Seada GENESIS 265 Manuel utilisateur

GENESIS™265 User Guide

This user guide provides instructions for setting up SEADA GENESIS™265 using the G265

UMPlatform, G265 Designer Software and G265 Client.

Table of Contents

1. G265 Introduction..........................................................................................................................1

1.1. G265 Overview................................................................................................................................... 1

1.2. Key Features....................................................................................................................................... 1

1.3. Specifications ..................................................................................................................................... 2

1.4. Models................................................................................................................................................ 2

1.5. System Diagram ................................................................................................................................. 2

2. Connection Setup...........................................................................................................................3

2.1. Set up the G265 transceiver............................................................................................................... 3

2.2. Ethernet (LAN) connection with the control PC................................................................................. 3

3. Config the G265 transceiver............................................................................................................4

3.1. Main Tabs........................................................................................................................................... 4

3.2. Information Tabs................................................................................................................................ 5

3.3. Sub Tabs –Input (Encoder –TX) ........................................................................................................ 6

3.4. Sub Tabs –Output (Decoder –RX)..................................................................................................... 8

4. G265 Designer Software User Guide .............................................................................................10

4.1. Login Window .................................................................................................................................. 10

4.2. Designer Menu................................................................................................................................. 11

4.3. Designer Tool Menu......................................................................................................................... 12

4.4. UI Design Area.................................................................................................................................. 13

4.5. UI Tool Menu.................................................................................................................................... 14

4.6. UI Design –UI Menu ........................................................................................................................ 15

4.6.1. New Page .................................................................................................................................. 16

4.6.2. Rectangle .................................................................................................................................. 18

4.6.3. Text ........................................................................................................................................... 19

4.6.4. Button ....................................................................................................................................... 20

4.6.5. Slider ......................................................................................................................................... 22

4.6.6. Signal......................................................................................................................................... 23

4.6.7. Panel ......................................................................................................................................... 24

4.6.8. List............................................................................................................................................. 25

4.6.9. Get back .................................................................................................................................... 26

4.6.10. Matrix...................................................................................................................................... 27

4.7. Panel Setting .................................................................................................................................... 28

4.7.1. Scan Output .............................................................................................................................. 28

4.7.2. Bind windows to outputs.......................................................................................................... 28

4.7.3. Mode......................................................................................................................................... 28

4.7.4. Audio Follow ............................................................................................................................. 28

4.8. Input Setting..................................................................................................................................... 29

4.8.1. Scan Input ................................................................................................................................. 29

4.8.2. Config Inputs............................................................................................................................. 29

4.8.3. New Group................................................................................................................................ 29

4.8.4. Group Signal.............................................................................................................................. 29

4.9. User.................................................................................................................................................. 30

4.9.1. New User................................................................................................................................... 30

5. G265 Client User Guide.................................................................................................................31

5.1. Login Window .................................................................................................................................. 31

5.2. Run G265 Client on the control PC .................................................................................................. 32

5.3. System Control................................................................................................................................. 33

6. Practical Example.........................................................................................................................34

7.1. Set up a G265 Client for output panel, IPC control, audio control and system control .................. 34

7. Troubleshooting...........................................................................................................................37

Commands for the G265 transceiver.................................................................................................39

SD-EN-030 1 / 40 V1.0

1. G265 Introduction

1.1. G265 Overview

The GENESIS™265 (G265) Transceivers (encoder and decoder in one unit) are designed to transmit video

and audio over standard Gigabit Ethernet with low latency and high image quality in real-time.

As a decoder, with its unique decoding ability to decode up to 16 IP streams, the G265 can be used as

multi-viewers or matrix switchers incorporated with RTSP IP sources for applications in security,

conference, corporation, university etc. Its state-of-art management software enables ‘drag and drop’

resulting in unlimited IP decoding on single unit.

As an encoder, G265 can offer features like content cropping, OSD, source marking which makes it more

flexible for all sorts of applications.

Thanks to its standard H.265/264 protocol and low bandwidth requirement, The G265 can work with the

existing network infrastructure which means there are no needs for dedicated cabling.

1.2. Key Features

• Fanless design, no moving parts

• Supports H.265/264 for high quality AV-over-IP

• Supports multi-view and matrix switching

• Supports inputs any size, anywhere on screen

• Supports PoE

• Supports both digital and analog audio

• Supports RS232, RS485, IR, Relay and I/O

• Supports up to 3840 x 2160

• Supports up to 16 inputs per screen as decoder

• Supports up scaling and down scaling

• Supports scrolling text and OSD

• Supports input content cropping

• Supports drag and drop

• Supports marking on source

• Supports custom desktop background image

• Supports input signal real-time preview

• Supports working with 3rd party RTSP decoders

• Supports 3rd party RTSP sources (e.g., IP camera) decoding/displaying

• Supports Multicast

• Supports preset layouts

• Low latency

SD-EN-030 2 / 40 V1.0

1.3. Specifications

1.4. Models

Models

G265HDRT

G2654KRTF

G2654KRTP

Type

Transceiver

Video Input

1 x HDMI

Maximum Windows per Screen

Video Output

1 x HDMI

1.5. System Diagram

Input / Output Protocol

RTSP

Output Format

H.265/H264

RS232 Connection

Phoenix connector

Power Supply

12DC from main power adapter or PoE

Audio Input / Output Connector

Phoenix connector

Audio Input Format

Unbalanced

Operating Temperature Range

0~40 degrees centigrade

Operating Humidity Range

10%~90% non-condensing

Storage Temperature Range

-20~60 degrees centigrade

Storage Humidity Range

10%~90% non-condensing

Cooling

Passive cooling

Warranty

2 years

SD-EN-030 3 / 40 V1.0

2. Connection Setup

2.1. Set up the G265 transceiver

Before starting up, user first needs to set up the G265 transceiver. The steps will be as follow:

1. Use CAT6 (or higher) to connect G265 transceiver with an IP switch supports PoE (optional).

2. Check the switch on the back of device and ensure it is on TX for encoders and RX for decoders.

3. Connect ‘HDMI output’on G265 decoder to an output, such as a screen, with an HDMI cable.

4. Connect input sources, such as media players and PCs, to ‘HDMI input’ on G265 encoders.

5. Connect any 3rd party RTSP IP sources, such as IP cameras and 3rd party encoders, into the same

IP switch as the G265 transceiver with CAT6 (or higher).

6. Connect any other 3rd party devices to the G265 transceiver, or to the IP switch.

7. Connect the control PC to the same IP switch as the G265 transceiver.

2.2. Ethernet (LAN) connection with the control PC

The default static IP address of the G265 transceiver is 192.168.1.208. User needs to change IP address of

the control PC to a static IP address and the same network segment as the device at TCP/IPv4 in ‘Ethernet

Properties’.

•IP address: any address between

192.168.1.2 and 192.168.1.254 except the

address which has been taken by the G265

transceiver.

•Subnet Mask: 255.255.255.0

•Default Gateway: 192.168.1.1

SD-EN-030 4 / 40 V1.0

3. Config the G265 transceiver

Run ‘G265 UMPlatform’, user can change parameters, such as the network setting and output setting, for

the G265 transceiver if necessary.

3.1. Main Tabs:

This tab provides basic functions to operate the G265 transceiver.

Input/Output: Switch between the list for the encoders and decoders.

Scan: Scan and display all G265 transceiver under the current Input/Output list.

Restart: Restart all the selected devices.

Select All: Select all the devices in the current Input/Output list.

Reverse Select: Reverse-select the devices in the current Input/Output list.

Scan Setting: Bind the local IP address of the control PC to scan the devices. If the device is not displayed

in the list after pressing ‘Scan’, use this button to bind the device and scan again.

Reset: Reset the selected device. The selected device must be restarted after being reset.

Advanced options: Gain access to additional functions for internal engineering use only.

SD-EN-030 5 / 40 V1.0

3.2. Information-Tabs:

This tab contains information about the G265 transceiver.

Input/Output IP: The IP address of the device.

Firmware Version: The firmware version of the device.

SD-EN-030 6 / 40 V1.0

3.3. Sub-Tabs –Input (Encoder - TX):

This tab provides customised configurations for the selected encoders.

(Always click ‘Apply’ to apply modifications to the device)

To use G265 transceivers as RTSP encoders for 3rd party decoders, the mainstream address is

rtsp://192.168.1.208/0 and substream address is rtsp://192.168.1.208/1.

Network setting: Config the network parameters for the device, including name, IP address, subnet

mask, gateway, and MAC address.

Encoding setting: Config settings for the mainstream and substream of the device.

Audio setting: Config the audio setting for the encoder. The default setting is ‘3.5mm’, corresponding to

the ports on the back of the device. User can change it to ‘HDMI’ to use the HDMI port.

I/O setting: User can set up the encoder to control third-party devices. This includes system control via

RS232, RS485, I/O, IR, TCP/IP, and Relay.

Led setting: Config the device for the use of LED screen.

Advanced setting: Config the functions of the selected G265 encoder.

•Multi-cast: Config multi-cast steaming.

•Loop out: Configure the signal from the loop-out device, such as brightness and sharpness.

SD-EN-030 7 / 40 V1.0

•Master-slave: Change the master-slave mode. Ensure that there is only one ‘Master’ in both

the encoders and decoders.

•Crop: Crop the input signal to any size.

•OSD: Add OSD onto the input signal.

•System Info: The information of the device. As ‘Switch to output’ function is no longer being

used, user needs to toggle the switch on the back of the G265 transceiver and restart it to

switch between encoder and decoder.

System query: Display the system log of the selected device.

Firmware Update: Update the firmware of the selected G265 transceiver. Note that this function is only

visible when the software is full screen.

Autres manuels pour GENESIS 265

Table des matières

Autres manuels Seada Émetteur-récepteur

Seada

Seada GENESIS 265 Manuel d'instructions

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur