1 Safety Instructions
Warning!
•Read the operating instructions in
full before use and follow the safety
instructions
•Ensure that only trained staff work with
the appliance.
Protective ground contact！
•Make sure that socket is earthed
(protective ground contact) before use.
•When work ，wear the personal guard to avoid the risk
from:
- Splashing of liquids.
- Release of toxic or combustible gases.
•Set up the instrument in a spacious area on an even,
stable,clean, non-slip, dry and fireproof surface, do not
operate the instrument in explosive atmospheres, with
hazardous substances or under water.
•Gradually increase the speed, reduce the speed if :
- The medium splashes out of the vessel because of too
high speed.
- The instrument is not running smoothly.
•Beware of hazards due to:
- Overfilling of media
- Unsafe container
•Process pathogenic materials only in closed vessels.
•Always disconnect the plug before fitting accessories.Do
not use damaged components.
•The operating voltage required on the type plate and
voltage supply network must match.
•Ensure that the mains power supply cable does not touch
the hotplate. Do not cover the instrument.
•The instrument may only be opened by experts .
•Observe the minimum distances between the devices,
between the instrument and the wall and above the assembly
(min. 100 mm).
