Sealey TD1202S Manuel utilisateur

INSTRUCTIONS FOR

SLIDE RATCHET TIE DOWN 32MM X 3MTR POLYESTER

WEBBING WITH S HOOKS 1200KG LOAD TEST

MODEL NO: TD1202SR

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

9When selecting web lashings (tie downs) consideration must be

given to the required lashing capacity, taking into account the

mode of use and the nature of the load to be secured.

9Tie downs must be strong enough and of the correct length for

the mode of use.

9Take care that the load is stable when the tie down is released.

9Avoid exposure of the tie down to chemicals.

8DO NOT use if tie down is damaged. A visual inspection before

use is recommended.

9Avoid sharp edges. Protect tie downs by using sleeves or

corner protectors.

DO NOT overload.

8DO NOT use if knotted.

2. INTRODUCTION

Manufactured from polyester webbing with stitched reinforcement around hooks and all xing points. Suitable for securing weighty

loads and tarpaulins onto trailers. Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing

superior load restraint. Sliding feature allows mechanism to be located at any point along run of webbing, resulting in reduced load

damage and ease of operation. Hook and loop retainers tidy away excess webbing for improved safety and reduced wear. Supplied in

plastic display case.

3. SPECIFICATION

Model no: ............................................................. TD1202SR

Quantity:...............................................................................2

Maximum tension: ........................................................ 600kg

Load test: ................................................................... 1200kg

Webbing width:............................................................. 32mm

Webbing length: ..............................................................3mtr

Hook: ...........................................................................S-type

4. OPERATION

4.1. TIGHTENING

4.1.1. Open ratchet to unlocked position, g.1.

4.1.2. Place switching latch in sliding position, g.2.

4.1.3. Be sure the centre shaft of the ratchet is parallel with the webbing, g.3. When the ratchet is open the centre shaft can be turned

manually, g.4.

4.1.4. Slide the ratchet along the webbing to the desired operating position, g.1.

4.1.5. Place the switching latch in the locked position, g.2.

4.1.6. Attach hook to anchor ring, g.5.

4.1.7. Make sure webbing is not twisted.

TD1202SR | Issue:1 13/10/17

Original Language Version

Refer to

instruction

manual

fig.1 fig.2 fig.3 fig.4 fig.5

4.1.8. Take up the slack in the webbing by pulling the extra webbing through the centre shaft, g.6.

4.1.9. Begin to ratchet tight, be sure to go 2 complete turns around the centre ratchet tightening shaft, g.7.

WARNING! DO NOT over tighten. The ratchet mechanism can damage or crush objects.

4.1.10. Fold up all excess webbing in a bundle, place on the ratchet and bundle together with the double-sided hook and loop strap, g.8.

4.2. RELEASING

4.2.1. Undo Velcro strap and remove bundle of excess webbing, g.9.

4.2.2. Pull back on the red release handle and then move the ratchet into the 180° open position, strap will unlock, g.10.

4.2.3. Once strap is unlocked, if the webbing is still wrapped around the centre shaft, simply take hold of both pieces of webbing going

through the centre shaft and with a quick snapping action pull both ends and the centre shaft will return to normal ‘ready to use’

position, g.11.

4.2.4. Return the switching latch back to the unlocked (sliding) position, g.12.

4.2.5. Remove the hooks, g.13.

4.2.6. Wrap the strap up and secure with the hook and loop bundling tie attached to the ratchet, g.14.

5. STORAGE

5.1. Always store in a dry place.

6. MAINTENANCE

6.1. Use a light duty oil on the gears and slides to keep the ratchet operating properly.

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

fig.9 fig.10 fig.11 fig.12

fig.13 fig.14

TD1202SR | Issue:1 13/10/17

fig.6 fig.7 fig.8

Table des matières

Autres manuels Sealey Système de levage

Sealey

Sealey MC401A Manuel utilisateur

Sealey

Sealey EVBT700 Manuel utilisateur

Sealey

Sealey AVR1500FP.V2 Manuel utilisateur

Sealey

Sealey MT680 Manuel utilisateur

Sealey

Sealey Quality MACHINERY MC550 Manuel utilisateur

Sealey

Sealey MC365 Manuel utilisateur

Sealey

Sealey AK9894 Manuel utilisateur

Sealey

Sealey HPT300 Manuel utilisateur

Sealey

Sealey MC455.V2 Manuel utilisateur

Sealey

Sealey WCR02 Manuel utilisateur

Sealey

Sealey MC454E Manuel utilisateur

Sealey

Sealey MT500 Manuel utilisateur

Sealey

Sealey MC135 Manuel utilisateur

Sealey

Sealey AK98941 Manuel utilisateur

Sealey

Sealey MC450A Manuel utilisateur

Sealey

Sealey MPSD1 Manuel utilisateur

Sealey

Sealey Quality MACHINERY MC402.V3 Manuel utilisateur

Sealey

Sealey WD80 Manuel utilisateur

Sealey

Sealey HPT400H.V2 Manuel utilisateur

Sealey

Sealey MT680.V4 Manuel utilisateur

Sealey

Sealey MR1.V2 Manuel utilisateur

Sealey

Sealey MC365A Manuel utilisateur

Sealey

Sealey MC5908 Manuel utilisateur

Sealey

Sealey MC365A.V2 Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur