Seagate Nytro Manuel utilisateur

Seagate® Nytro™ XP6302 Flash Accelerator Cards

Thank you for purchasing the

Seagate Nytro XP6302 Flash

Accelerator card. Take a few

minutes to read this quick

installation guide before you

install your card.

For updated documentation,

drivers, and utilities, please visit

http://www.seagate.com/products/solid-

state-flash-storage/accelerator-cards/ or

contact your reseller support

representative.

Quick Installation Guide

To install the Seagate® Nytro™ XP6302 Flash Accelerator card, follow these steps:

1. Unpack the card and inspect it for damage. Unpack the Nytro XP6302 card in a static-

free environment, and follow good antistatic grounding procedures. Remove the card

from the antistatic bag, and carefully inspect the device for damage. If you notice any

damage or if any component is missing, contact Seagate or your reseller support

representative.

CAUTION: Back up your data before changing your system configuration.

2. Prepare the computer. Turn off the computer, and disconnect the power cord from the

power supply. Remove the cover from the chassis.

WARNING: To avoid electrical shock, disconnect the computer from the main power and

from any networks before you install the card.

3. Replace the mounting bracket (system dependent). If required for your system, replace the

half-height mounting bracket that ships on the Nytro XP6302 card with the longer bracket

supplied. Save the two screws from the half-height bracket and use the screws to attach the

long bracket.

4. Insert the Nytro XP6302 card in an empty PCI Express® (PCIe®) slot that provides at least

50 W of power. Without sufficient power the Nytro XP6302 card may be damaged or run at

less than optimal performance. Remove the blank bracket panel on the server chassis that

aligns with the empty PCIe slot. Save the bracket screw, if applicable. Align the card to the PCIe

slot. Press down gently, but firmly, to properly seat the card in the slot. The following figure

shows how to insert the card in a PCIe slot.

NOTE: The shape, size, and locations of components on your Nytro XP6302 card might

vary from this illustration.

CAUTION: For highest performance, make sure that the PCIe slot is PCIe 3.0 and make

sure that it has an active width of dedicated eight lanes.

CAUTION: The location must meet the 300 LFM (linear feet/minute) minimum airflow

requirement.

5. Secure the bracket to the system’s chassis. Install the bracket screw, if applicable, or engage

the system retention mechanism to secure the card to the system’s chassis.

6. Replace the cover, the power cord, and power up the system. Replace the system’s cover,

and reconnect the power cord and any network cables. Turn on the power.

You have now completed the Nytro XP6302 card hardware installation. Use the next procedure

to install the appropriate operating system drivers.

Seagate Technology LLC in the United States and/or other countries. DuraWrite, Nytro, Fusion MPT, and SandForce are either trademarks or

registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other

trademarks or registered trademarks are the property of their respective owners. Nytro products are not intended for use in life-support

appliances, devices, or systems. Use of any Nytro product in such applications without written consent of the appropriate Seagate officer is

prohibited. Seagate reserves the right to change, without notice, product offerings or specifications.

Publication Number: 100765556, Rev. B, April 2015

Windows Driver Installation

The Seagate drivers for Windows Server® 2012 and Windows Server 2008 are available online.

Download the latest Windows drivers from the Seagate website:

1. Go to the following website:

http://www.seagate.com/products/solid-state-flash-storage/accelerator-cards/

2. Click on Nytro XP6302 Flash Accelerator Card.

3. Click Support, and click the driver you need.

4. Download the driver files.

5. Open the Windows Driver Configuration Utility file and follow the instructions to install the

driver.

Linux Driver Installation

Seagate provides open source drivers in the following ways:

• Precompiled binaries to add to an existing installation using driver update disks or RPMs for

selected distributions.

• Fusion-MPT™ source to add or update any distribution.

Download the latest Linux® drivers from the Seagate website.

1. Go to the following website:

http://www.seagate.com/products/solid-state-flash-storage/accelerator-cards/

2. Click on Nytro XP6302 Flash Accelerator Card.

3. Click Support, and click the driver you need.

4. Download the driver files and install the RPM files.

FreeBSD Driver Installation

Download the latest FreeBSD® drivers from the Seagate website.

1. Go to the following website:

http://www.seagate.com/products/solid-state-flash-storage/accelerator-cards/

2. Click on Nytro XP6302 Flash Accelerator Card.

3. Click Support, and click the driver you need.

4. Download the driver files and install the drivers.

VMware ESXi5.1, ESXi 5.5

Download the latest VMware® drivers from the Seagate website.

1. Go to the following website:

http://www.seagate.com/products/solid-state-flash-storage/accelerator-cards/

2. Click on Nytro XP6302 Flash Accelerator Card.

3. Click Support, and click the driver you need.

4. Download the driver files and unzip. Install the drivers.

You have now completed the hardware and software installation

for your Nytro XP6302 card.

TECHNICAL SUPPORT

For assistance installing, configuring, or

using the Seagate Nytro XP6302 card,

contact Seagate Technical Support:

Submit a support ticket here: http://

support2.seagate.com/

Phone: 1-800-732-4283 (North America)

+00-800-732-4283 (International)

Website: www.seagate.com

Ce manuel convient aux modèles suivants

Autres manuels Seagate Stockage

Seagate

Seagate Cheetah 18XL Manuel utilisateur

Seagate

Seagate ST2400MM0129 Manuel utilisateur

Seagate

Seagate ST336807FC - Cheetah 36 GB Hard Drive Manuel utilisateur

Seagate

Seagate Barracuda ST310220A Manuel utilisateur

Seagate

Seagate Slim STCD500100 Manuel utilisateur

Seagate

Seagate Personal Cloud SRN21C Manuel utilisateur

Seagate

Seagate GoFlex Satellite Manuel utilisateur

Seagate

Seagate Momentus Thin 5400-RPM Manuel utilisateur

Seagate

Seagate Barracuda 7200.14 Manuel utilisateur

Seagate

Seagate Expansion Manuel utilisateur

Seagate

Seagate Barracuda 7200.8 ST3400832A Manuel utilisateur

Seagate

Seagate Momentus 5400.2 Blade Server Manuel utilisateur

Seagate

Seagate CHEETAH 73LP Manuel utilisateur

Seagate

Seagate Expansion Manuel utilisateur

Seagate

Seagate 1200 SSD Manuel utilisateur

Seagate

Seagate ST1000NX0303 Manuel utilisateur

Seagate

Seagate BARRACUDA 2LP ST31250N/ND Manuel utilisateur

Seagate

Seagate One Touch SRD0VN2 Manuel utilisateur

Seagate

Seagate 10K.3 - Savvio 300 GB Hard Drive Instructions d'utilisation et de sécurité

Seagate

Seagate HAWK 4 Manuel utilisateur

Seagate

Seagate ST320014A Manuel utilisateur

Seagate

Seagate NAS ST4000VN000 Manuel utilisateur

Seagate

Seagate Spinpoint M8 Manuel utilisateur

Seagate

Seagate Cheetah 15K.4 SAS ST3146854SS Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur