Seagate HAWK 4 Famil Manuel utilisateur

HAWK 4 Family:

. . . . . . . . . . . . . . . . . . . . . . .

(Wide Bus)

ST15230W/WD/WC

. . . . . . . . . . . . . . . . . . . . . . .

ST15230DC

. . . . . . . . . . . . . . . . . . . . . . .

Installation Guide

Contents

Introduction........................................................... 1

Electromagneticinterference ................................ 1

Before you begin .................................................. 3

Installation overview....................................... 8

Product repair information .................................... 10

Shipping ......................................................... 11

Product repair and return information............. 11

Technical support services............................. 12

Drive specifications............................................... 15

Initial set-up information........................................ 18

Drive configuration................................................ 23

Drive installation ................................................... 33

Publication Number: 77767477, Rev. A

October 1994

Seagate®,SeagateTechnology®andtheSeagatelogo

areregisteredtrademarksofSeagateTechnology,Inc.

HawkTM, SeaFAXTM, SeaFoneTM, SeaTDDTM and

SeaBOARDTM aretrademarksofSeagateTechnology,

Inc.Otherproductnamesareregisteredtrademarksor

trademarks of their own.

Seagate reserves the right to change, without notice,

product offerings of specifications. No part of this

publication may be reproduced in any form without

written permission from Seagate Technology, Inc.

Hawk 4 (Wide) Family Install Guide, Rev. A 1

___________________________________________

Introduction

Beforeattemptinganyinstallation,pleasereadthrough

all applicable sections of this document, including all

warnings and cautions.

Warning. This equipment generates, uses and can

radiate radio frequency energy and if not

installedin accordance with these instruc-

tions,maycauseinterferencetoradiocom-

munications.

Electromagnetic interference (EMI) con-

siderations

The drive(s) described herein, as delivered, are de-

signed for system integration and installation into a

suitable enclosure prior to use. As such, the drive(s)

described herein are supplied as a sub-assembly and

arenotsubjecttoSubpartJofPart15oftheFCCRules

and Regulations nor the Radio Interference Regula-

tionsoftheCanadianDepartmentofCommunications.

However,theunithasbeentestedusingpropershield-

ing and grounding and found to be compliant with the

ClassAlimitsoftheFCCRulesandtheRegulations of

the Canadian Department of Communications.

2 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

The physical design characteristics of the drive(s)

described herein, serve to minimize EMI radiation

when installed in an enclosure that provides reason-

able shielding. As such, the drive(s) are capable of

meeting the Class B limits of the FCC Rules and the

RegulationsoftheCanadianDepartmentofCommuni-

cations.

Note. It is the end users' responsibility to assure that

the drive(s) described herein meet the appro-

priateEMIrequirementsoftheirsystem.Shielded

I/Ocablesmayberequirediftheenclosuredoes

notprovideadequateshielding. IfI/Ocables are

externaltotheenclosure,shieldedcablesshould

beused, with theshieldsgrounded to theenclo-

sure and to the host controller.

Hawk 4 (Wide) Family Install Guide, Rev. A 3

___________________________________________

Before you begin

Verify that the system is switched off and discon-

nected from main power before any installation is

attempted.

Protect yourself, the drive, and your valuable pro-

grams and data by reading the following cautions

and warnings.

•Donot unpackdrivefrom its staticshielded bag until

you are ready to install it in the system.

•Always handle the drive by the frame or casting.

•Do not touch printed circuit board (PCB) or the I/O

connector pins.

•Never apply pressure to the PCB or to the drive top

cover.

•Donot tamperwithsealed top cover.Doing so voids

your warranty. The drive contains no user service-

able components. See Product Repair section for

moreinformation.

•Visually inspect the shipping container for any obvi-

ous damage.

4 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

•Inspectdriveforpossibleshippingdamage.Allclaims

of this type should be filed promptly with the trans-

porterinvolved.Saveoriginalpackingmaterialstobe

used when reshipping.

•Verifyallpartslistedonshippingbillarereceivedwith

theequipment.Discrepanciesor damage should be

reported to the shipping company.

•When transporting or shipping a drive or system,

please ensure that they are correctly packed in

original Seagate approved (or equivalent) container

and shipped via an air-ride carrier experienced in

handling computer equipment.

Caution. Thecircuitassembliesandcomponentscon-

tainedinthisequipmentcanbedegradedor

destroyedbyElectrostaticOverstress(EOS)

or by Electrostatic Discharge (ESD).

Static electrical charges can accumulate

quicklyonpersonnel,clothingandsynthetic

materials. The electrostatic fields due to

these charges when brought in close prox-

imity to susceptible circuit assemblies and

components,canresultindegradedreliabil-

ity or immediate failure of the affected com-

ponent or assembly.

Hawk 4 (Wide) Family Install Guide, Rev. A 5

___________________________________________

To insure optimum reliable equipment op-

eration, it is required that technical support

personneldischargethemselvesbywearing

a grounding strap around the wrist and be

connected to a grounding terminal while

workingin thevicinity of,andwhile handling

EOS/ESD susceptible assemblies/parts. If

unavailable, ground yourself frequently by

touching the metal chassis of the system

beforehandlinganycomponents(thishelps

onlyifthesystemisconnectedtoaground).

Avoid static-inducing carpeted areas.

This

procedureisespeciallyimportantwhenhan-

dling printed circuit boards (PCBs).

6 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

Safety instructions

1. The disc drive(s) are to be installed in a customer

suppliedenclosurewherethesurroundingairdoes

not exceed 50oC.

2. Four (4) 6-32 UNC-2A screws are required for

installation. Maximum screw length into side of

drive is 0.15 inches (3.81 mm). Maximum screw

lengthintobottomis0.20in.(5.08mm).Maximum

screw tightening torque is 6.0 in-lb (.675 NM) with

minimumthreadengagementof.12in.(3.05mm).

3. Thepower requirements areshown in Section1.0

ProductInformation.

4. The power supply must satisfy the safety require-

ments for SELV (Safety Extra Low Voltage) cir-

cuits.

5. Service is to be provided by trained Seagate ser-

vice personnel.

6. The incorporation of the disc drives listed in this

guide into a customer enclosure must meet the

appropriate safety requirements of the country in

which it is used (e.g. UL 1950, CAN/CSA-C22.2

No.950-M89,DINVDE0805:1993andEN60950:

1992 (IEC 950).

Note. Power must be off when connecting or discon-

necting.

Hawk 4 (Wide) Family Install Guide, Rev. A 7

___________________________________________

Sicherheitsanleitung

1. DäsGerätisteinEinbaugerät,vorgesehenfüreine

maximale Umgebungstemperatur von 50oC.

2. Zur Befestigung der Drive werden 4 Schrauben

benötigt (6-32 UNC-2A). Die maximale Länge der

Schrauben in der unteren Seite des Chassis darf

nicht mehr als 0.20 in (5.08 mm) betragen, die in

der oberen 0.15 in (3.81 mm). Maximalle

Schraubenanziehung von 6.0 in-lb. (.675 NM) mit

minimalen Gewindeansperuch .12 in. (3.05 mm).

3. Die Versorgungsspannungen werden im Kapitel

1.0 (Produkt Information) gezeigt.

4. Die Versorgungsspannung muss SELV entspre-

chen.

5. AlleArbeitendürfennurvonausgebildetemSeagate

Service-Personal durchgefürhrt werden.

6. Der Einbau des Drives muss den Anforderungen

gemässDINVDE0805:1993oderEN60950:1992

(IEC 950).

Vorsicht

ÁnsehlussoderEntfernungolerGeräteverbindungnur

beiabgeschalteterVersorgungsspannungvornehmen.

8 Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

Installation Overview

Installation of the drive can be divided into distinct

phases as outlined below. Some of these may not be

applicable to your particular installation requirements.

Refer to the individual drive installation sections for

specific information on your drive model.

•Driveconfiguration:Theusermustselectwhichof

thedrivefeaturesareappropriatetoenableforinstal-

lationintheirsystem.Thisisdonebywayoftheuser

configuration jumpers found on the drive PCB.

•Mechanical installation: After setting up the drive

configuration the drive must be mechanically in-

stalledinto the host system and the power and I/O

cables attached. Previously mentioned precautions

should be observed

•SCSI drives should not be defined in the CMOS:

The SCSI Host adapter has its own BIOS to handle

the Input/output procedures. The CMOS setting for

SCSI drive is either drive type zero, or the "no drive

installed"option.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Seagate Stockage

Seagate

Seagate Momentus 7200.1 PATA ST910021A Manuel utilisateur

Seagate

Seagate DB35.4 - Series 250 GB Hard Drive Manuel utilisateur

Seagate

Seagate Cheetah 15K Manuel utilisateur

Seagate

Seagate ST31080N Manuel utilisateur

Seagate

Seagate PCIe Gen4 NVMe SSD + Heatsink Game Drive M.2 Manuel utilisateur

Seagate

Seagate ST9500420AS - Momentus 7200.4 500 GB Hard... Manuel utilisateur

Seagate

Seagate EXOS 7E8 SATA Manuel utilisateur

Seagate

Seagate Cheetah 10K.7 SCSI Manuel utilisateur

Seagate

Seagate Momentus ST91008220AS Manuel utilisateur

Seagate

Seagate TapeStor STT28000a Manuel utilisateur

Seagate

Seagate Barracuda 7200.7 ST3120228AS Manuel utilisateur

Seagate

Seagate OneTouch III Manuel utilisateur

Seagate

Seagate ST3500601XS-RK - 500 GB External Hard Drive Manuel utilisateur

Seagate

Seagate FreeAgent GoFlex Desk 3TB Manuel utilisateur

Seagate

Seagate IRONWOLF PRO ST10000NT001 Manuel utilisateur

Seagate

Seagate Barracuda ST3808110AS Manuel utilisateur

Seagate

Seagate Savvio 10K Manuel utilisateur

Seagate

Seagate ST11200N Manuel utilisateur

Seagate

Seagate ST3146855LC - Cheetah 146.8 GB Hard Drive Manuel utilisateur

Seagate

Seagate ST423451N Manuel utilisateur

Seagate

Seagate SAVVIO ST9300405SS Manuel utilisateur

Seagate

Seagate STT320000A Manuel technique

Seagate

Seagate Pulsar.2 ST200FM0002 Manuel utilisateur

Seagate

Seagate ST612712DEG Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur