work area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING! Use racking unit on level and solid ground,
preferably concrete.
Keep the racking unit clean and tidy in accordance with
good workshop practice.
Keep children and unauthorised persons away from the work
area.
DO NOT use the racking unit for any purpose other than
that for which it is designed.
DO NOT use the racking unit outdoors.
DO NOT place the racking unit in a damp or wet location or
an area where there is condensation.
DO NOT clean the racking unit with any solvents which
may damage the surfaces or the protective coating.
DO NOT move the racking unit when there are items
placed on it.
DO NOToverload the racking unit.
Fully painted steel frame with ve shelves. Space saving corner unit with
150kg capacity per level giving a maximum capacity of 750kg per rack.
Two piece uprights allow use as a single bay rack or split into two
separate shelf systems or workstations. Ideal for use in conjunction with
Model No. AP7200 racking unit.
Dimensions:
Overall Width: 730mm, Depth: 730mm, Height: 1830mm.
Unpack the contents of the box and check against the parts
list. If there are any parts missing, contact your Sealey dealer.
Part Part Name No. of
A Shelf Bracket - Rear 8
B Shelf Bracket - Side 8
C Top Shelf Bracket - Rear 2
D Top Shelf Bracket - Side 2
E Shelf Bracket - Front 4
F Top Shelf Bracket - Front 1
G Shelf Brace 5
H Leg 6
I Leg 4
J Shelf 5
K Plastic Foot 3
L Plastic Foot 2
M Connector 5
Original Language Version AP7150C Issue: 1 - 22/08/12
© Jack Sealey Limited
4.1. Assemble the racking unit following the sequence below, referencing the parts list overleaf. No tools are required
although a mallet is useful for tapping the brackets together.
4. ASSEMBLY
Original Language Version AP7150C Issue: 1 - 22/08/12
© Jack Sealey Limited
Fig.1 Fig.2
Fig.3 Fig.4
4.2. Place foot caps onto the bottom of legs H and I. Place
rear shelving brackets A onto the legs. A rubber mallet
can be used to lightly tap the brackets into place in the
keyholes in the legs (note the upright position of the
keyhole).
4.3. Fit shelf bracket B for the side brackets at the same
height as shelf bracket A, then t shelf bracket E. Fit
brace G as shown above.
4.4. Join the lower and upper legs with the connector pins
as shown in Fig.3 (note the upright position of the
keyhole).
4.5. Fix shelf brackets A so that the top rivet sits in the
upper legs and the lower rivet sits in the lower legs.
Repeat with shelf brackets B and E, followed by brace
G, at the same level.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business
Park, Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version AP7150C Issue: 1 - 22/08/12
© Jack Sealey Limited
4.6. Fix brackets C, D and F at the very top allowing space
for the MDF shelf to sit ush against the legs.
Fig.5 Fig.6
Fig.7
4.7. Apply remaining brackets at desired heights, ensure a
brace G is also xed at each shelf height.
4.8. Place the MDF shelves at each height ensuring that
they sit ush on the brackets.
NOTE: DO NOT t the shelves until racking unit is
otherwise complete.
Ce manuel convient aux modèles suivants
2
Autres manuels Sealey Support et étagère
Sealey
Sealey RPS6 Manuel utilisateur
Sealey
Sealey API10 Manuel utilisateur
Sealey
Sealey APTT Manuel utilisateur
Sealey
Sealey FPS5.V2 Manuel utilisateur
Sealey
Sealey AP6548 Manuel utilisateur
Sealey
Sealey AS10 Manuel utilisateur
Sealey
Sealey STR004 Manuel utilisateur
Sealey
Sealey MK62 Manuel utilisateur
Sealey
Sealey AAS3000 Manuel utilisateur
Sealey
Sealey VS301 Manuel utilisateur
Sealey
Sealey AS3.V2 Series Manuel utilisateur
Sealey
Sealey VS5281 Manuel utilisateur
Sealey
Sealey ASH2000 Manuel utilisateur
Sealey
Sealey AS3G.V1 Manuel utilisateur
Sealey
Sealey AS10H.V2 Manuel utilisateur
Sealey
Sealey AS12 Manuel utilisateur
Sealey
Sealey VS1003 Manuel utilisateur
Sealey
Sealey LR680.V2 Manuel utilisateur
Sealey
Sealey VS2006.V4 Manuel utilisateur
Sealey
Sealey ASH4000 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
